Chapter聽24.聽APIs and Libraries - MySQL 5.0参考手册英文版

my_ulonglong mysql_affected_rows(MYSQL *mysql)

Description

After executing a statement with mysql_query() or mysql_real_query(), returns the number of rows changed (for) UPDATE), deleted (for DELETE, or inserted (for INSERT. For SELECT statements, mysql_affected_rows() works like mysql_num_rows().

Return Values

An integer greater than zero indicates the number of rows affected or retrieved. Zero indicates that no records were updated for an UPDATE statement, no rows matched the WHERE clause in the query or that no query has yet been executed. -1 indicates that the query returned an error or that, for a SELECT query, mysql_affected_rows() was called prior to calling mysql_store_result(). Because mysql_affected_rows() returns an unsigned value, you can check for -1 by comparing the return value to (my_ulonglong)-1 (or to (my_ulonglong)~0, which is equivalent).

Errors

None.

Example

char *stmt = "UPDATE products SET cost=cost*1.25 WHERE group=10";
mysql_query(&mysql,stmt);
printf("%ld products updated",
       (long) mysql_affected_rows(&mysql));

For UPDATE statements, if you specify the CLIENT_FOUND_ROWS flag when connecting to mysqld, mysql_affected_rows() returns the number of rows matched by the WHERE clause. Otherwise, the default behavior is to return the number of rows actually changed.

Note that when you use a REPLACE command, mysql_affected_rows() returns 2 if the new row replaced an old row, because in this case, one row was inserted after the duplicate was deleted.

If you use INSERT ... ON DUPLICATE KEY UPDATE to insert a row, mysql_affected_rows() returns 1 if the row is inserted as a new row and 2 if an existing row is updated.

my_bool mysql_autocommit(MYSQL *mysql, my_bool mode)

Description

Sets autocommit mode on if mode is 1, off if mode is 0.

Return Values

Zero if successful. Non-zero if an error occurred.

Errors

None.

my_bool mysql_change_user(MYSQL *mysql, const char *user, const char *password, const char *db)

Description

Changes the user and causes the database specified by db to become the default (current) database on the connection specified by mysql. In subsequent queries, this database is the default for table references that do not include an explicit database specifier.

mysql_change_user() fails if the connected user cannot be authenticated or doesn't have permission to use the database. In this case, the user and database are not changed

The db parameter may be set to NULL if you don't want to have a default database.

This command resets the state as if one had done a new connect. (See Section聽24.2.13, 鈥淐ontrolling Automatic Reconnect Behavior鈥�.) It always performs a ROLLBACK of any active transactions, closes and drops all temporary tables, and unlocks all locked tables. Session system variables are reset to the values of the corresponding global system variables. Prepared statements are released and HANDLER variables are closed. Locks acquired with GET_LOCK() are released. These effects occur even if the user didn't change.

Return Values

Zero for success. Non-zero if an error occurred.

Errors

The same that you can get from mysql_real_connect().

Example

if (mysql_change_user(&mysql, "user", "password", "new_database"))
{
   fprintf(stderr, "Failed to change user.  Error: %s\n",
           mysql_error(&mysql));
}

const char *mysql_character_set_name(MYSQL *mysql)

Description

Returns the default character set for the current connection.

Return Values

The default character set

Errors

None.

void mysql_close(MYSQL *mysql)

Description

Closes a previously opened connection. mysql_close() also deallocates the connection handle pointed to by mysql if the handle was allocated automatically by mysql_init() or mysql_connect().

Return Values

None.

Errors

None.

my_bool mysql_commit(MYSQL *mysql)

Description

Commits the current transaction.

The action of this function is subject to the value of the completion_type system variable. In particular, if the value of completion_type is 2, the server performs a release after terminating a transaction and closes the client connection. The client program should call mysql_close() to close the connection from the client side.

Return Values

Zero if successful. Non-zero if an error occurred.

Errors

None.

MYSQL *mysql_connect(MYSQL *mysql, const char *host, const char *user, const char *passwd)

Description

This function is deprecated. It is preferable to use mysql_real_connect() instead.

mysql_connect() attempts to establish a connection to a MySQL database engine running on host. mysql_connect() must complete successfully before you can execute any of the other API functions, with the exception of mysql_get_client_info().

The meanings of the parameters are the same as for the corresponding parameters for mysql_real_connect() with the difference that the connection parameter may be NULL. In this case, the C API allocates memory for the connection structure automatically and frees it when you call mysql_close(). The disadvantage of this approach is that you can't retrieve an error message if the connection fails. (To get error information from mysql_errno() or mysql_error(), you must provide a valid MYSQL pointer.)

Return Values

Same as for mysql_real_connect().

Errors

Same as for mysql_real_connect().

int mysql_create_db(MYSQL *mysql, const char *db)

Description

Creates the database named by the db parameter.

This function is deprecated. It is preferable to use mysql_query() to issue an SQL CREATE DATABASE statement instead.

Return Values

Zero if the database was created successfully. Non-zero if an error occurred.

Errors

Example

if(mysql_create_db(&mysql, "my_database"))
{
   fprintf(stderr, "Failed to create new database.  Error: %s\n",
           mysql_error(&mysql));
}

void mysql_data_seek(MYSQL_RES *result, my_ulonglong offset)

Description

Seeks to an arbitrary row in a query result set. The offset value is a row number and should be in the range from 0 to mysql_num_rows(result)-1.

This function requires that the result set structure contains the entire result of the query, so mysql_data_seek() may be used only in conjunction with mysql_store_result(), not with mysql_use_result().

Return Values

None.

Errors

None.

void mysql_debug(const char *debug)

Description

Does a DBUG_PUSH with the given string. mysql_debug() uses the Fred Fish debug library. To use this function, you must compile the client library to support debugging. See MySQL Internals: Porting.

Return Values

None.

Errors

None.

Example

The call shown here causes the client library to generate a trace file in /tmp/client.trace on the client machine:

mysql_debug("d:t:O,/tmp/client.trace");

int mysql_drop_db(MYSQL *mysql, const char *db)

Description

Drops the database named by the db parameter.

This function is deprecated. It is preferable to use mysql_query() to issue an SQL DROP DATABASE statement instead.

Return Values

Zero if the database was dropped successfully. Non-zero if an error occurred.

Errors

Example

if(mysql_drop_db(&mysql, "my_database"))
  fprintf(stderr, "Failed to drop the database: Error: %s\n",
          mysql_error(&mysql));

int mysql_dump_debug_info(MYSQL *mysql)

Description

Instructs the server to write some debug information to the log. For this to work, the connected user must have the SUPER privilege.

Return Values

Zero if the command was successful. Non-zero if an error occurred.

Errors

my_bool mysql_eof(MYSQL_RES *result)

Description

This function is deprecated. mysql_errno() or mysql_error() may be used instead.

mysql_eof() determines whether the last row of a result set has been read.

If you acquire a result set from a successful call to mysql_store_result(), the client receives the entire set in one operation. In this case, a NULL return from mysql_fetch_row() always means the end of the result set has been reached and it is unnecessary to call mysql_eof(). When used with mysql_store_result(), mysql_eof() always returns true.

On the other hand, if you use mysql_use_result() to initiate a result set retrieval, the rows of the set are obtained from the server one by one as you call mysql_fetch_row() repeatedly. Because an error may occur on the connection during this process, a NULL return value from mysql_fetch_row() does not necessarily mean the end of the result set was reached normally. In this case, you can use mysql_eof() to determine what happened. mysql_eof() returns a non-zero value if the end of the result set was reached and zero if an error occurred.

Historically, mysql_eof() predates the standard MySQL error functions mysql_errno() and mysql_error(). Because those error functions provide the same information, their use is preferred over mysql_eof(), which is deprecated. (In fact, they provide more information, because mysql_eof() returns only a boolean value whereas the error functions indicate a reason for the error when one occurs.)

Return Values

Zero if no error occurred. Non-zero if the end of the result set has been reached.

Errors

None.

Example

The following example shows how you might use mysql_eof():

mysql_query(&mysql,"SELECT * FROM some_table");
result = mysql_use_result(&mysql);
while((row = mysql_fetch_row(result)))
{
    // do something with data
}
if(!mysql_eof(result))  // mysql_fetch_row() failed due to an error
{
    fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
}

However, you can achieve the same effect with the standard MySQL error functions:

mysql_query(&mysql,"SELECT * FROM some_table");
result = mysql_use_result(&mysql);
while((row = mysql_fetch_row(result)))
{
    // do something with data
}
if(mysql_errno(&mysql))  // mysql_fetch_row() failed due to an error
{
    fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
}

unsigned int mysql_errno(MYSQL *mysql)

Description

For the connection specified by mysql, mysql_errno() returns the error code for the most recently invoked API function that can succeed or fail. A return value of zero means that no error occurred. Client error message numbers are listed in the MySQL errmsg.h header file. Server error message numbers are listed in mysqld_error.h. Errors also are listed at Error Codes and Messages.

Note that some functions like mysql_fetch_row() don't set mysql_errno() if they succeed.

A rule of thumb is that all functions that have to ask the server for information reset mysql_errno() if they succeed.

MySQL-specific error numbers returned by mysql_errno() differ from SQLSTATE values returned by mysql_sqlstate(). For example, the mysql client program displays errors using the following format, where 1146 is the mysql_errno() value and '42S02' is the corresponding mysql_sqlstate() value:

shell> SELECT * FROM no_such_table;
ERROR 1146 (42S02): Table 'test.no_such_table' doesn't exist

Return Values

An error code value for the last mysql_xxx() call, if it failed. zero means no error occurred.

Errors

None.

const char *mysql_error(MYSQL *mysql)

Description

For the connection specified by mysql, mysql_error() returns a null-terminated string containing the error message for the most recently invoked API function that failed. If a function didn't fail, the return value of mysql_error() may be the previous error or an empty string to indicate no error.

A rule of thumb is that all functions that have to ask the server for information reset mysql_error() if they succeed.

For functions that reset mysql_errno(), the following two tests are equivalent:

if(*mysql_errno(&mysql))
{
  // an error occurred
}

if(mysql_error(&mysql)[0])
{
  // an error occurred
}

The language of the client error messages may be changed by recompiling the MySQL client library. Currently, you can choose error messages in several different languages. See Section聽5.10.2, 鈥淪etting the Error Message Language鈥�.

Return Values

A null-terminated character string that describes the error. An empty string if no error occurred.

Errors

None.

You should use mysql_real_escape_string() instead!

This function is identical to mysql_real_escape_string() except that mysql_real_escape_string() takes a connection handler as its first argument and escapes the string according to the current character set. mysql_escape_string() does not take a connection argument and does not respect the current character set.

MYSQL_FIELD *mysql_fetch_field(MYSQL_RES *result)

Description

Returns the definition of one column of a result set as a MYSQL_FIELD structure. Call this function repeatedly to retrieve information about all columns in the result set. mysql_fetch_field() returns NULL when no more fields are left.

mysql_fetch_field() is reset to return information about the first field each time you execute a new SELECT query. The field returned by mysql_fetch_field() is also affected by calls to mysql_field_seek().

If you've called mysql_query() to perform a SELECT on a table but have not called mysql_store_result(), MySQL returns the default blob length (8KB) if you call mysql_fetch_field() to ask for the length of a BLOB field. (The 8KB size is chosen because MySQL doesn't know the maximum length for the BLOB. This should be made configurable sometime.) Once you've retrieved the result set, field->max_length contains the length of the largest value for this column in the specific query.

