| 
 | JavaTM 2 Platform Standard Edition | |||||||||
| PREV LETTER NEXT LETTER | FRAMES NO FRAMES | |||||||||
DATA_CONVERSION exception, which is thrown
 when there is a data conversion error.DATA_CONVERSION exception with a default minor code
 of 0 and a completion state of COMPLETED_NO.
DATA_CONVERSION exception with the specified
 minor code and completion status.
DATA_CONVERSION exception with the specified detail.
DATA_CONVERSION exception with the specified detail
 message, minor code, and completion status.
DataBuffer and stores data internally as bytes.DataBuffer with the specified arrays.
DataBuffer with the specified arrays, size,
 and offsets.
DataBuffer with a single bank using the
 specified array.
DataBuffer with a single bank using the
 specified array, size, and offset.
DataBuffer with a single bank and the
 specified size.
DataBuffer with the specified number of
 banks all of which are the specified size.
DataBuffer and stores data internally 
 as integers.DataBuffer with a single bank 
 and the specified size.
DataBuffer with the specified arrays.
DataBuffer with the specified arrays, size,
 and offsets.
DataBuffer with a single bank using the
 specified array.
DataBuffer with a single bank using the
 specified array, size, and offset.
DataBuffer with the specified number of
 banks, all of which are the specified size.
DataBuffer and stores data internally as shorts.DataBuffer with a single bank and the
 specified size.
DataBuffer with the specified number of
 banks all of which are the specified size.
DataBuffer with the specified arrays.
DataBuffer with the specified arrays, size,
 and offsets.
DataBuffer with a single bank using the
 specified array.
DataBuffer with a single bank using the
 specified array, size, and offset.
DataBuffer and stores data internally as
 shorts.DataBuffer with a single bank and the
 specified size.
DataBuffer with the specified number of
 banks, all of which are the specified size.
DataBuffer with the specified arrays.
DataBuffer with specified arrays,
 size, and offsets.
DataBuffer with a single bank
 using the specified array.
DataBuffer with a single bank
 using the specified array, size, and offset.
DatagramPacket for receiving packets of 
 length length.
length to the specified port number on the specified 
 host.
DatagramPacket for receiving packets of 
 length length, specifying an offset into the buffer.
length with offset ioffsetto the
 specified port number on the specified host.
DataInput interface provides
 for reading bytes from a binary stream and
 reconstructing from them data in any of
 the Java primitive types.FilterInputStream
 and saves its  argument, the input stream
 in, for later use.
DataOutput interface provides
 for converting data from any of the Java
 primitive types to a series of bytes and
 writing these bytes to a binary stream.DataTruncation object 
 with the SQLState initialized
 to 01004, the reason set to "Data truncation", the
 vendorCode set to the SQLException default, and
 the other fields set to the given values.
Date represents a specific instant
 in time, with millisecond precision.get and set indicating the
 day of the month.
Date object and initializes it so that 
 it represents the time at which it was allocated, measured to the 
 nearest millisecond.
Date(long date)
Calendar.set(year + 1900, month, date)
 or GregorianCalendar(year + 1900, month, date).
Calendar.set(year + 1900, month, date,
 hrs, min) or GregorianCalendar(year + 1900,
 month, date, hrs, min).
Calendar.set(year + 1900, month, date,
 hrs, min, sec) or GregorianCalendar(year + 1900,
 month, date, hrs, min, sec).
Date object 
 using a milliseconds time value.
Date object and initializes it to 
 represent the specified number of milliseconds since the 
 standard base time known as "the epoch", namely January 1, 
 1970, 00:00:00 GMT.
DateFormat.parse(String s).
DateFormatSymbols is a public class for encapsulating
 localizable date-time formatting data, such as the names of the
 months, the names of the days of the week, and the time zone data.get and set indicating the
 day of the month.
get and set indicating the
 day of the week.
get and set indicating the
 ordinal number of the day of the week within the current month.
get and set indicating the
 day number within the current year.
MONTH field indicating the
 twelfth month of the year.
DecimalFormat is a concrete subclass of NumberFormat
 for formatting decimal numbers.DecimalFormat
 to format numbers.Font that the str 
 argument describes.
