Chapter聽18.聽Stored Procedures and Functions - MySQL 5.0参考手册英文版

CREATE
    [DEFINER = { user | CURRENT_USER }]
    PROCEDURE sp_name ([proc_parameter[,...]])
    [characteristic ...] routine_body

CREATE
    [DEFINER = { user | CURRENT_USER }]
    FUNCTION sp_name ([func_parameter[,...]])
    RETURNS type
    [characteristic ...] routine_body
    
proc_parameter:
    [ IN | OUT | INOUT ] param_name type
    
func_parameter:
    param_name type

type:
    Any valid MySQL data type

characteristic:
    LANGUAGE SQL
  | [NOT] DETERMINISTIC
  | { CONTAINS SQL | NO SQL | READS SQL DATA | MODIFIES SQL DATA }
  | SQL SECURITY { DEFINER | INVOKER }
  | COMMENT 'string'

routine_body:
    Valid SQL procedure statement

These statements create stored routines. To use them, it is necessary to have the CREATE ROUTINE privilege. If binary logging is enabled, the CREATE FUNCTION statement might may also require the SUPER privilege, as described in Section聽18.4, 鈥淏inary Logging of Stored Routines and Triggers鈥�. MySQL automatically grants the ALTER ROUTINE and EXECUTE privileges to the routine creator.

By default, the routine is associated with the default database. To associate the routine explicitly with a given database, specify the name as db_name.sp_name when you create it.

If the routine name is the same as the name of a built-in SQL function, you must use a space between the name and the following parenthesis when defining the routine, or a syntax error occurs. This is also true when you invoke the routine later. For this reason, we suggest that it is better to avoid re-using the names of existing SQL functions for your own stored routines.

The IGNORE_SPACE SQL mode applies to built-in functions, not to stored routines. it is always allowable to have spaces after a routine name, regardless of whether IGNORE_SPACE is enabled.

The parameter list enclosed within parentheses must always be present. If there are no parameters, an empty parameter list of () should be used.

Each parameter can be declared to use any valid data type, except that the COLLATE attribute cannot be used.

Each parameter is an IN parameter by default. To specify otherwise for a parameter, use the keyword OUT or INOUT before the parameter name.

Note: Specifying a parameter as IN, OUT, or INOUT is valid only for a PROCEDURE. (FUNCTION parameters are always regarded as IN parameters.)

An IN parameter passes a value into a procedure. The procedure might modify the value, but the modification is not visible to the caller when the procedure returns. An OUT parameter passes a value from the procedure back to the caller. Its initial value is NULL within the procedure, and its value is visible to the caller when the procedure returns. An INOUT parameter is initialized by the caller, can be modified by the procedure, and any change made by the procedure is visible to the caller when the procedure returns.

For each OUT or INOUT parameter, pass a user-defined variable so that you can obtain its value when the procedure returns. (For an example, see Section聽18.2.4, 鈥�CALL Statement Syntax鈥�.) If you are calling the procedure from within another stored procedure or function, you can also pass a routine parameter or local routine variable as an IN or INOUT parameter.

The RETURNS clause may be specified only for a FUNCTION, for which it is mandatory. It indicates the return type of the function, and the function body must contain a RETURN value statement. If the RETURN statement returns a value of a different type, the value is coerced to the proper type. For example, if a function specifies an ENUM or SET value in the RETURNS clause, but the RETURN statement returns an integer, the value returned from the function is the string for the corresponding ENUM member of set of SET members.

The routine_body consists of a valid SQL procedure statement. This can be a simple statement such as SELECT or INSERT, or it can be a compound statement written using BEGIN and END. Compound statement syntax is described in Section聽18.2.5, 鈥�BEGIN ... END Compound Statement Syntax鈥�. Compound statements can contain declarations, loops, and other control structure statements. The syntax for these statements is described later in this chapter. See, for example, Section聽18.2.6, 鈥�DECLARE Statement Syntax鈥�, and Section聽18.2.10, 鈥淔low Control Constructs鈥�. Some statements are not allowed in stored routines; see Section聽D.1, 鈥淩estrictions on Stored Routines and Triggers鈥�.

MySQL stores the sql_mode system variable setting that is in effect at the time a routine is created, and always executes the routine with this setting in force, regardless of the current server SQL mode.