Return Values

The MYSQL_FIELD structure for the current column. NULL if no columns are left.

Errors

None.

Example

MYSQL_FIELD *field;

while((field = mysql_fetch_field(result)))
{
    printf("field name %s\n", field->name);
}

MYSQL_FIELD *mysql_fetch_field_direct(MYSQL_RES *result, unsigned int fieldnr)

Description

Given a field number fieldnr for a column within a result set, returns that column's field definition as a MYSQL_FIELD structure. You may use this function to retrieve the definition for an arbitrary column. The value of fieldnr should be in the range from 0 to mysql_num_fields(result)-1.

Return Values

The MYSQL_FIELD structure for the specified column.

Errors

None.

Example

unsigned int num_fields;
unsigned int i;
MYSQL_FIELD *field;

num_fields = mysql_num_fields(result);
for(i = 0; i < num_fields; i++)
{
    field = mysql_fetch_field_direct(result, i);
    printf("Field %u is %s\n", i, field->name);
}

MYSQL_FIELD *mysql_fetch_fields(MYSQL_RES *result)

Description

Returns an array of all MYSQL_FIELD structures for a result set. Each structure provides the field definition for one column of the result set.

Return Values

An array of MYSQL_FIELD structures for all columns of a result set.

Errors

None.

Example

unsigned int num_fields;
unsigned int i;
MYSQL_FIELD *fields;

num_fields = mysql_num_fields(result);
fields = mysql_fetch_fields(result);
for(i = 0; i < num_fields; i++)
{
   printf("Field %u is %s\n", i, fields[i].name);
}

unsigned long *mysql_fetch_lengths(MYSQL_RES *result)

Description

Returns the lengths of the columns of the current row within a result set. If you plan to copy field values, this length information is also useful for optimization, because you can avoid calling strlen(). In addition, if the result set contains binary data, you must use this function to determine the size of the data, because strlen() returns incorrect results for any field containing null characters.

The length for empty columns and for columns containing NULL values is zero. To see how to distinguish these two cases, see the description for mysql_fetch_row().

Return Values

An array of unsigned long integers representing the size of each column (not including any terminating null characters). NULL if an error occurred.

Errors

mysql_fetch_lengths() is valid only for the current row of the result set. It returns NULL if you call it before calling mysql_fetch_row() or after retrieving all rows in the result.

Example

MYSQL_ROW row;
unsigned long *lengths;
unsigned int num_fields;
unsigned int i;

row = mysql_fetch_row(result);
if (row)
{
    num_fields = mysql_num_fields(result);
    lengths = mysql_fetch_lengths(result);
    for(i = 0; i < num_fields; i++)
    {
         printf("Column %u is %lu bytes in length.\n", 
                i, lengths[i]);
    }
}

MYSQL_ROW mysql_fetch_row(MYSQL_RES *result)

Description

Retrieves the next row of a result set. When used after mysql_store_result(), mysql_fetch_row() returns NULL when there are no more rows to retrieve. When used after mysql_use_result(), mysql_fetch_row() returns NULL when there are no more rows to retrieve or if an error occurred.

The number of values in the row is given by mysql_num_fields(result). If row holds the return value from a call to mysql_fetch_row(), pointers to the values are accessed as row[0] to row[mysql_num_fields(result)-1]. NULL values in the row are indicated by NULL pointers.

The lengths of the field values in the row may be obtained by calling mysql_fetch_lengths(). Empty fields and fields containing NULL both have length 0; you can distinguish these by checking the pointer for the field value. If the pointer is NULL, the field is NULL; otherwise, the field is empty.

Return Values

A MYSQL_ROW structure for the next row. NULL if there are no more rows to retrieve or if an error occurred.

Errors

Note that error is not reset between calls to mysql_fetch_row()

Example

MYSQL_ROW row;
unsigned int num_fields;
unsigned int i;

num_fields = mysql_num_fields(result);
while ((row = mysql_fetch_row(result)))
{
   unsigned long *lengths;
   lengths = mysql_fetch_lengths(result);
   for(i = 0; i < num_fields; i++)
   {
       printf("[%.*s] ", (int) lengths[i], 
              row[i] ? row[i] : "NULL");
   }
   printf("\n");
}

unsigned int mysql_field_count(MYSQL *mysql)

Description

Returns the number of columns for the most recent query on the connection.

The normal use of this function is when mysql_store_result() returned NULL (and thus you have no result set pointer). In this case, you can call mysql_field_count() to determine whether mysql_store_result() should have produced a non-empty result. This allows the client program to take proper action without knowing whether the query was a SELECT (or SELECT-like) statement. The example shown here illustrates how this may be done.

See Section聽24.2.14.1, 鈥淲hy mysql_store_result() Sometimes Returns NULL After mysql_query() Returns Success鈥�.

Return Values

An unsigned integer representing the number of columns in a result set.

Errors

None.

Example

MYSQL_RES *result;
unsigned int num_fields;
unsigned int num_rows;

if (mysql_query(&mysql,query_string))
{
    // error
}
else // query succeeded, process any data returned by it
{
    result = mysql_store_result(&mysql);
    if (result)  // there are rows
    {
        num_fields = mysql_num_fields(result);
        // retrieve rows, then call mysql_free_result(result)
    }
    else  // mysql_store_result() returned nothing; should it have?
    {
        if(mysql_field_count(&mysql) == 0)
        {
            // query does not return data
            // (it was not a SELECT)
            num_rows = mysql_affected_rows(&mysql);
        }
        else // mysql_store_result() should have returned data
        {
            fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
        }
    }
}

An alternative is to replace the mysql_field_count(&mysql) call with mysql_errno(&mysql). In this case, you are checking directly for an error from mysql_store_result() rather than inferring from the value of mysql_field_count() whether the statement was a SELECT.

MYSQL_FIELD_OFFSET mysql_field_seek(MYSQL_RES *result, MYSQL_FIELD_OFFSET offset)

Description

Sets the field cursor to the given offset. The next call to mysql_fetch_field() retrieves the field definition of the column associated with that offset.

To seek to the beginning of a row, pass an offset value of zero.

Return Values

The previous value of the field cursor.

Errors

None.

MYSQL_FIELD_OFFSET mysql_field_tell(MYSQL_RES *result)

Description

Returns the position of the field cursor used for the last mysql_fetch_field(). This value can be used as an argument to mysql_field_seek().

Return Values

The current offset of the field cursor.

Errors

None.

void mysql_free_result(MYSQL_RES *result)

Description

Frees the memory allocated for a result set by mysql_store_result(), mysql_use_result(), mysql_list_dbs(), and so forth. When you are done with a result set, you must free the memory it uses by calling mysql_free_result().

Do not attempt to access a result set after freeing it.

Return Values

None.

Errors

None.

void mysql_get_character_set_info(MYSQL *mysql, MY_CHARSET_INFO *cs)

Description

This function provides information about the default client character set. The default character set may be changed with the mysql_set_character_set() function.

Example

if (!mysql_set_character_set(&mysql, "utf8"))
{
    MY_CHARSET_INFO cs;
    mysql_get_character_set_info(&mysql, &cs);
    printf("character set information:\n");
    printf("character set name: %s\n", cs.name);
    printf("collation name: %s\n", cs.csname);
    printf("comment: %s\n", cs.comment);
    printf("directory: %s\n", cs.dir);
    printf("multi byte character min. length: %d\n", cs.mbminlen);
    printf("multi byte character max. length: %d\n", cs.mbmaxlen);
}

const char *mysql_get_client_info(void)

Description

Returns a string that represents the client library version.

Return Values

A character string that represents the MySQL client library version.

Errors

None.

unsigned long mysql_get_client_version(void)

Description

Returns an integer that represents the client library version. The value has the format XYYZZ where X is the major version, YY is the release level, and ZZ is the version number within the release level. For example, a value of 40102 represents a client library version of 4.1.2.

Return Values

An integer that represents the MySQL client library version.

Errors

None.

const char *mysql_get_host_info(MYSQL *mysql)

Description

Returns a string describing the type of connection in use, including the server hostname.

Return Values

A character string representing the server hostname and the connection type.

Errors

None.

unsigned int mysql_get_proto_info(MYSQL *mysql)

Description

Returns the protocol version used by current connection.

Return Values

An unsigned integer representing the protocol version used by the current connection.

Errors

None.

const char *mysql_get_server_info(MYSQL *mysql)

Description

Returns a string that represents the server version number.

Return Values

A character string that represents the server version number.

Errors

None.

unsigned long mysql_get_server_version(MYSQL *mysql)

Description

Returns the version number of the server as an integer.

Return Values

A number that represents the MySQL server version in this format:

major_version*10000 + minor_version *100 + sub_version

For example, 5.1.5 is returned as 50105.

This function is useful in client programs for quickly determining whether some version-specific server capability exists.

Errors

None.

const char *mysql_get_ssl_cipher(MYSQL *mysql)

Description

mysql_get_ssl_cipher() returns the SSL cipher used for the given connection to the server. mysql is the connection handler returned from mysql_init().

This function was added in MySQL 5.1.9.

Return Values

A string naming the SSL cipher used for the connection, or NULL if no cipher is being used.

unsigned long mysql_hex_string(char *to, const char *from, unsigned long length)

Description

This function is used to create a legal SQL string that you can use in an SQL statement. See Section聽9.1.1, 鈥淪trings鈥�.

The string in from is encoded to hexadecimal format, with each character encoded as two hexadecimal digits. The result is placed in to and a terminating null byte is appended.

The string pointed to by from must be length bytes long. You must allocate the to buffer to be at least length*2+1 bytes long. When mysql_hex_string() returns, the contents of to is a null-terminated string. The return value is the length of the encoded string, not including the terminating null character.

The return value can be placed into an SQL statement using either 0xvalue or X'value' format. However, the return value does not include the 0x or X'...'. The caller must supply whichever of those is desired.

Example

char query[1000],*end;

end = strmov(query,"INSERT INTO test_table values(");
end = strmov(end,"0x");
end += mysql_hex_string(end,"What's this",11);
end = strmov(end,",0x");
end += mysql_hex_string(end,"binary data: \0\r\n",16);
*end++ = ')';

if (mysql_real_query(&mysql,query,(unsigned int) (end - query)))
{
   fprintf(stderr, "Failed to insert row, Error: %s\n",
           mysql_error(&mysql));
}

The strmov() function used in the example is included in the mysqlclient library and works like strcpy() but returns a pointer to the terminating null of the first parameter.

Return Values

The length of the value placed into to, not including the terminating null character.

Errors

None.

const char *mysql_info(MYSQL *mysql)

Description

Retrieves a string providing information about the most recently executed statement, but only for the statements listed here. For other statements, mysql_info() returns NULL. The format of the string varies depending on the type of statement, as described here. The numbers are illustrative only; the string contains values appropriate for the statement.

Note that mysql_info() returns a non-NULL value for INSERT ... VALUES only for the multiple-row form of the statement (that is, only if multiple value lists are specified).

Return Values

A character string representing additional information about the most recently executed statement. NULL if no information is available for the statement.

Errors

None.

MYSQL *mysql_init(MYSQL *mysql)

Description

Allocates or initializes a MYSQL object suitable for mysql_real_connect(). If mysql is a NULL pointer, the function allocates, initializes, and returns a new object. Otherwise, the object is initialized and the address of the object is returned. If mysql_init() allocates a new object, it is freed when mysql_close() is called to close the connection.