String into a Short.
String into a Long.
String into an Integer.
DefinitionKind corresponding to this Interface Repository object.
int used by updateCurrentCursor() 
 indicating that the Cursor should change
 to the default (no drop) Cursor.
CaretPolicy is used when a policy is not specified 
 by the client.
Cursor.DEFAULT_CURSOR.
defaultConstraints.
Cursor to use with a copy operation 
 indicating that a drop is currently allowed.
Cursor to use with 
 a copy operation indicating that a drop is currently not allowed.
Cursor to use with a 
 link operation indicating that a 
 drop is currently allowed.
Cursor to use 
 with a link operation indicating 
 that a drop is currently not allowed.
Cursor to use 
 with a move operation indicating that 
 a drop is currently allowed.
Cursor to use with a move 
 operation indicating that a drop is currently not allowed.
DefaultMutableTreeNode is a general-purpose node in a tree data
 structure.PageFormat instance and
 sets it to a default size and orientation.
PageFormat argument and alters the
 clone to describe a default page size and orientation.
Class.
value member described by this
 ValueMember object.
Context object the
 NamedValue object(s) whose
 name field matches the given property name.
StringBuffer.
LineBreakMeasurer after a single
 character is deleted from the text.
StringBuffer (shortening the StringBuffer
 by one character).
MenuShortcut object associated
 with this menu item.
remove(String)
                         and remove(int).
dispatchEvent(AWTEvent e).
dispatchEvent(AWTEvent e)
ptSrc and stores the result in ptDst.
Font object by replicating the current
 Font object and applying a new transform to it.
Font object by replicating the current
 Font object and applying a new size to it.
Font object by replicating the current
 Font object and applying a new style to it.
Font object by replicating this
 Font object and applying a new style and transform.
Font object by replicating this
 Font object and applying a new style and size.
Font object by replicating the current
 Font object and applying a new set of font attributes
 to it.
DynAny object and frees any resources
 used to represent the data value associated with it.
Dictionary class is the abstract parent of any 
 class, such as Hashtable, which maps keys to values.ch in the 
 specified radix.
Dimension class encapsulates the width and 
 height of a component (in integer precision) in a single object.Dimension with a width 
 of zero and a height of zero.
Dimension whose width  
 and height are the same as for the specified dimension.
Dimension2D class is to encapsulate a width 
 and a height dimension.setEnabled(boolean).
setEnabled(boolean).
TypeCode object describing
 all non-default member labels.
run() method and notifies the
 notifier (if any) when run() returns.
Graphics.dispose.
Point2D to 
 a specified point.
Point2D to a
 specified Point2D.
Point2D to a specified point.
Point2D to a specified Point2D.
DefinitionKind is appropriate.
setDoInput method.
newCall, invoke, and done), a
 stub uses a single method, invoke(Remote, Method, Object[],
 int), on the remote reference to carry out parameter
 marshalling, remote method executing and unmarshalling of the return
 value.
 JDK1.2 stubs are generated using rmic -v1.2. By
 default, rmic generates stubs compatible with JDK1.1 and
 JDK1.2. The compatible stubs can also be generated using rmic
 -vcompat.
setDoOutput method.
PrivilegedAction with privileges
 enabled.
PrivilegedAction with privileges
 enabled and restricted by the specified AccessControlContext.
PrivilegedExceptionAction with
 privileges enabled.
PrivilegedExceptionAction with 
 privileges enabled and restricted by the specified
 AccessControlContext.
double in an object.Double object that
 represents the primitive double argument.
Double object that
 represents the floating- point value of type double
 represented by the string.
double
 that is used to store "out" and "inout" parameters in IDL methods.DoubleHolder object with its
 value field initialized to 0.0.
DoubleHolder object for the given
 double.
double.
DragSourceDropEvent 
 associated with dragDropEnd() from the peer.
DragSourceDragEvent
 associated with dragEnter() from the peer.
DropTarget.
DropTarget intercepts 
 dragEnter() notifications before the 
 registered DropTargetListener gets them.
DragSourceEvent
 associated with dragExit() from the peer.
DropTarget without dropping.