The CREATE FUNCTION statement was used in earlier versions of MySQL to support UDFs (user-defined functions). See Section聽26.3, 鈥淎dding New Functions to MySQL鈥�. UDFs continue to be supported, even with the existence of stored functions. A UDF can be regarded as an external stored function. However, do note that stored functions share their namespace with UDFs. See Section聽9.2.4, 鈥淔unction Name Parsing and Resolution鈥�, for the rules describing how the server interprets references to different kinds of functions.

A procedure or function is considered 鈥�deterministic鈥� if it always produces the same result for the same input parameters, and 鈥�not deterministic鈥� otherwise. If neither DETERMINISTIC nor NOT DETERMINISTIC is given in the routine definition, the default is NOT DETERMINISTIC.

A routine that contains the NOW() function (or its synonyms) or RAND() is non-deterministic, but it might still be replication-safe. For NOW(), the binary log includes the timestamp and replicates correctly. RAND() also replicates correctly as long as it is invoked only once within a routine. (You can consider the routine execution timestamp and random number seed as implicit inputs that are identical on the master and slave.)

Currently, the DETERMINISTIC characteristic is accepted, but not yet used by the optimizer. However, if binary logging is enabled, this characteristic affects which routine definitions MySQL accepts. See Section聽18.4, 鈥淏inary Logging of Stored Routines and Triggers鈥�.

Several characteristics provide information about the nature of data use by the routine. In MySQL, these characteristics are advisory only. The server does not use them to constrain what kinds of statements a routine will be allowed to execute.

The SQL SECURITY characteristic can be used to specify whether the routine should be executed using the permissions of the user who creates the routine or the user who invokes it. The default value is DEFINER. This feature is new in SQL:2003. The creator or invoker must have permission to access the database with which the routine is associated. It is necessary to have the EXECUTE privilege to be able to execute the routine. The user that must have this privilege is either the definer or invoker, depending on how the SQL SECURITY characteristic is set.

The optional DEFINER clause specifies the MySQL account to be used when checking access privileges at routine execution time for routines that have the SQL SECURITY DEFINER characteristic. The DEFINER clause was added in MySQL 5.1.8.

If a user value is given, it should be a MySQL account in 'user_name'@'host_name' format (the same format used in the GRANT statement). The user_name and host_name values both are required. CURRENT_USER also can be given as CURRENT_USER(). The default DEFINER value is the user who executes the CREATE PROCEDURE or CREATE FUNCTION or statement. (This is the same as DEFINER = CURRENT_USER.)

If you specify the DEFINER clause, you cannot set the value to any account but your own unless you have the SUPER privilege. These rules determine the legal DEFINER user values:

When the routine is invoked, an implicit USE db_name is performed (and undone when the routine terminates). USE statements within stored routines are disallowed.

The server uses the data type of a routine parameter or function return value as follows. These rules also apply to local routine variables created with the DECLARE statement (Section聽18.2.7.1, 鈥�DECLARE Local Variables鈥�).

The COMMENT clause is a MySQL extension, and may be used to describe the stored routine. This information is displayed by the SHOW CREATE PROCEDURE and SHOW CREATE FUNCTION statements.

MySQL allows routines to contain DDL statements, such as CREATE and DROP. MySQL also allows stored procedures (but not stored functions) to contain SQL transaction statements such as COMMIT. Stored functions may not contain statements that do explicit or implicit commit or rollback. Support for these statements is not required by the SQL standard, which states that each DBMS vendor may decide whether to allow them.

Stored routines cannot use LOAD DATA INFILE.

Statements that return a result set cannot be used within a stored function. This includes SELECT statements that do not use INTO to fetch column values into variables, SHOW statements, and other statements such as EXPLAIN. For statements that can be determined at function definition time to return a result set, a Not allowed to return a result set from a function error occurs (ER_SP_NO_RETSET_IN_FUNC). For statements that can be determined only at runtime to return a result set, a PROCEDURE %s can't return a result set in the given context error occurs (ER_SP_BADSELECT).