Return Values

An initialized MYSQL* handle. NULL if there was insufficient memory to allocate a new object.

Errors

In case of insufficient memory, NULL is returned.

my_ulonglong mysql_insert_id(MYSQL *mysql)

Description

Returns the value generated for an AUTO_INCREMENT column by the previous INSERT statement. Use this function after you have performed an INSERT statement into a table that contains an AUTO_INCREMENT field.

The return value of mysql_insert_id() is always zero unless explicitly updated under one of the following conditions:

For 5.1.12 and later, the return value of mysql_insert_id() can be simplified to the following sequence:

The value of mysql_insert_id() is affected only by statements issued within the current client connection. It is not affected by statements issued by other clients.

See Section聽12.11.3, 鈥淚nformation Functions鈥�.

Also note that the value of the SQL LAST_INSERT_ID() function will contain the value of the first automatically generated value that was successfully inserted (starting from 5.1.12) or the first automatically generated value if any rows were successfully inserted (before 5.1.12). Another difference is that LAST_INSERT_ID() is not updated if you set an AUTO_INCREMENT column to a specific non-special value.

The reason for the difference between LAST_INSERT_ID() and mysql_insert_id() is that LAST_INSERT_ID() is made easy to use in scripts while mysql_insert_id() tries to provide a little more exact information of what happens to the AUTO_INCREMENT column.

Return Values

Described in the preceding discussion.

Errors

None.

int mysql_kill(MYSQL *mysql, unsigned long pid)

Description

Asks the server to kill the thread specified by pid.

Return Values

Zero for success. Non-zero if an error occurred.

Errors

void mysql_library_end(void)

Description

This function finalizes the MySQL library. You should call it when you are done using the library (for example, after disconnecting from the server). The action taken by the call depends on whether your application is linked to the MySQL client library or the MySQL embedded server library. For a client program linked against the libmysqlclient library by using the -lmysqlclient flag, mysql_library_end() performs some memory management to clean up. For an embedded server application linked against the libmysqld library by using the -lmysqld flag, mysql_library_end() shuts down the embedded server and then cleans up.

See Section聽24.2.2, 鈥淐 API Function Overview鈥�, and Section聽24.2.3.40, 鈥�mysql_library_init()鈥�, for usage information.

int mysql_library_init(int argc, char **argv, char **groups)

Description

This function should be called to initialize the MySQL library before you call any other MySQL function. If your application uses the embedded server, this call starts the server and initializes any subsystems (mysys, InnoDB, and so forth) that the server uses.

In a non-multi-threaded environment, the call to mysql_library_init() may be omitted, because mysql_init() will invoke it automatically as necessary. However, mysql_library_init() is not thread-safe in a multi-threaded environment, and thus neither is mysql_init(), which calls mysql_library_init(). You must either call mysql_library_init() prior to spawning any threads, or else use a mutex to protect the call, whether you invoke mysql_library_init() or indirectly via mysql_init(). This should be done prior to any other client library call.

After your application is done using the MySQL library, call mysql_library_end() to clean up. See Section聽24.2.3.39, 鈥�mysql_library_end()鈥�.

The argc and argv arguments are analogous to the arguments to main(). The first element of argv is ignored (it typically contains the program name). For convenience, argc may be 0 (zero) if there are no command-line arguments for the server. mysql_library_init() makes a copy of the arguments so it's safe to destroy argv or groups after the call.

If you want to connect to an external server without starting the embedded server, you have to specify a negative value for argc.

The groups argument should be an array of strings that indicate the groups in option files from which options should be read. See Section聽4.3.2, 鈥淯sing Option Files鈥�. The final entry in the array should be NULL. For convenience, if the groups argument itself is NULL, the [server] and [embedded] groups are used by default.

See Section聽24.2.2, 鈥淐 API Function Overview鈥�, for additional usage information.

Example

#include <mysql.h>
#include <stdlib.h>

static char *server_args[] = {
  "this_program",       /* this string is not used */
  "--datadir=.",
  "--key_buffer_size=32M"
};
static char *server_groups[] = {
  "embedded",
  "server",
  "this_program_SERVER",
  (char *)NULL
};

int main(void) {
  if (mysql_library_init(sizeof(server_args) / sizeof(char *),
                        server_args, server_groups)) {
    fprintf(stderr, "could not initialize MySQL library\n");
    exit(1);
  }

  /* Use any MySQL API functions here */

  mysql_library_end();

  return EXIT_SUCCESS;
}

Return Values

Zero if successful. Non-zero if an error occurred.

MYSQL_RES *mysql_list_dbs(MYSQL *mysql, const char *wild)

Description

Returns a result set consisting of database names on the server that match the simple regular expression specified by the wild parameter. wild may contain the wildcard characters 鈥�%鈥� or 鈥�_鈥�, or may be a NULL pointer to match all databases. Calling mysql_list_dbs() is similar to executing the query SHOW databases [LIKE wild].

You must free the result set with mysql_free_result().

Return Values

A MYSQL_RES result set for success. NULL if an error occurred.

Errors

MYSQL_RES *mysql_list_fields(MYSQL *mysql, const char *table, const char *wild)

Description

Returns a result set consisting of field names in the given table that match the simple regular expression specified by the wild parameter. wild may contain the wildcard characters 鈥�%鈥� or 鈥�_鈥�, or may be a NULL pointer to match all fields. Calling mysql_list_fields() is similar to executing the query SHOW COLUMNS FROM tbl_name [LIKE wild].

Note that it's recommended that you use SHOW COLUMNS FROM tbl_name instead of mysql_list_fields().

You must free the result set with mysql_free_result().

Return Values

A MYSQL_RES result set for success. NULL if an error occurred.

Errors

MYSQL_RES *mysql_list_processes(MYSQL *mysql)

Description

Returns a result set describing the current server threads. This is the same kind of information as that reported by mysqladmin processlist or a SHOW PROCESSLIST query.

You must free the result set with mysql_free_result().

Return Values

A MYSQL_RES result set for success. NULL if an error occurred.

Errors

MYSQL_RES *mysql_list_tables(MYSQL *mysql, const char *wild)

Description

Returns a result set consisting of table names in the current database that match the simple regular expression specified by the wild parameter. wild may contain the wildcard characters 鈥�%鈥� or 鈥�_鈥�, or may be a NULL pointer to match all tables. Calling mysql_list_tables() is similar to executing the query SHOW tables [LIKE wild].

You must free the result set with mysql_free_result().

Return Values

A MYSQL_RES result set for success. NULL if an error occurred.

Errors

my_bool mysql_more_results(MYSQL *mysql)

Description

This function is used when you execute multiple statements specified as a single statement string, or when you execute CALL statements, which can return multiple result sets.

mysql_more_results() true if more results exist from the currently executed statement, in which case the application must call mysql_next_result() to fetch the results.

Return Values

TRUE (1) if more results exist. FALSE (0) if no more results exist.

In most cases, you can call mysql_next_result() instead to test whether more results exist and initiate retrieval if so.

See Section聽24.2.9, 鈥淐 API Handling of Multiple Statement Execution鈥�, and Section聽24.2.3.46, 鈥�mysql_next_result()鈥�.

Errors

None.

int mysql_next_result(MYSQL *mysql)

Description

This function is used when you execute multiple statements specified as a single statement string, or when you execute CALL statements, which can return multiple result sets.

If more statement results exist, mysql_next_result() reads the next statement result and returns the status back to the application.

Before calling mysql_next_result(), you must call mysql_free_result() for the preceding statement if it is a query that returned a result set.

After calling mysql_next_result() the state of the connection is as if you had called mysql_real_query() or mysql_query() for the next statement. This means that you can call mysql_store_result(), mysql_warning_count(), mysql_affected_rows(), and so forth.

If mysql_next_result() returns an error, no other statements are executed and there are no more results to fetch.

If your program executes stored procedures with the CALL SQL statement, you must set the CLIENT_MULTI_RESULTS flag explicitly, or implicitly by setting CLIENT_MULTI_STATEMENTS when you call mysql_real_connect(). This is because each CALL returns a result to indicate the call status, in addition to any results sets that might be returned by statements executed within the procedure. In addition, because CALL can return multiple results, you should process those results using a loop that calls mysql_next_result() to determine whether there are more results.

For an example that shows how to use mysql_next_result(), see Section聽24.2.9, 鈥淐 API Handling of Multiple Statement Execution鈥�.

Return Values

Errors

unsigned int mysql_num_fields(MYSQL_RES *result)

To pass a MYSQL* argument instead, use unsigned int mysql_field_count(MYSQL *mysql).

Description

Returns the number of columns in a result set.

Note that you can get the number of columns either from a pointer to a result set or to a connection handle. You would use the connection handle if mysql_store_result() or mysql_use_result() returned NULL (and thus you have no result set pointer). In this case, you can call mysql_field_count() to determine whether mysql_store_result() should have produced a non-empty result. This allows the client program to take proper action without knowing whether the query was a SELECT (or SELECT-like) statement. The example shown here illustrates how this may be done.

See Section聽24.2.14.1, 鈥淲hy mysql_store_result() Sometimes Returns NULL After mysql_query() Returns Success鈥�.

Return Values

An unsigned integer representing the number of columns in a result set.

Errors

None.

Example

MYSQL_RES *result;
unsigned int num_fields;
unsigned int num_rows;

if (mysql_query(&mysql,query_string))
{
    // error
}
else // query succeeded, process any data returned by it
{
    result = mysql_store_result(&mysql);
    if (result)  // there are rows
    {
        num_fields = mysql_num_fields(result);
        // retrieve rows, then call mysql_free_result(result)
    }
    else  // mysql_store_result() returned nothing; should it have?
    {
        if (mysql_errno(&mysql))
        {
           fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
        }
        else if (mysql_field_count(&mysql) == 0)
        {
            // query does not return data
            // (it was not a SELECT)
            num_rows = mysql_affected_rows(&mysql);
        }
    }
}

An alternative (if you know that your query should have returned a result set) is to replace the mysql_errno(&mysql) call with a check whether mysql_field_count(&mysql) returns 0. This happens only if something went wrong.

my_ulonglong mysql_num_rows(MYSQL_RES *result)

Description

Returns the number of rows in the result set.

The use of mysql_num_rows() depends on whether you use mysql_store_result() or mysql_use_result() to return the result set. If you use mysql_store_result(), mysql_num_rows() may be called immediately. If you use mysql_use_result(), mysql_num_rows() does not return the correct value until all the rows in the result set have been retrieved.

mysql_num_rows() is intended for use with statements that return a result set, such as SELECT. For statements such as INSERT, UPDATE, or DELETE, the number of affected rows can be obtained with mysql_affected_rows().

Return Values

The number of rows in the result set.

Errors

None.

int mysql_options(MYSQL *mysql, enum mysql_option option, const void *arg)

Description

Can be used to set extra connect options and affect behavior for a connection. This function may be called multiple times to set several options.

mysql_options() should be called after mysql_init() and before mysql_connect() or mysql_real_connect().

The option argument is the option that you want to set; the arg argument is the value for the option. If the option is an integer, arg should point to the value of the integer.

The following list describes the possible options, their effect, and how arg is used for each option. Several of the options apply only when the application is linked against the libmysqld embedded server library and are unused for applications linked against the libmysql client library. For option descriptions that indicate arg is unused, its value is irrelevant; it is conventional to pass 0.