DropTarget intercepts 
 dragExit() notifications before the 
 registered DropTargetListener gets them.
DragGestureEvent is passed 
 to DragGestureListener's  
 dragGestureRecognized() method
 when a particular DragGestureRecognizer detects that a 
 platform dependent drag initiating gesture has occurred 
 on the Component that it is tracking.DragGestureEvent given the
 DragGestureRecognizer firing this event, 
 an int representing
 the user's preferred action, a Point 
 indicating the origin of the drag, and a List 
 of events that comprise the gesture.
DragGestureListener 
 associated with this DragGestureRecognizer.
DragGestureRecognizer 
 and is invoked
 when an object of that (sub)class detects a drag initiating
 gesture.DragGestureRecognizer has detected 
 a platform-dependent drag initiating gesture and 
 is notifying this listener
 in order for it to initiate the action for the user.
DragGestureRecognizer is an 
 abstract base class for the specification
 of a platform-dependent listener that can be associated with a particular
 Component in order to 
 identify platform-dependent drag initiating gestures.DragGestureRecognizer 
 given the DragSource to be used in this 
 Drag and Drop operation.
DragGestureRecognizer 
 given the DragSource to be used 
 in this Drag and Drop operation, and 
 the Component this 
 DragGestureRecognizer 
 should "observe" for drag initiating gestures.
DragGestureRecognizer 
 given the DragSource to be used in this 
 Drag and Drop
 operation, the Component this 
 DragGestureRecognizer should "observe" 
 for drag initiating gestures, and the action(s) 
 supported for this Drag and Drop operation.
DragGestureRecognizer 
 given the DragSource to be used 
 in this Drag and Drop operation, the Component 
 this DragGestureRecognizer should "observe" 
 for drag initiating gestures, the action(s) supported 
 for this Drag and Drop operation, and the 
 DragGestureListener to notify
 once a drag initiating gesture has been detected.
DragSourceDragEvent
 associated with dragOver() from the peer.
DropTarget.
DropTarget 
 intercepts dragOver() notifications before the
 registered DropTargetListener gets them.
DragSource 
 associated with this 
 DragGestureRecognizer.
DragSource is the entity responsible 
 for the initiation of the Drag
 and Drop operation, and may be used in a number of scenarios: 
 
 1 default instance per JVM for the lifetime of that JVM.DragSource.
DragSource, this 
 constructor creates 
 a new DragSourceContext given the 
 DragSourceContextPeer for this Drag, 
 the DragGestureEvent that triggered the Drag, 
 the initial Cursor to use for the Drag, an (optional) 
 Image to display while the Drag is taking place, 
 the offset of the Image origin from the 
 hotspot at the instant of the triggering event, 
 the Transferable subject data, and the 
 DragSourceListener to use during the Drag and 
 Drop operation.
DragSourceDragEvent is 
 delivered from the DragSourceContextPeer,
 via the DragSourceContext, to the currently 
 registered DragSourceListener.DragSourceDragEvent.
DragSourceDropEvent is delivered 
 from the DragSourceContextPeer,
 via the DragSourceContext, to its currently 
 registered DragSourceListener's dragDropEnd()
 method.DragSourceDropEvent
 for a drag that does not result in a drop.
DragSourceDropEvent for a drop, 
 given the 
 DragSourceContext, the drop action, 
 and a boolean indicating if the drop was successful.
DragSourceDragEvent and 
 DragSourceDropEvent.DragSourceEvent
 given a specified DragSourceContext.
DragSourceListener defines the 
 event interface for originators of
 Drag and Drop operations to track the state of the user's gesture, and to
 provide appropriate "drag over" 
 feedback to the user throughout the
 Drag and Drop operation.TextLayout at the specified location in 
 the specified Graphics2D context.
GraphicAttribute at the specified 
 location.
Shape using the settings of the 
 current Graphics2D context.
Graphics.draw3DRect.
Graphics.drawArc.
Graphics.drawBytes.
Graphics.drawChars.
GlyphVector using
 the Graphics2D context's rendering attributes.
BufferedImage that is
 filtered with a 
 BufferedImageOp.
Graphics.drawImage.