The following is an example of a simple stored procedure that uses an OUT parameter. The example uses the mysql client delimiter command to change the statement delimiter from ; to // while the procedure is being defined. This allows the ; delimiter used in the procedure body to be passed through to the server rather than being interpreted by mysql itself.

mysql> delimiter //

mysql> CREATE PROCEDURE simpleproc (OUT param1 INT)
    -> BEGIN
    ->   SELECT COUNT(*) INTO param1 FROM t;
    -> END;
    -> //
Query OK, 0 rows affected (0.00 sec)

mysql> delimiter ;

mysql> CALL simpleproc(@a);
Query OK, 0 rows affected (0.00 sec)

mysql> SELECT @a;
+------+
| @a   |
+------+
| 3    |
+------+
1 row in set (0.00 sec)

When using the delimiter command, you should avoid the use of the backslash (鈥�\鈥�) character because that is the escape character for MySQL.

The following is an example of a function that takes a parameter, performs an operation using an SQL function, and returns the result. In this case, it is unnecessary to use delimiter because the function definition contains no internal ; statement delimiters:

mysql> CREATE FUNCTION hello (s CHAR(20)) RETURNS CHAR(50)
    -> RETURN CONCAT('Hello, ',s,'!');
Query OK, 0 rows affected (0.00 sec)

mysql> SELECT hello('world');
+----------------+
| hello('world') |
+----------------+
| Hello, world!  |
+----------------+
1 row in set (0.00 sec)

For information about invoking stored procedures from within programs written in a language that has a MySQL interface, see Section聽18.2.4, 鈥�CALL Statement Syntax鈥�.

ALTER {PROCEDURE | FUNCTION} sp_name [characteristic ...]

characteristic:
    { CONTAINS SQL | NO SQL | READS SQL DATA | MODIFIES SQL DATA }
  | SQL SECURITY { DEFINER | INVOKER }
  | COMMENT 'string'

This statement can be used to change the characteristics of a stored procedure or function. You must have the ALTER ROUTINE privilege for the routine. (That privilege is granted automatically to the routine creator.) If binary logging is enabled, the ALTER FUNCTION statement might also require the SUPER privilege, as described in Section聽18.4, 鈥淏inary Logging of Stored Routines and Triggers鈥�.

More than one change may be specified in an ALTER PROCEDURE or ALTER FUNCTION statement.

DROP {PROCEDURE | FUNCTION} [IF EXISTS] sp_name

This statement is used to drop a stored procedure or function. That is, the specified routine is removed from the server. You must have the ALTER ROUTINE privilege for the routine. (That privilege is granted automatically to the routine creator.)

The IF EXISTS clause is a MySQL extension. It prevents an error from occurring if the procedure or function does not exist. A warning is produced that can be viewed with SHOW WARNINGS.

CALL sp_name([parameter[,...]])
CALL sp_name[()]

The CALL statement invokes a procedure that was defined previously with CREATE PROCEDURE.

CALL can pass back values to its caller using parameters that are declared as OUT or INOUT parameters. It also 鈥�returns鈥� the number of rows affected, which a client program can obtain at the SQL level by calling the ROW_COUNT() function and from C by calling the mysql_affected_rows() C API function.

As of MySQL 5.1.13, stored procedures that take no arguments now can be invoked without parentheses. That is, CALL p() and CALL p are equivalent.

To get back a value from a procedure using an OUT or INOUT parameter, pass the parameter by means of a user variable, and then check the value of the variable after the procedure returns. (If you are calling the procedure from within another stored procedure or function, you can also pass a routine parameter or local routine variable as an IN or INOUT parameter.) For an INOUT parameter, initialize its value before passing it to the procedure. The following procedure has an OUT parameter that the procedure sets to the current server version, and an INOUT value that the procedure increments by one from its current value:

CREATE PROCEDURE p (OUT ver_param VARCHAR(25), INOUT incr_param INT)
BEGIN
  # Set value of OUT parameter
  SELECT VERSION() INTO ver_param;
  # Increment value of INOUT parameter
  SET incr_param = incr_param + 1;
END;

Before calling the procedure, initialize the variable to be passed as the INOUT parameter. After calling the procedure, the values of the two variables will have been set or modified:

mysql> SET @increment = 10;
mysql> CALL p(@version, @increment);
mysql> SELECT @version, @increment;
+-----------------+------------+
| @version        | @increment |
+-----------------+------------+
| 5.1.12-beta-log | 11         | 
+-----------------+------------+

If you write C programs that use the CALL SQL statement to execute stored procedures that produce result sets, you must set the CLIENT_MULTI_RESULTS flag, either explicitly, or implicitly by setting CLIENT_MULTI_STATEMENTS when you call mysql_real_connect(). This is because each such stored procedure produces multiple results: the result sets returned by statements executed within the procedure, as well as a result to indicate the call status. To process the result of a CALL statement, use a loop that calls mysql_next_result() to determine whether there are more results. For an example, see Section聽24.2.9, 鈥淐 API Handling of Multiple Statement Execution鈥�.