Note that the client group is always read if you use MYSQL_READ_DEFAULT_FILE or MYSQL_READ_DEFAULT_GROUP.

The specified group in the option file may contain the following options:

Note that timeout has been replaced by connect-timeout, but timeout is still supported in MySQL 5.1 for backward compatibility.

For more information about option files, see Section聽4.3.2, 鈥淯sing Option Files鈥�.

Before MySQL 5.1.18, the arg argument was declared as char *.

Return Values

Zero for success. Non-zero if you specify an unknown option.

Example

MYSQL mysql;

mysql_init(&mysql);
mysql_options(&mysql,MYSQL_OPT_COMPRESS,0);
mysql_options(&mysql,MYSQL_READ_DEFAULT_GROUP,"odbc");
if (!mysql_real_connect(&mysql,"host","user","passwd","database",0,NULL,0))
{
    fprintf(stderr, "Failed to connect to database: Error: %s\n",
          mysql_error(&mysql));
}

This code requests that the client use the compressed client/server protocol and read the additional options from the odbc section in the my.cnf file.

int mysql_ping(MYSQL *mysql)

Description

Checks whether the connection to the server is working. If the connection has gone down, an attempt to reconnect is made unless auto-reconnect is disabled.

This function can be used by clients that remain idle for a long while, to check whether the server has closed the connection and reconnect if necessary.

Return Values

Zero if the connection to the server is alive. Non-zero if an error occurred. A non-zero return does not indicate whether the MySQL server itself is down; the connection might be broken for other reasons such as network problems.

Errors

int mysql_query(MYSQL *mysql, const char *stmt_str)

Description

Executes the SQL statement pointed to by the null-terminated string stmt_str. Normally, the string must consist of a single SQL statement and you should not add a terminating semicolon (鈥�;鈥�) or \g to the statement. If multiple-statement execution has been enabled, the string can contain several statements separated by semicolons. See Section聽24.2.9, 鈥淐 API Handling of Multiple Statement Execution鈥�.

mysql_query() cannot be used for statements that contain binary data; you must use mysql_real_query() instead. (Binary data may contain the 鈥�\0鈥� character, which mysql_query() interprets as the end of the statement string.)

If you want to know whether the statement should return a result set, you can use mysql_field_count() to check for this. See Section聽24.2.3.22, 鈥�mysql_field_count()鈥�.

Return Values

Zero if the statement was successful. Non-zero if an error occurred.

Errors

MYSQL *mysql_real_connect(MYSQL *mysql, const char *host, const char *user, const char *passwd, const char *db, unsigned int port, const char *unix_socket, unsigned long client_flag)

Description

mysql_real_connect() attempts to establish a connection to a MySQL database engine running on host. mysql_real_connect() must complete successfully before you can execute any other API functions that require a valid MYSQL connection handle structure.

The parameters are specified as follows:

If your program uses the CALL SQL statement to execute stored procedures that produce result sets, you must set the CLIENT_MULTI_RESULTS flag, either explicitly, or implicitly by setting CLIENT_MULTI_STATEMENTS when you call mysql_real_connect(). This is because each such stored procedure produces multiple results: the result sets returned by statements executed within the procedure, as well as a result to indicate the call status.

If you enable CLIENT_MULTI_STATEMENTS or CLIENT_MULTI_RESULTS, you should process the result for every call to mysql_query() or mysql_real_query() by using a loop that calls mysql_next_result() to determine whether there are more results. For an example, see Section聽24.2.9, 鈥淐 API Handling of Multiple Statement Execution鈥�.

For some parameters, it is possible to have the value taken from an option file rather than from an explicit value in the mysql_real_connect() call. To do this, call mysql_options() with the MYSQL_READ_DEFAULT_FILE or MYSQL_READ_DEFAULT_GROUP option before calling mysql_real_connect(). Then, in the mysql_real_connect() call, specify the 鈥�no-value鈥� value for each parameter to be read from an option file:

If no value is found in an option file for a parameter, its default value is used as indicated in the descriptions given earlier in this section.

Return Values

A MYSQL* connection handle if the connection was successful, NULL if the connection was unsuccessful. For a successful connection, the return value is the same as the value of the first parameter.

Errors

Example

MYSQL mysql;

mysql_init(&mysql);
mysql_options(&mysql,MYSQL_READ_DEFAULT_GROUP,"your_prog_name");
if (!mysql_real_connect(&mysql,"host","user","passwd","database",0,NULL,0))
{
    fprintf(stderr, "Failed to connect to database: Error: %s\n",
          mysql_error(&mysql));
}

By using mysql_options() the MySQL library reads the [client] and [your_prog_name] sections in the my.cnf file which ensures that your program works, even if someone has set up MySQL in some non-standard way.

Note that upon connection, mysql_real_connect() sets the reconnect flag (part of the MYSQL structure) to a value of 1 in versions of the API older than 5.0.3, or 0 in newer versions. A value of 1 for this flag indicates that if a statement cannot be performed because of a lost connection, to try reconnecting to the server before giving up. You can use the MYSQL_OPT_RECONNECT option to mysql_options() to control reconnection behavior.

unsigned long mysql_real_escape_string(MYSQL *mysql, char *to, const char *from, unsigned long length)

Note that mysql must be a valid, open connection. This is needed because the escaping depends on the character set in use by the server.

Description

This function is used to create a legal SQL string that you can use in an SQL statement. See Section聽9.1.1, 鈥淪trings鈥�.

The string in from is encoded to an escaped SQL string, taking into account the current character set of the connection. The result is placed in to and a terminating null byte is appended. Characters encoded are NUL (ASCII 0), 鈥�\n鈥�, 鈥�\r鈥�, 鈥�\鈥�, 鈥�'鈥�, 鈥�"鈥�, and Control-Z (see Section聽9.1, 鈥淟iteral Values鈥�). (Strictly speaking, MySQL requires only that backslash and the quote character used to quote the string in the query be escaped. This function quotes the other characters to make them easier to read in log files.)

The string pointed to by from must be length bytes long. You must allocate the to buffer to be at least length*2+1 bytes long. (In the worst case, each character may need to be encoded as using two bytes, and you need room for the terminating null byte.) When mysql_real_escape_string() returns, the contents of to is a null-terminated string. The return value is the length of the encoded string, not including the terminating null character.

If you need to change the character set of the connection, you should use the mysql_set_character_set() function rather than executing a SET NAMES (or SET CHARACTER SET) statement. mysql_set_character_set() works like SET NAMES but also affects the character set used by mysql_real_escape_string(), which SET NAMES does not.

Example

char query[1000],*end;

end = strmov(query,"INSERT INTO test_table values(");
*end++ = '\'';
end += mysql_real_escape_string(&mysql, end,"What's this",11);
*end++ = '\'';
*end++ = ',';
*end++ = '\'';
end += mysql_real_escape_string(&mysql, end,"binary data: \0\r\n",16);
*end++ = '\'';
*end++ = ')';

if (mysql_real_query(&mysql,query,(unsigned int) (end - query)))
{
   fprintf(stderr, "Failed to insert row, Error: %s\n",
           mysql_error(&mysql));
}

The strmov() function used in the example is included in the mysqlclient library and works like strcpy() but returns a pointer to the terminating null of the first parameter.

Return Values

The length of the value placed into to, not including the terminating null character.

Errors

None.

int mysql_real_query(MYSQL *mysql, const char *stmt_str, unsigned long length)

Description

Executes the SQL statement pointed to by stmt_str, which should be a string length bytes long. Normally, the string must consist of a single SQL statement and you should not add a terminating semicolon (鈥�;鈥�) or \g to the statement. If multiple-statement execution has been enabled, the string can contain several statements separated by semicolons. See Section聽24.2.9, 鈥淐 API Handling of Multiple Statement Execution鈥�.

mysql_query() cannot be used for statements that contain binary data; you must use mysql_real_query() instead. (Binary data may contain the 鈥�\0鈥� character, which mysql_query() interprets as the end of the statement string.) In addition, mysql_real_query() is faster than mysql_query() because it does not call strlen() on the statement string.

If you want to know whether the statement should return a result set, you can use mysql_field_count() to check for this. See Section聽24.2.3.22, 鈥�mysql_field_count()鈥�.

Return Values

Zero if the statement was successful. Non-zero if an error occurred.

Errors

int mysql_refresh(MYSQL *mysql, unsigned int options)

Description

This functions flushes tables or caches, or resets replication server information. The connected user must have the RELOAD privilege.

The options argument is a bit mask composed from any combination of the following values. Multiple values can be OR'ed together to perform multiple operations with a single call.

Return Values

Zero for success. Non-zero if an error occurred.

Errors

int mysql_reload(MYSQL *mysql)

Description

Asks the MySQL server to reload the grant tables. The connected user must have the RELOAD privilege.

This function is deprecated. It is preferable to use mysql_query() to issue an SQL FLUSH PRIVILEGES statement instead.

Return Values

Zero for success. Non-zero if an error occurred.

Errors

my_bool mysql_rollback(MYSQL *mysql)

Description

Rolls back the current transaction.

The action of this function is subject to the value of the completion_type system variable. In particular, if the value of completion_type is 2, the server performs a release after terminating a transaction and closes the client connection. The client program should call mysql_close() to close the connection from the client side.

Return Values

Zero if successful. Non-zero if an error occurred.

Errors

None.

MYSQL_ROW_OFFSET mysql_row_seek(MYSQL_RES *result, MYSQL_ROW_OFFSET offset)

Description

Sets the row cursor to an arbitrary row in a query result set. The offset value is a row offset that should be a value returned from mysql_row_tell() or from mysql_row_seek(). This value is not a row number; if you want to seek to a row within a result set by number, use mysql_data_seek() instead.

This function requires that the result set structure contains the entire result of the query, so mysql_row_seek() may be used only in conjunction with mysql_store_result(), not with mysql_use_result().

Return Values

The previous value of the row cursor. This value may be passed to a subsequent call to mysql_row_seek().

Errors

None.

MYSQL_ROW_OFFSET mysql_row_tell(MYSQL_RES *result)

Description

Returns the current position of the row cursor for the last mysql_fetch_row(). This value can be used as an argument to mysql_row_seek().

You should use mysql_row_tell() only after mysql_store_result(), not after mysql_use_result().

Return Values

The current offset of the row cursor.

Errors

None.

int mysql_select_db(MYSQL *mysql, const char *db)

Description

Causes the database specified by db to become the default (current) database on the connection specified by mysql. In subsequent queries, this database is the default for table references that do not include an explicit database specifier.

mysql_select_db() fails unless the connected user can be authenticated as having permission to use the database.

Return Values

Zero for success. Non-zero if an error occurred.

Errors

int mysql_set_character_set(MYSQL *mysql, char *csname)

Description

This function is used to set the default character set for the current connection. The string csname specifies a valid character set name. The connection collation becomes the default collation of the character set. This function works like the SET NAMES statement, but also sets the value of mysql->charset, and thus affects the character set used by mysql_real_escape_string()

Return Values

Zero for success. Non-zero if an error occurred.