Graphics.drawImage.
Graphics.drawImage.
Graphics.drawImage.
Graphics.drawImage.
Graphics.drawImage.
(x1, y1) and (x2, y2) 
 in this graphics context's coordinate system.
Graphics.drawLine.
Graphics.drawOval.
Graphics.drawPolygon.
Polygon object.
Graphics.drawPolyline.
Graphics.drawRect.
RenderableImage,
 applying a transform from image space into user space before drawing.
RenderedImage,
 applying a transform from image 
 space into user space before drawing.
Graphics.drawRoundRect.
Graphics2D context's current Paint.
Graphics2D context's current Paint.
Graphics.drawString.
String, 
 using the current Font and Paint attributes 
 in the Graphics2D context.
String, using the 
 current Font and Paint attributes in the 
 Graphics2D context.
Graphics.drawString.
DriverPropertyInfo object with a name and value;
 other members default to their initial values.
DropTarget.
DropTarget intercepts drop() notifications before the 
 registered DropTargetListener gets them.
DragSourceDragEvent 
 associated with dropActionChanged() from the peer.
DropTarget intercepts 
 dropActionChanged() notifications before the 
 registered DropTargetListener gets them.
DragSource 
 that the drop transfer(s) are completed.
DropTarget is associated 
 with a Component when that Component 
 wishes
 to accept drops during Drag and Drop operations.DropTarget.
DropTarget given the Component 
 to associate itself with, and the DropTargetListener
 to handle event processing.
DropTarget given the Component 
 to associate itself with, an int representing
 the default acceptable action(s) to support, and a
 DropTargetListener to handle event processing.
DropTarget given the Component 
 to associate itself with, an int representing
 the default acceptable action(s) 
 to support, a DropTargetListener
 to handle event processing, and a boolean indicating 
 if the DropTarget is currently accepting drops.
Component 
 to associate itself with, an int representing
 the default acceptable action(s) to 
 support, a DropTargetListener
 to handle event processing, a boolean indicating 
 if the DropTarget is currently accepting drops, and 
 a FlavorMap to use (or null).
DropTargetContext is created 
 whenever the logical cursor associated
 with a Drag and Drop operation coincides with the visible geometry of
 a Component associated with a DropTarget.TransferableProxy is a 
 nested helper class that
 supports the DropTargetContext 
 in managing the transfer of data.DropTargetDragEvent is delivered to a 
 DropTargetListener via its
 dragEnter() and dragOver() methods.DropTargetDragEvent given the
 DropTargetContext for this operation,
 the location of the "Drag" Cursor's hotspot 
 in the Component's coordinates, the
 currently selected user drop action, and current 
 set of actions supported by the source.
DropTargetDropEvent is delivered 
 via the DropTargetListener drop() method.DropTargetDropEvent given
 the DropTargetContext for this operation, 
 the location of the drag Cursor's
 hotspot in the Component's coordinates, 
 the currently
 selected user drop action, and the current set of
 actions supported by the source.
DropTargetEvent given the 
 DropTargetContext for this operation,
 the location of the drag Cursor's hotspot 
 in the Component's 
 coordinates, the currently selected user drop action, 
 the current set of actions supported by the source,
 and a boolean indicating if the source is in the same JVM
 as the target.
DropTargetEvent is the base 
 class for both the DropTargetDragEvent
 and the DropTargetDropEvent.DropTargetEvent with 
 a specified DropTargetContext.
DropTargetListener interface 
 is the callback interface used by the
 DropTarget class to provide 
 notification of DnD operations that involve
 the subject DropTarget.get and set indicating the
 daylight savings offset in milliseconds.
AlphaComposite object that implements the opaque DST_IN rule
 with an alpha of 1.0f.
AlphaComposite object that implements the opaque DST_OUT rule
 with an alpha of 1.0f.
AlphaComposite object that implements the opaque DST_OVER rule
 with an alpha of 1.0f.
Any
  values.DynUnion interface represents a DynAny object
 that is associated with an IDL union.| 
 | JavaTM 2 Platform Standard Edition | |||||||||
| PREV LETTER NEXT LETTER | FRAMES NO FRAMES | |||||||||