For programs written in a language that provides a MySQL interface, there is no native method for directly retrieving the results of OUT or INOUT parameters from CALL statements. To get the parameter values, pass user-defined variables to the procedure in the CALL statement and then execute a SELECT statement to produce a result set containing the variable values. The following example illustrates the technique (without error checking) for a stored procedure p1 that has two OUT parameters.

mysql_query(mysql, "CALL p1(@param1, @param2)");
mysql_query(mysql, "SELECT @param1, @param2");
result = mysql_store_result(mysql);
row = mysql_fetch_row(result);
mysql_free_result(result);

After the preceding code executes, row[0] and row[1] contain the values of @param1 and @param2, respectively.

To handle INOUT parameters, execute a statement prior to the CALL that sets the user variables to the values to be passed to the procedure.

[begin_label:] BEGIN
    [statement_list]
END [end_label]

BEGIN ... END syntax is used for writing compound statements, which can appear within stored routines and triggers. A compound statement can contain multiple statements, enclosed by the BEGIN and END keywords. statement_list represents a list of one or more statements. Each statement within statement_list must be terminated by a semicolon (;) statement delimiter. Note that statement_list is optional, which means that the empty compound statement (BEGIN END) is legal.

Use of multiple statements requires that a client is able to send statement strings containing the ; statement delimiter. This is handled in the mysql command-line client with the delimiter command. Changing the ; end-of-statement delimiter (for example, to //) allows ; to be used in a routine body. For an example, see Section聽18.2.1, 鈥�CREATE PROCEDURE and CREATE FUNCTION Syntax鈥�.

A compound statement can be labeled. end_label cannot be given unless begin_label also is present. If both are present, they must be the same.

The optional [NOT] ATOMIC clause is not yet supported. This means that no transactional savepoint is set at the start of the instruction block and the BEGIN clause used in this context has no effect on the current transaction.

The DECLARE statement is used to define various items local to a routine:

The SIGNAL and RESIGNAL statements are not currently supported.

DECLARE is allowed only inside a BEGIN ... END compound statement and must be at its start, before any other statements.

Declarations must follow a certain order. Cursors must be declared before declaring handlers, and variables and conditions must be declared before declaring either cursors or handlers.

You may declare and use variables within a routine.

DECLARE var_name[,...] type [DEFAULT value]

SET var_name = expr [, var_name = expr] ...

SELECT col_name[,...] INTO var_name[,...] table_expr

SELECT id,data INTO x,y FROM test.t1 LIMIT 1;

CREATE PROCEDURE sp1 (x VARCHAR(5))
  BEGIN
    DECLARE xname VARCHAR(5) DEFAULT 'bob';
    DECLARE newname VARCHAR(5);
    DECLARE xid INT;
    
    SELECT xname,id INTO newname,xid 
      FROM table1 WHERE xname = xname;
    SELECT newname;
  END;

Certain conditions may require specific handling. These conditions can relate to errors, as well as to general flow control inside a routine.

DECLARE condition_name CONDITION FOR condition_value

condition_value:
    SQLSTATE [VALUE] sqlstate_value
  | mysql_error_code

DECLARE handler_type HANDLER FOR condition_value[,...] statement

handler_type:
    CONTINUE
  | EXIT
  | UNDO

condition_value:
    SQLSTATE [VALUE] sqlstate_value
  | condition_name
  | SQLWARNING
  | NOT FOUND
  | SQLEXCEPTION
  | mysql_error_code

mysql> CREATE TABLE test.t (s1 int,primary key (s1));
Query OK, 0 rows affected (0.00 sec)