Example

MYSQL mysql;

mysql_init(&mysql);
if (!mysql_real_connect(&mysql,"host","user","passwd","database",0,NULL,0))
{
    fprintf(stderr, "Failed to connect to database: Error: %s\n",
          mysql_error(&mysql));
}

if (!mysql_set_character_set(&mysql, "utf8")) 
{
    printf("New client character set: %s\n", 
           mysql_character_set_name(&mysql));
}

void
mysql_set_local_infile_default(MYSQL *mysql);

Description

Sets the LOAD LOCAL DATA INFILE handler callback functions to the defaults used internally by the C client library. The library calls this function automatically if mysql_set_local_infile_handler() has not been called or does not supply valid functions for each of its callbacks.

The mysql_set_local_infile_default() function was added in MySQL 4.1.2.

Return Values

None.

Errors

None.

void
mysql_set_local_infile_handler(MYSQL *mysql,
      int (*local_infile_init)(void **, const char *, void *),
      int (*local_infile_read)(void *, char *, unsigned int),
      void (*local_infile_end)(void *),
      int (*local_infile_error)(void *, char*, unsigned int),
      void *userdata);

Description

This function installs callbacks to be used during the execution of LOAD DATA LOCAL INFILE statements. It enables application programs to exert control over local (client-side) data file reading. The arguments are the connection handler, a set of pointers to callback functions, and a pointer to a data area that the callbacks can use to share information.

To use mysql_set_local_infile_handler(), you must write the following callback functions:

int
local_infile_init(void **ptr, const char *filename, void *userdata);

The initialization function. This is called once to do any setup necessary, open the data file, allocate data structures, and so forth. The first void** argument is a pointer to a pointer. You can set the pointer (that is, *ptr) to a value that will be passed to each of the other callbacks (as a void*). The callbacks can use this pointed-to value to maintain state information. The userdata argument is the same value that is passed to mysql_set_local_infile_handler().

The initialization function should return zero for success, non-zero for an error.

int
local_infile_read(void *ptr, char *buf, unsigned int buf_len);

The data-reading function. This is called repeatedly to read the data file. buf points to the buffer where the read data should be stored, and buf_len is the maximum number of bytes that the callback can read and store in the buffer. (It can read fewer bytes, but should not read more.)

The return value is the number of bytes read, or zero when no more data could be read (this indicates EOF). Return a value less than zero if an error occurs.

void
local_infile_end(void *ptr)

The termination function. This is called once after local_infile_read() has returned zero (EOF) or an error. This function should deallocate any memory allocated by local_infile_init() and perform any other cleanup necessary. It is invoked even if the initalization function returns an error.

int
local_infile_error(void *ptr, 
                   char *error_msg, 
                   unsigned int error_msg_len);

The error-handling function. This is called to get a textual error message to return to the user in case any of your other functions returns an error. error_msg points to the buffer into which the message should be written, and error_msg_len is the length of the buffer. The message should be written as a null-terminated string, so the message can be at most error_msg_len鈥�1 bytes long.

The return value is the error number.

Typically, the other callbacks store the error message in the data structure pointed to by ptr, so that local_infile_error() can copy the message from there into error_msg.

After calling mysql_set_local_infile_handler() in your C code and passing pointers to your callback functions, you can then issue a LOAD DATA LOCAL INFILE statement (for example, by using mysql_query()). The client library automatically invokes your callbacks. The filename specified in LOAD DATA LOCAL INFILE will be passed as the second parameter to the local_infile_init() callback.

The mysql_set_local_infile_handler() function was added in MySQL 4.1.2.

Return Values

None.

Errors

None.

int mysql_set_server_option(MYSQL *mysql, enum enum_mysql_set_option option)

Description

Enables or disables an option for the connection. option can have one of the following values:

If you enable multiple-statement support, you should retrieve results from calls to mysql_query() or mysql_real_query() by using a loop that calls mysql_next_result() to determine whether there are more results. For an example, see Section聽24.2.9, 鈥淐 API Handling of Multiple Statement Execution鈥�.

Enabling multiple-statement support with MYSQL_OPTION_MULTI_STATEMENTS_ON does not have quite the same effect as enabling it by passing the CLIENT_MULTI_STATEMENTS flag to mysql_real_connect(): CLIENT_MULTI_STATEMENTS also enables CLIENT_MULTI_RESULTS. If you are using the CALL SQL statement in your programs, multiple-result support must be enabled; this means that MYSQL_OPTION_MULTI_STATEMENTS_ON by itself is insufficient to allow the use of CALL.

Return Values

Zero for success. Non-zero if an error occurred.

Errors

int mysql_shutdown(MYSQL *mysql, enum mysql_enum_shutdown_level shutdown_level)

Description

Asks the database server to shut down. The connected user must have SHUTDOWN privileges. MySQL 5.1 servers support only one type of shutdown; shutdown_level must be equal to SHUTDOWN_DEFAULT. Additional shutdown levels are planned to make it possible to choose the desired level. Dynamically linked executables which have been compiled with older versions of the libmysqlclient headers and call mysql_shutdown() need to be used with the old libmysqlclient dynamic library.

The shutdown process is described in Section聽5.2.7, 鈥淭he Shutdown Process鈥�.

Return Values

Zero for success. Non-zero if an error occurred.

Errors

const char *mysql_sqlstate(MYSQL *mysql)

Description

Returns a null-terminated string containing the SQLSTATE error code for the most recently executed SQL statement. The error code consists of five characters. '00000' means 鈥�no error鈥�. The values are specified by ANSI SQL and ODBC. For a list of possible values, see Error Codes and Messages.

SQLSTATE values returned by mysql_sqlstate() differ from MySQL-specific error numbers returned by mysql_errno(). For example, the mysql client program displays errors using the following format, where 1146 is the mysql_errno() value and '42S02' is the corresponding mysql_sqlstate() value:

shell> SELECT * FROM no_such_table;
ERROR 1146 (42S02): Table 'test.no_such_table' doesn't exist

Not all MySQL error numbers are mapped to SQLSTATE error codes. The value 'HY000' (general error) is used for unmapped error numbers.

If you call mysql_sqlstate() after mysql_real_connect() fails, mysql_sqlstate() might not return a useful value. For example, this happens if a host is blocked by the server and the connection is closed without any SQLSTATE value being sent to the client.

Return Values

A null-terminated character string containing the SQLSTATE error code.

See Also

See Section聽24.2.3.14, 鈥�mysql_errno()鈥�, Section聽24.2.3.15, 鈥�mysql_error()鈥�, and Section聽24.2.7.26, 鈥�mysql_stmt_sqlstate()鈥�.

int mysql_ssl_set(MYSQL *mysql, const char *key, const char *cert, const char *ca, const char *capath, const char *cipher)

Description

mysql_ssl_set() is used for establishing secure connections using SSL. It must be called before mysql_real_connect().

mysql_ssl_set() does nothing unless OpenSSL support is enabled in the client library.

mysql is the connection handler returned from mysql_init(). The other parameters are specified as follows:

Any unused SSL parameters may be given as NULL.

Return Values

This function always returns 0. If SSL setup is incorrect, mysql_real_connect() returns an error when you attempt to connect.

const char *mysql_stat(MYSQL *mysql)

Description

Returns a character string containing information similar to that provided by the mysqladmin status command. This includes uptime in seconds and the number of running threads, questions, reloads, and open tables.

Return Values

A character string describing the server status. NULL if an error occurred.

Errors

MYSQL_RES *mysql_store_result(MYSQL *mysql)

Description

After invoking mysql_query() or mysql_real_query(), you must call mysql_store_result() or mysql_use_result() for every statement that successfully retrieves data (SELECT, SHOW, DESCRIBE, EXPLAIN, CHECK TABLE, and so forth). You must also call mysql_free_result() after you are done with the result set.

You don't have to call mysql_store_result() or mysql_use_result() for other statements, but it does not do any harm or cause any notable performance degradation if you call mysql_store_result() in all cases. You can detect whether the statement has a result set by checking whether mysql_store_result() returns a non-zero value (more about this later on).

If you enable multiple-statement support, you should retrieve results from calls to mysql_query() or mysql_real_query() by using a loop that calls mysql_next_result() to determine whether there are more results. For an example, see Section聽24.2.9, 鈥淐 API Handling of Multiple Statement Execution鈥�.

If you want to know whether a statement should return a result set, you can use mysql_field_count() to check for this. See Section聽24.2.3.22, 鈥�mysql_field_count()鈥�.

mysql_store_result() reads the entire result of a query to the client, allocates a MYSQL_RES structure, and places the result into this structure.

mysql_store_result() returns a null pointer if the statement didn't return a result set (for example, if it was an INSERT statement).

mysql_store_result() also returns a null pointer if reading of the result set failed. You can check whether an error occurred by checking whether mysql_error() returns a non-empty string, mysql_errno() returns non-zero, or mysql_field_count() returns zero.

An empty result set is returned if there are no rows returned. (An empty result set differs from a null pointer as a return value.)

After you have called mysql_store_result() and gotten back a result that isn't a null pointer, you can call mysql_num_rows() to find out how many rows are in the result set.

You can call mysql_fetch_row() to fetch rows from the result set, or mysql_row_seek() and mysql_row_tell() to obtain or set the current row position within the result set.

See Section聽24.2.14.1, 鈥淲hy mysql_store_result() Sometimes Returns NULL After mysql_query() Returns Success鈥�.

Return Values

A MYSQL_RES result structure with the results. NULL (0) if an error occurred.

Errors

mysql_store_result() resets mysql_error() and mysql_errno() if it succeeds.

unsigned long mysql_thread_id(MYSQL *mysql)

Description

Returns the thread ID of the current connection. This value can be used as an argument to mysql_kill() to kill the thread.

If the connection is lost and you reconnect with mysql_ping(), the thread ID changes. This means you should not get the thread ID and store it for later. You should get it when you need it.

Return Values

The thread ID of the current connection.

Errors

None.

MYSQL_RES *mysql_use_result(MYSQL *mysql)

Description

You must call mysql_store_result() or mysql_use_result() for every query that successfully retrieves data (SELECT, SHOW, DESCRIBE, EXPLAIN).

mysql_use_result() initiates a result set retrieval but does not actually read the result set into the client like mysql_store_result() does. Instead, each row must be retrieved individually by making calls to mysql_fetch_row(). This reads the result of a query directly from the server without storing it in a temporary table or local buffer, which is somewhat faster and uses much less memory than mysql_store_result(). The client allocates memory only for the current row and a communication buffer that may grow up to max_allowed_packet bytes.

On the other hand, you shouldn't use mysql_use_result() if you are doing a lot of processing for each row on the client side, or if the output is sent to a screen on which the user may type a ^S (stop scroll). This ties up the server and prevent other threads from updating any tables from which the data is being fetched.

When using mysql_use_result(), you must execute mysql_fetch_row() until a NULL value is returned, otherwise, the unfetched rows are returned as part of the result set for your next query. The C API gives the error Commands out of sync; you can't run this command now if you forget to do this!

You may not use mysql_data_seek(), mysql_row_seek(), mysql_row_tell(), mysql_num_rows(), or mysql_affected_rows() with a result returned from mysql_use_result(), nor may you issue other queries until mysql_use_result() has finished. (However, after you have fetched all the rows, mysql_num_rows() accurately returns the number of rows fetched.)

You must call mysql_free_result() once you are done with the result set.

When using the libmysqld embedded server, the memory benefits are essentially lost because memory usage incrementally increases with each row retrieved until mysql_free_result() is called.

Return Values

A MYSQL_RES result structure. NULL if an error occurred.

Errors

mysql_use_result() resets mysql_error() and mysql_errno() if it succeeds.

unsigned int mysql_warning_count(MYSQL *mysql)

Description

Returns the number of warnings generated during execution of the previous SQL statement.

Return Values

The warning count.

Errors

None.

my_ulonglong mysql_stmt_affected_rows(MYSQL_STMT *stmt)

Description

Returns the total number of rows changed, deleted, or inserted by the last executed statement. May be called immediately after mysql_stmt_execute() for UPDATE, DELETE, or INSERT statements. For SELECT statements, mysql_stmt_affected_rows() works like mysql_num_rows().

Return Values

An integer greater than zero indicates the number of rows affected or retrieved. Zero indicates that no records were updated for an UPDATE statement, no rows matched the WHERE clause in the query, or that no query has yet been executed. -1 indicates that the query returned an error or that, for a SELECT query, mysql_stmt_affected_rows() was called prior to calling mysql_stmt_store_result(). Because mysql_stmt_affected_rows() returns an unsigned value, you can check for -1 by comparing the return value to (my_ulonglong)-1 (or to (my_ulonglong)~0, which is equivalent).

See Section聽24.2.3.1, 鈥�mysql_affected_rows()鈥�, for additional information on the return value.

Errors

None.

Example

For the usage of mysql_stmt_affected_rows(), refer to the Example from Section聽24.2.7.10, 鈥�mysql_stmt_execute()鈥�.

int mysql_stmt_attr_get(MYSQL_STMT *stmt, enum enum_stmt_attr_type option, void *arg)

Description

Can be used to get the current value for a statement attribute.

The option argument is the option that you want to get; the arg should point to a variable that should contain the option value. If the option is an integer, then arg should point to the value of the integer.

See Section聽24.2.7.3, 鈥�mysql_stmt_attr_set()鈥�, for a list of options and option types.

Note: In MySQL 5.1, mysql_stmt_attr_get() originally used unsigned int *, not my_bool *, for STMT_ATTR_UPDATE_MAX_LENGTH. This was corrected in MySQL 5.1.7.

Return Values

Zero if successful. Non-zero if option is unknown.

Errors

None.

int mysql_stmt_attr_set(MYSQL_STMT *stmt, enum enum_stmt_attr_type option, const void *arg)

Description

Can be used to affect behavior for a prepared statement. This function may be called multiple times to set several options.

The option argument is the option that you want to set; the arg argument is the value for the option. If the option is an integer, then arg should point to the value of the integer.

Possible option values:

If you use the STMT_ATTR_CURSOR_TYPE option with CURSOR_TYPE_READ_ONLY, a cursor is opened for the statement when you invoke mysql_stmt_execute(). If there is already an open cursor from a previous mysql_stmt_execute() call, it closes the cursor before opening a new one. mysql_stmt_reset() also closes any open cursor before preparing the statement for re-execution. mysql_stmt_free_result() closes any open cursor.

If you open a cursor for a prepared statement, mysql_stmt_store_result() is unnecessary, because that function causes the result set to be buffered on the client side.

Return Values

Zero if successful. Non-zero if option is unknown.

Errors

None.

Example

The following example opens a cursor for a prepared statement and sets the number of rows to fetch at a time to 5:

MYSQL_STMT *stmt;
int rc;
unsigned long type;
unsigned long prefetch_rows = 5;

stmt = mysql_stmt_init(mysql);
type = (unsigned long) CURSOR_TYPE_READ_ONLY;
rc = mysql_stmt_attr_set(stmt, STMT_ATTR_CURSOR_TYPE, (void*) &type);
/* ... check return value ... */
rc = mysql_stmt_attr_set(stmt, STMT_ATTR_PREFETCH_ROWS,
                         (void*) &prefetch_rows);
/* ... check return value ... */

my_bool mysql_stmt_bind_param(MYSQL_STMT *stmt, MYSQL_BIND *bind)

Description

mysql_stmt_bind_param() is used to bind input data for the parameter markers in the SQL statement that was passed to mysql_stmt_prepare(). It uses MYSQL_BIND structures to supply the data. bind is the address of an array of MYSQL_BIND structures. The client library expects the array to contain one element for each 鈥�?鈥� parameter marker that is present in the query.

Suppose that you prepare the following statement:

INSERT INTO mytbl VALUES(?,?,?)

When you bind the parameters, the array of MYSQL_BIND structures must contain three elements, and can be declared like this:

MYSQL_BIND bind[3];

Section聽24.2.5, 鈥淐 API Prepared Statement Data types鈥�, describes the members of each MYSQL_BIND element and how they should be set to provide input values.

Return Values

Zero if the bind operation was successful. Non-zero if an error occurred.

Errors

Example

For the usage of mysql_stmt_bind_param(), refer to the Example from Section聽24.2.7.10, 鈥�mysql_stmt_execute()鈥�.

my_bool mysql_stmt_bind_result(MYSQL_STMT *stmt, MYSQL_BIND *bind)

Description

mysql_stmt_bind_result() is used to associate (that is, bind) output columns in the result set to data buffers and length buffers. When mysql_stmt_fetch() is called to fetch data, the MySQL client/server protocol places the data for the bound columns into the specified buffers.

All columns must be bound to buffers prior to calling mysql_stmt_fetch(). bind is the address of an array of MYSQL_BIND structures. The client library expects the array to contain one element for each column of the result set. If you do not bind columns to MYSQL_BIND structures, mysql_stmt_fetch() simply ignores the data fetch. The buffers should be large enough to hold the data values, because the protocol doesn't return data values in chunks.

A column can be bound or rebound at any time, even after a result set has been partially retrieved. The new binding takes effect the next time mysql_stmt_fetch() is called. Suppose that an application binds the columns in a result set and calls mysql_stmt_fetch(). The client/server protocol returns data in the bound buffers. Then suppose that the application binds the columns to a different set of buffers. The protocol places data into the newly bound buffers when the next call to mysql_stmt_fetch() occurs.

To bind a column, an application calls mysql_stmt_bind_result() and passes the type, address, and length of the output buffer into which the value should be stored. Section聽24.2.5, 鈥淐 API Prepared Statement Data types鈥�, describes the members of each MYSQL_BIND element and how they should be set to receive output values.

Return Values

Zero if the bind operation was successful. Non-zero if an error occurred.

Errors

Example

For the usage of mysql_stmt_bind_result(), refer to the Example from Section聽24.2.7.11, 鈥�mysql_stmt_fetch()鈥�.

my_bool mysql_stmt_close(MYSQL_STMT *)

Description

Closes the prepared statement. mysql_stmt_close() also deallocates the statement handle pointed to by stmt.

If the current statement has pending or unread results, this function cancels them so that the next query can be executed.

Return Values

Zero if the statement was freed successfully. Non-zero if an error occurred.

Errors

Example

For the usage of mysql_stmt_close(), refer to the Example from Section聽24.2.7.10, 鈥�mysql_stmt_execute()鈥�.

void mysql_stmt_data_seek(MYSQL_STMT *stmt, my_ulonglong offset)

Description

Seeks to an arbitrary row in a statement result set. The offset value is a row number and should be in the range from 0 to mysql_stmt_num_rows(stmt)-1.

This function requires that the statement result set structure contains the entire result of the last executed query, so mysql_stmt_data_seek() may be used only in conjunction with mysql_stmt_store_result().

Return Values

None.

Errors

None.

unsigned int mysql_stmt_errno(MYSQL_STMT *stmt)

Description

For the statement specified by stmt, mysql_stmt_errno() returns the error code for the most recently invoked statement API function that can succeed or fail. A return value of zero means that no error occurred. Client error message numbers are listed in the MySQL errmsg.h header file. Server error message numbers are listed in mysqld_error.h. Errors also are listed at Error Codes and Messages.

Return Values

An error code value. Zero if no error occurred.

Errors

None.

const char *mysql_stmt_error(MYSQL_STMT *stmt)

Description

For the statement specified by stmt, mysql_stmt_error() returns a null-terminated string containing the error message for the most recently invoked statement API function that can succeed or fail. An empty string ("") is returned if no error occurred. This means the following two tests are equivalent:

if(*mysql_stmt_errno(stmt))
{
  // an error occurred
}

if (mysql_stmt_error(stmt)[0])
{
  // an error occurred
}

The language of the client error messages may be changed by recompiling the MySQL client library. Currently, you can choose error messages in several different languages.

Return Values

A character string that describes the error. An empty string if no error occurred.

Errors

None.

int mysql_stmt_execute(MYSQL_STMT *stmt)

Description

mysql_stmt_execute() executes the prepared query associated with the statement handle. The currently bound parameter marker values are sent to server during this call, and the server replaces the markers with this newly supplied data.

If the statement is an UPDATE, DELETE, or INSERT, the total number of changed, deleted, or inserted rows can be found by calling mysql_stmt_affected_rows(). If this is a statement such as SELECT that generates a result set, you must call mysql_stmt_fetch() to fetch the data prior to calling any other functions that result in query processing. For more information on how to fetch the results, refer to Section聽24.2.7.11, 鈥�mysql_stmt_fetch()鈥�.

For statements that generate a result set, you can request that mysql_stmt_execute() open a cursor for the statement by calling mysql_stmt_attr_set() before executing the statement. If you execute a statement multiple times, mysql_stmt_execute() closes any open cursor before opening a new one.

Return Values

Zero if execution was successful. Non-zero if an error occurred.

Errors

Example

The following example demonstrates how to create and populate a table using mysql_stmt_init(), mysql_stmt_prepare(), mysql_stmt_param_count(), mysql_stmt_bind_param(), mysql_stmt_execute(), and mysql_stmt_affected_rows(). The mysql variable is assumed to be a valid connection handle.

#define STRING_SIZE 50

#define DROP_SAMPLE_TABLE "DROP TABLE IF EXISTS test_table"
#define CREATE_SAMPLE_TABLE "CREATE TABLE test_table(col1 INT,\
                                                 col2 VARCHAR(40),\
                                                 col3 SMALLINT,\
                                                 col4 TIMESTAMP)"
#define INSERT_SAMPLE "INSERT INTO \ 
                       test_table(col1,col2,col3) \
                       VALUES(?,?,?)"