mysql> delimiter //

mysql> CREATE PROCEDURE handlerdemo ()
    -> BEGIN
    ->   DECLARE CONTINUE HANDLER FOR SQLSTATE '23000' SET @x2 = 1;
    ->   SET @x = 1;
    ->   INSERT INTO test.t VALUES (1);
    ->   SET @x = 2;
    ->   INSERT INTO test.t VALUES (1);
    ->   SET @x = 3;
    -> END;
    -> //
Query OK, 0 rows affected (0.00 sec)

mysql> CALL handlerdemo()//
Query OK, 0 rows affected (0.00 sec)

mysql> SELECT @x//
    +------+
    | @x   |
    +------+
    | 3    |
    +------+
    1 row in set (0.00 sec)

DECLARE CONTINUE HANDLER FOR SQLWARNING BEGIN END;

Cursors are supported inside stored procedures and functions and triggers. The syntax is as in embedded SQL. Cursors are currently asensitive, read-only, and non-scrolling. Asensitive means that the server may or may not make a copy of its result table.

Cursors must be declared before declaring handlers, and variables and conditions must be declared before declaring either cursors or handlers.

Example:

CREATE PROCEDURE curdemo()
BEGIN
  DECLARE done INT DEFAULT 0;
  DECLARE a CHAR(16);
  DECLARE b,c INT;
  DECLARE cur1 CURSOR FOR SELECT id,data FROM test.t1;
  DECLARE cur2 CURSOR FOR SELECT i FROM test.t2;
  DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;

  OPEN cur1;
  OPEN cur2;

  REPEAT
    FETCH cur1 INTO a, b;
    FETCH cur2 INTO c;
    IF NOT done THEN
       IF b < c THEN
          INSERT INTO test.t3 VALUES (a,b);
       ELSE
          INSERT INTO test.t3 VALUES (a,c);
       END IF;
    END IF;
  UNTIL done END REPEAT;

  CLOSE cur1;
  CLOSE cur2;
END

DECLARE cursor_name CURSOR FOR select_statement

OPEN cursor_name

FETCH cursor_name INTO var_name [, var_name] ...

CLOSE cursor_name

The IF, CASE, LOOP, WHILE, REPLACE ITERATE, and LEAVE constructs are fully implemented.

Many of these constructs contain other statements, as indicated by the grammar specifications in the following sections. Such constructs may be nested. For example, an IF statement might contain a WHILE loop, which itself contains a CASE statement.

FOR loops are not currently supported.

IF search_condition THEN statement_list
    [ELSEIF search_condition THEN statement_list] ...
    [ELSE statement_list]
END IF

CASE case_value
    WHEN when_value THEN statement_list
    [WHEN when_value THEN statement_list] ...
    [ELSE statement_list]
END CASE

CASE
    WHEN search_condition THEN statement_list
    [WHEN search_condition THEN statement_list] ...
    [ELSE statement_list]
END CASE

[begin_label:] LOOP
    statement_list
END LOOP [end_label]

LEAVE label

ITERATE label

CREATE PROCEDURE doiterate(p1 INT)
BEGIN
  label1: LOOP
    SET p1 = p1 + 1;
    IF p1 < 10 THEN ITERATE label1; END IF;
    LEAVE label1;
  END LOOP label1;
  SET @x = p1;
END

[begin_label:] REPEAT
    statement_list
UNTIL search_condition
END REPEAT [end_label]

mysql> delimiter //

mysql> CREATE PROCEDURE dorepeat(p1 INT)
    -> BEGIN
    ->   SET @x = 0;
    ->   REPEAT SET @x = @x + 1; UNTIL @x > p1 END REPEAT;
    -> END
    -> //
Query OK, 0 rows affected (0.00 sec)

mysql> CALL dorepeat(1000)//
Query OK, 0 rows affected (0.00 sec)

mysql> SELECT @x//
+------+
| @x   |
+------+
| 1001 |
+------+
1 row in set (0.00 sec)

[begin_label:] WHILE search_condition DO
    statement_list
END WHILE [end_label]

CREATE PROCEDURE dowhile()
BEGIN
  DECLARE v1 INT DEFAULT 5;

  WHILE v1 > 0 DO
    ...
    SET v1 = v1 - 1;
  END WHILE;
END