MYSQL_STMT    *stmt;
MYSQL_BIND    bind[3];
my_ulonglong  affected_rows;
int           param_count;
short         small_data;
int           int_data;
char          str_data[STRING_SIZE];
unsigned long str_length;
my_bool       is_null;

if (mysql_query(mysql, DROP_SAMPLE_TABLE))
{
  fprintf(stderr, " DROP TABLE failed\n");
  fprintf(stderr, " %s\n", mysql_error(mysql));
  exit(0);
}

if (mysql_query(mysql, CREATE_SAMPLE_TABLE))
{
  fprintf(stderr, " CREATE TABLE failed\n");
  fprintf(stderr, " %s\n", mysql_error(mysql));
  exit(0);
}

/* Prepare an INSERT query with 3 parameters */
/* (the TIMESTAMP column is not named; the server */
/*  sets it to the current date and time) */
stmt = mysql_stmt_init(mysql);
if (!stmt)
{
  fprintf(stderr, " mysql_stmt_init(), out of memory\n");
  exit(0);
}
if (mysql_stmt_prepare(stmt, INSERT_SAMPLE, strlen(INSERT_SAMPLE)))
{
  fprintf(stderr, " mysql_stmt_prepare(), INSERT failed\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}
fprintf(stdout, " prepare, INSERT successful\n");

/* Get the parameter count from the statement */
param_count= mysql_stmt_param_count(stmt);
fprintf(stdout, " total parameters in INSERT: %d\n", param_count);

if (param_count != 3) /* validate parameter count */
{
  fprintf(stderr, " invalid parameter count returned by MySQL\n");
  exit(0);
}

/* Bind the data for all 3 parameters */

memset(bind, 0, sizeof(bind));

/* INTEGER PARAM */
/* This is a number type, so there is no need 
   to specify buffer_length */
bind[0].buffer_type= MYSQL_TYPE_LONG;
bind[0].buffer= (char *)&int_data;
bind[0].is_null= 0;
bind[0].length= 0;

/* STRING PARAM */
bind[1].buffer_type= MYSQL_TYPE_STRING;
bind[1].buffer= (char *)str_data;
bind[1].buffer_length= STRING_SIZE;
bind[1].is_null= 0;
bind[1].length= &str_length;

/* SMALLINT PARAM */
bind[2].buffer_type= MYSQL_TYPE_SHORT;
bind[2].buffer= (char *)&small_data;
bind[2].is_null= &is_null;
bind[2].length= 0;

/* Bind the buffers */
if (mysql_stmt_bind_param(stmt, bind))
{
  fprintf(stderr, " mysql_stmt_bind_param() failed\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

/* Specify the data values for the first row */
int_data= 10;             /* integer */
strncpy(str_data, "MySQL", STRING_SIZE); /* string  */
str_length= strlen(str_data);

/* INSERT SMALLINT data as NULL */
is_null= 1;

/* Execute the INSERT statement - 1*/
if (mysql_stmt_execute(stmt))
{
  fprintf(stderr, " mysql_stmt_execute(), 1 failed\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

/* Get the total number of affected rows */
affected_rows= mysql_stmt_affected_rows(stmt);
fprintf(stdout, " total affected rows(insert 1): %lu\n",
                (unsigned long) affected_rows);

if (affected_rows != 1) /* validate affected rows */
{
  fprintf(stderr, " invalid affected rows by MySQL\n");
  exit(0);
}

/* Specify data values for second row, 
   then re-execute the statement */
int_data= 1000;
strncpy(str_data, "
        The most popular Open Source database", 
        STRING_SIZE);
str_length= strlen(str_data);
small_data= 1000;         /* smallint */
is_null= 0;               /* reset */

/* Execute the INSERT statement - 2*/
if (mysql_stmt_execute(stmt))
{
  fprintf(stderr, " mysql_stmt_execute, 2 failed\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

/* Get the total rows affected */
affected_rows= mysql_stmt_affected_rows(stmt);
fprintf(stdout, " total affected rows(insert 2): %lu\n",
                (unsigned long) affected_rows);

if (affected_rows != 1) /* validate affected rows */
{
  fprintf(stderr, " invalid affected rows by MySQL\n");
  exit(0);
}

/* Close the statement */
if (mysql_stmt_close(stmt))
{
  fprintf(stderr, " failed while closing the statement\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

Note: For complete examples on the use of prepared statement functions, refer to the file tests/mysql_client_test.c. This file can be obtained from a MySQL source distribution or from the BitKeeper source repository.

int mysql_stmt_fetch(MYSQL_STMT *stmt)

Description

mysql_stmt_fetch() returns the next row in the result set. It can be called only while the result set exists; that is, after a call to mysql_stmt_execute() that creates a result set or after mysql_stmt_store_result(), which is called after mysql_stmt_execute() to buffer the entire result set.

mysql_stmt_fetch() returns row data using the buffers bound by mysql_stmt_bind_result(). It returns the data in those buffers for all the columns in the current row set and the lengths are returned to the length pointer.

All columns must be bound by the application before calling mysql_stmt_fetch().

If a fetched data value is a NULL value, the *is_null value of the corresponding MYSQL_BIND structure contains TRUE (1). Otherwise, the data and its length are returned in the *buffer and *length elements based on the buffer type specified by the application. Each numeric and temporal type has a fixed length, as listed in the following table. The length of the string types depends on the length of the actual data value, as indicated by data_length.

Return Values

MYSQL_DATA_TRUNCATED is returned when truncation reporting is enabled. (Reporting is enabled by default, but can be controlled with mysql_options().) To determine which parameters were truncated when this value is returned, check the error members of the MYSQL_BIND parameter structures.

Errors

Example

The following example demonstrates how to fetch data from a table using mysql_stmt_result_metadata(), mysql_stmt_bind_result(), and mysql_stmt_fetch(). (This example expects to retrieve the two rows inserted by the example shown in Section聽24.2.7.10, 鈥�mysql_stmt_execute()鈥�.) The mysql variable is assumed to be a valid connection handle.

#define STRING_SIZE 50

#define SELECT_SAMPLE "SELECT col1, col2, col3, col4 \
                       FROM test_table"

MYSQL_STMT    *stmt;
MYSQL_BIND    bind[4];
MYSQL_RES     *prepare_meta_result;
MYSQL_TIME    ts;
unsigned long length[4];
int           param_count, column_count, row_count;
short         small_data;
int           int_data;
char          str_data[STRING_SIZE];
my_bool       is_null[4];
my_bool       error[4];

/* Prepare a SELECT query to fetch data from test_table */
stmt = mysql_stmt_init(mysql);
if (!stmt)
{
  fprintf(stderr, " mysql_stmt_init(), out of memory\n");
  exit(0);
}
if (mysql_stmt_prepare(stmt, SELECT_SAMPLE, strlen(SELECT_SAMPLE)))
{
  fprintf(stderr, " mysql_stmt_prepare(), SELECT failed\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}
fprintf(stdout, " prepare, SELECT successful\n");

/* Get the parameter count from the statement */
param_count= mysql_stmt_param_count(stmt);
fprintf(stdout, " total parameters in SELECT: %d\n", param_count);

if (param_count != 0) /* validate parameter count */
{
  fprintf(stderr, " invalid parameter count returned by MySQL\n");
  exit(0);
}

/* Fetch result set meta information */
prepare_meta_result = mysql_stmt_result_metadata(stmt);
if (!prepare_meta_result)
{
  fprintf(stderr,
         " mysql_stmt_result_metadata(), \ 
           returned no meta information\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

/* Get total columns in the query */
column_count= mysql_num_fields(prepare_meta_result);
fprintf(stdout, 
        " total columns in SELECT statement: %d\n", 
        column_count);

if (column_count != 4) /* validate column count */
{
  fprintf(stderr, " invalid column count returned by MySQL\n");
  exit(0);
}

/* Execute the SELECT query */
if (mysql_stmt_execute(stmt))
{
  fprintf(stderr, " mysql_stmt_execute(), failed\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

/* Bind the result buffers for all 4 columns before fetching them */

memset(bind, 0, sizeof(bind));

/* INTEGER COLUMN */
bind[0].buffer_type= MYSQL_TYPE_LONG;
bind[0].buffer= (char *)&int_data;
bind[0].is_null= &is_null[0];
bind[0].length= &length[0];
bind[0].error= &error[0];

/* STRING COLUMN */
bind[1].buffer_type= MYSQL_TYPE_STRING;
bind[1].buffer= (char *)str_data;
bind[1].buffer_length= STRING_SIZE;
bind[1].is_null= &is_null[1];
bind[1].length= &length[1];
bind[1].error= &error[1];

/* SMALLINT COLUMN */
bind[2].buffer_type= MYSQL_TYPE_SHORT;
bind[2].buffer= (char *)&small_data;
bind[2].is_null= &is_null[2];
bind[2].length= &length[2];
bind[2].error= &error[2];

/* TIMESTAMP COLUMN */
bind[3].buffer_type= MYSQL_TYPE_TIMESTAMP;
bind[3].buffer= (char *)&ts;
bind[3].is_null= &is_null[3];
bind[3].length= &length[3];
bind[3].error= &error[3];

/* Bind the result buffers */
if (mysql_stmt_bind_result(stmt, bind))
{
  fprintf(stderr, " mysql_stmt_bind_result() failed\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

/* Now buffer all results to client */
if (mysql_stmt_store_result(stmt))
{
  fprintf(stderr, " mysql_stmt_store_result() failed\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

/* Fetch all rows */
row_count= 0;
fprintf(stdout, "Fetching results ...\n");
while (!mysql_stmt_fetch(stmt))
{
  row_count++;
  fprintf(stdout, "  row %d\n", row_count);

  /* column 1 */
  fprintf(stdout, "   column1 (integer)  : ");
  if (is_null[0])
    fprintf(stdout, " NULL\n");
  else
    fprintf(stdout, " %d(%ld)\n", int_data, length[0]);

  /* column 2 */
  fprintf(stdout, "   column2 (string)   : ");
  if (is_null[1])
    fprintf(stdout, " NULL\n");
  else
    fprintf(stdout, " %s(%ld)\n", str_data, length[1]);

  /* column 3 */
  fprintf(stdout, "   column3 (smallint) : ");
  if (is_null[2])
    fprintf(stdout, " NULL\n");
  else
    fprintf(stdout, " %d(%ld)\n", small_data, length[2]);

  /* column 4 */
  fprintf(stdout, "   column4 (timestamp): ");
  if (is_null[3])
    fprintf(stdout, " NULL\n");
  else
    fprintf(stdout, " %04d-%02d-%02d %02d:%02d:%02d (%ld)\n",
                     ts.year, ts.month, ts.day,
                     ts.hour, ts.minute, ts.second,
                     length[3]);
  fprintf(stdout, "\n");
}

/* Validate rows fetched */
fprintf(stdout, " total rows fetched: %d\n", row_count);
if (row_count != 2)
{
  fprintf(stderr, " MySQL failed to return all rows\n");
  exit(0);
}

/* Free the prepared result metadata */
mysql_free_result(prepare_meta_result);


/* Close the statement */
if (mysql_stmt_close(stmt))
{
  fprintf(stderr, " failed while closing the statement\n");
  fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
  exit(0);
}

int mysql_stmt_fetch_column(MYSQL_STMT *stmt, MYSQL_BIND *bind, unsigned int column, unsigned long offset)

Description

Fetch one column from the current result set row. bind provides the buffer where data should be placed. It should be set up the same way as for mysql_stmt_bind_result(). column indicates which column to fetch. The first column is numbered 0. offset is the offset within the data value at which to begin retrieving data. This can be used for fetching the data value in pieces. The beginning of the value is offset 0.

Return Values

Zero if the value was fetched successfully. Non-zero if an error occurred.

Errors

unsigned int mysql_stmt_field_count(MYSQL_STMT *stmt)

Description

Returns the number of columns for the most recent statement for the statement handler. This value is zero for statements such as INSERT or DELETE that do not produce result sets.

mysql_stmt_field_count() can be called after you have prepared a statement by invoking mysql_stmt_prepare().

Return Values

An unsigned integer representing the number of columns in a result set.

Errors

None.

my_bool mysql_stmt_free_result(MYSQL_STMT *stmt)

Description

Releases memory associated with the result set produced by execution of the prepared statement. If there is a cursor open for the statement, mysql_stmt_free_result() closes it.

Return Values

Zero if the result set was freed successfully. Non-zero if an error occurred.

Errors

MYSQL_STMT *mysql_stmt_init(MYSQL *mysql)

Description

Create a MYSQL_STMT handle. The handle should be freed with mysql_stmt_close(MYSQL_STMT *).

Return values

A pointer to a MYSQL_STMT structure in case of success. NULL if out of memory.

Errors

my_ulonglong mysql_stmt_insert_id(MYSQL_STMT *stmt)

Description

Returns the value generated for an AUTO_INCREMENT column by the prepared INSERT or UPDATE statement. Use this function after you have executed a prepared INSERT statement on a table which contains an AUTO_INCREMENT field.

See Section聽24.2.3.37, 鈥�mysql_insert_id()鈥�, for more information.

Return Values

Value for AUTO_INCREMENT column which was automatically generated or explicitly set during execution of prepared statement, or value generated by LAST_INSERT_ID(expr) function. Return value is undefined if statement does not set AUTO_INCREMENT value.

Errors

None.

my_ulonglong mysql_stmt_num_rows(MYSQL_STMT *stmt)

Description

Returns the number of rows in the result set.

The use of mysql_stmt_num_rows() depends on whether you used mysql_stmt_store_result() to buffer the entire result set in the statement handle.

If you use mysql_stmt_store_result(), mysql_stmt_num_rows() may be called immediately.

mysql_stmt_num_rows() is intended for use with statements that return a result set, such as SELECT. For statements such as INSERT, UPDATE, or DELETE, the number of affected rows can be obtained with mysql_stmt_affected_rows().

Return Values

The number of rows in the result set.

Errors

None.

unsigned long mysql_stmt_param_count(MYSQL_STMT *stmt)

Description

Returns the number of parameter markers present in the prepared statement.

Return Values

An unsigned long integer representing the number of parameters in a statement.

Errors

None.

Example

For the usage of mysql_stmt_param_count(), refer to the Example from Section聽24.2.7.10, 鈥�mysql_stmt_execute()鈥�.

MYSQL_RES *mysql_stmt_param_metadata(MYSQL_STMT *stmt)

This function currently does nothing.

Description

Return Values

Errors

int mysql_stmt_prepare(MYSQL_STMT *stmt, const char *stmt_str, unsigned long length)

Description

Given the statement handle returned by mysql_stmt_init(), prepares the SQL statement pointed to by the string stmt_str and returns a status value. The string length should be given by the length argument. The string must consist of a single SQL statement. You should not add a terminating semicolon (鈥�;鈥�) or \g to the statement.

The application can include one or more parameter markers in the SQL statement by embedding question mark (鈥�?鈥�) characters into the SQL string at the appropriate positions.

The markers are legal only in certain places in SQL statements. For example, they are allowed in the VALUES() list of an INSERT statement (to specify column values for a row), or in a comparison with a column in a WHERE clause to specify a comparison value. However, they are not allowed for identifiers (such as table or column names), or to specify both operands of a binary operator such as the = equal sign. The latter restriction is necessary because it would be impossible to determine the parameter type. In general, parameters are legal only in Data Manipulation Language (DML) statements, and not in Data Definition Language (DDL) statements.

The parameter markers must be bound to application variables using mysql_stmt_bind_param() before executing the statement.

Return Values

Zero if the statement was prepared successfully. Non-zero if an error occurred.

Errors

If the prepare operation was unsuccessful (that is, mysql_stmt_prepare() returns non-zero), the error message can be obtained by calling mysql_stmt_error().

Example

For the usage of mysql_stmt_prepare(), refer to the Example from Section聽24.2.7.10, 鈥�mysql_stmt_execute()鈥�.

my_bool mysql_stmt_reset(MYSQL_STMT *stmt)

Description

Reset the prepared statement on the client and server to state after prepare. This is mainly used to reset data sent with mysql_stmt_send_long_data(). Any open cursor for the statement is closed.

To re-prepare the statement with another query, use mysql_stmt_prepare().

Return Values

Zero if the statement was reset successfully. Non-zero if an error occurred.

Errors

MYSQL_RES *mysql_stmt_result_metadata(MYSQL_STMT *stmt)

Description

If a statement passed to mysql_stmt_prepare() is one that produces a result set, mysql_stmt_result_metadata() returns the result set metadata in the form of a pointer to a MYSQL_RES structure that can be used to process the meta information such as total number of fields and individual field information. This result set pointer can be passed as an argument to any of the field-based API functions that process result set metadata, such as:

The result set structure should be freed when you are done with it, which you can do by passing it to mysql_free_result(). This is similar to the way you free a result set obtained from a call to mysql_store_result().

The result set returned by mysql_stmt_result_metadata() contains only metadata. It does not contain any row results. The rows are obtained by using the statement handle with mysql_stmt_fetch().

Return Values

A MYSQL_RES result structure. NULL if no meta information exists for the prepared query.

Errors

Example

For the usage of mysql_stmt_result_metadata(), refer to the Example from Section聽24.2.7.11, 鈥�mysql_stmt_fetch()鈥�.

MYSQL_ROW_OFFSET mysql_stmt_row_seek(MYSQL_STMT *stmt, MYSQL_ROW_OFFSET offset)

Description

Sets the row cursor to an arbitrary row in a statement result set. The offset value is a row offset that should be a value returned from mysql_stmt_row_tell() or from mysql_stmt_row_seek(). This value is not a row number; if you want to seek to a row within a result set by number, use mysql_stmt_data_seek() instead.

This function requires that the result set structure contains the entire result of the query, so mysql_stmt_row_seek() may be used only in conjunction with mysql_stmt_store_result().

Return Values

The previous value of the row cursor. This value may be passed to a subsequent call to mysql_stmt_row_seek().

Errors

None.

MYSQL_ROW_OFFSET mysql_stmt_row_tell(MYSQL_STMT *stmt)

Description

Returns the current position of the row cursor for the last mysql_stmt_fetch(). This value can be used as an argument to mysql_stmt_row_seek().

You should use mysql_stmt_row_tell() only after mysql_stmt_store_result().

Return Values

The current offset of the row cursor.

Errors

None.

my_bool mysql_stmt_send_long_data(MYSQL_STMT *stmt, unsigned int parameter_number, const char *data, unsigned long length)

Description

Allows an application to send parameter data to the server in pieces (or 鈥�chunks鈥�). Call this function after mysql_stmt_bind_param() and before mysql_stmt_execute(). It can be called multiple times to send the parts of a character or binary data value for a column, which must be one of the TEXT or BLOB data types.

parameter_number indicates which parameter to associate the data with. Parameters are numbered beginning with 0. data is a pointer to a buffer containing data to be sent, and length indicates the number of bytes in the buffer.

Note: The next mysql_stmt_execute() call ignores the bind buffer for all parameters that have been used with mysql_stmt_send_long_data() since last mysql_stmt_execute() or mysql_stmt_reset().

If you want to reset/forget the sent data, you can do it with mysql_stmt_reset(). See Section聽24.2.7.21, 鈥�mysql_stmt_reset()鈥�.

Return Values

Zero if the data is sent successfully to server. Non-zero if an error occurred.

Errors

Example

The following example demonstrates how to send the data for a TEXT column in chunks. It inserts the data value 'MySQL - The most popular Open Source database' into the text_column column. The mysql variable is assumed to be a valid connection handle.

#define INSERT_QUERY "INSERT INTO \
                      test_long_data(text_column) VALUES(?)"

MYSQL_BIND bind[1];
long       length;

stmt = mysql_stmt_init(mysql);
if (!stmt)
{
  fprintf(stderr, " mysql_stmt_init(), out of memory\n");
  exit(0);
}
if (mysql_stmt_prepare(stmt, INSERT_QUERY, strlen(INSERT_QUERY)))
{
  fprintf(stderr, "\n mysql_stmt_prepare(), INSERT failed");
  fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
  exit(0);
}
 memset(bind, 0, sizeof(bind));
 bind[0].buffer_type= MYSQL_TYPE_STRING;
 bind[0].length= &length;
 bind[0].is_null= 0;

/* Bind the buffers */
if (mysql_stmt_bind_param(stmt, bind))
{
  fprintf(stderr, "\n param bind failed");
  fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
  exit(0);
}

 /* Supply data in chunks to server */
 if (mysql_stmt_send_long_data(stmt,0,"MySQL",5))
{
  fprintf(stderr, "\n send_long_data failed");
  fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
  exit(0);
}

 /* Supply the next piece of data */
 if (mysql_stmt_send_long_data(stmt,0,
           " - The most popular Open Source database",40))
{
  fprintf(stderr, "\n send_long_data failed");
  fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
  exit(0);
}

 /* Now, execute the query */
 if (mysql_stmt_execute(stmt))
{
  fprintf(stderr, "\n mysql_stmt_execute failed");
  fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
  exit(0);
}

const char *mysql_stmt_sqlstate(MYSQL_STMT *stmt)

Description

For the statement specified by stmt, mysql_stmt_sqlstate() returns a null-terminated string containing the SQLSTATE error code for the most recently invoked prepared statement API function that can succeed or fail. The error code consists of five characters. "00000" means 鈥�no error.鈥� The values are specified by ANSI SQL and ODBC. For a list of possible values, see Error Codes and Messages.

Note that not all MySQL errors are yet mapped to SQLSTATE codes. The value "HY000" (general error) is used for unmapped errors.

Return Values

A null-terminated character string containing the SQLSTATE error code.

int mysql_stmt_store_result(MYSQL_STMT *stmt)

Description

You must call mysql_stmt_store_result() for every statement that successfully produces a result set (SELECT, SHOW, DESCRIBE, EXPLAIN), and only if you want to buffer the complete result set by the client, so that the subsequent mysql_stmt_fetch() call returns buffered data.

It is unnecessary to call mysql_stmt_store_result() for other statements, but if you do, it does not harm or cause any notable performance problem. You can detect whether the statement produced a result set by checking if mysql_stmt_result_metadata() returns NULL. For more information, refer to Section聽24.2.7.22, 鈥�mysql_stmt_result_metadata()鈥�.

Note: MySQL doesn't by default calculate MYSQL_FIELD->max_length for all columns in mysql_stmt_store_result() because calculating this would slow down mysql_stmt_store_result() considerably and most applications doesn't need max_length. If you want max_length to be updated, you can call mysql_stmt_attr_set(MYSQL_STMT, STMT_ATTR_UPDATE_MAX_LENGTH, &flag) to enable this. See Section聽24.2.7.3, 鈥�mysql_stmt_attr_set()鈥�.

Return Values

Zero if the results are buffered successfully. Non-zero if an error occurred.

Errors

void my_init(void)

Description

my_init() initializes some global variables that MySQL needs. If you are using a thread-safe client library, it also calls mysql_thread_init() for this thread.

It is necessary for my_init() to be called early in the initialization phase of a program's use of the MySQL library. However, my_init() is automatically called by mysql_init(), mysql_library_init(), mysql_server_init(), and mysql_connect(). If you ensure that your program invokes one of those functions before any other MySQL calls, there is no need to invoke my_init() explicitly.

To access my_init(), your program must include the my_sys.h header file:

#include <my_sys.h>

Return Values

None.

my_bool mysql_thread_init(void)

Description

This function must be called early within each created thread to initialize thread-specific variables. However, you may not necessarily need to invoke it explicitly: mysql_thread_init() is automatically called by my_init(), which itself is automatically called by mysql_init(), mysql_library_init(), mysql_server_init(), and mysql_connect(). If you invoke any of those functions, mysql_thread_init() will be called for you.

Return Values