|
||||||||||
PREV CLASS NEXT CLASS | FRAMES NO FRAMES | |||||||||
SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD |
java.lang.Object org.springframework.transaction.support.AbstractPlatformTransactionManager org.springframework.orm.hibernate.HibernateTransactionManager
public class HibernateTransactionManager
PlatformTransactionManager implementation for a single Hibernate SessionFactory. Binds a Hibernate Session from the specified factory to the thread, potentially allowing for one thread Session per factory. SessionFactoryUtils and HibernateTemplate are aware of thread-bound Sessions and participate in such transactions automatically. Using either of those is required for Hibernate access code that needs to support this transaction handling mechanism.
Supports custom isolation levels, and timeouts that get applied as appropriate
Hibernate query timeouts. To support the latter, application code must either use
HibernateTemplate
(which by default applies the timeouts) or call
SessionFactoryUtils.applyTransactionTimeout
for each created
Hibernate Query object.
This implementation is appropriate for applications that solely use Hibernate
for transactional data access, but it also supports direct data source access
within a transaction (i.e. plain JDBC code working with the same DataSource).
This allows for mixing services that access Hibernate (including transactional
caching) and services that use plain JDBC (without being aware of Hibernate)!
Application code needs to stick to the same simple Connection lookup pattern as
with DataSourceTransactionManager (i.e. DataSourceUtils.getConnection
or going through a TransactionAwareDataSourceProxy).
Note that to be able to register a DataSource's Connection for plain JDBC code, this instance needs to be aware of the DataSource (see setDataSource). The given DataSource should obviously match the one used by the given SessionFactory. To achieve this, configure both to the same JNDI DataSource, or preferably create the SessionFactory with LocalSessionFactoryBean and a local DataSource (which will be autodetected by this transaction manager).
JTA (usually through JtaTransactionManager) is necessary for accessing multiple transactional resources. The DataSource that Hibernate uses needs to be JTA-enabled then (see container setup), alternatively the Hibernate JCA connector can be used for direct container integration. Normally, JTA setup for Hibernate is somewhat container-specific due to the JTA TransactionManager lookup, required for proper transactional handling of the SessionFactory-level read-write cache.
Fortunately, there is an easier way with Spring: SessionFactoryUtils (and thus HibernateTemplate) registers synchronizations with TransactionSynchronizationManager (as used by JtaTransactionManager), for proper afterCompletion callbacks. Therefore, as long as Spring's JtaTransactionManager drives the JTA transactions, Hibernate does not require any special configuration for proper JTA participation. Note that there are special cases with EJB CMT and restrictive JTA subsystems: See JtaTransactionManager's javadoc for details.
On JDBC 3.0, this transaction manager supports nested transactions via JDBC 3.0 Savepoints. The "nestedTransactionAllowed" flag defaults to "false", though, as nested transactions will just apply to the JDBC Connection, not to the Hibernate Session and its cached objects. You can manually set the flag to "true" if you want to use nested transactions for JDBC access code that participates in Hibernate transactions (provided that your JDBC driver supports Savepoints). Note that Hibernate itself does not support nested transactions! Hence, do not expect Hibernate access code to participate in a nested transaction.
Note: Spring's Hibernate support in this package requires Hibernate 2.1.
Dedicated Hibernate3 support can be found in a separate package:
org.springframework.orm.hibernate3
.
setSessionFactory(net.sf.hibernate.SessionFactory)
,
setDataSource(javax.sql.DataSource)
,
LocalSessionFactoryBean
,
SessionFactoryUtils.getSession(net.sf.hibernate.SessionFactory, boolean)
,
SessionFactoryUtils.applyTransactionTimeout(net.sf.hibernate.Query, net.sf.hibernate.SessionFactory)
,
SessionFactoryUtils.releaseSession(net.sf.hibernate.Session, net.sf.hibernate.SessionFactory)
,
HibernateTemplate.execute(org.springframework.orm.hibernate.HibernateCallback)
,
DataSourceUtils.getConnection(javax.sql.DataSource)
,
DataSourceUtils.applyTransactionTimeout(java.sql.Statement, javax.sql.DataSource)
,
DataSourceUtils.releaseConnection(java.sql.Connection, javax.sql.DataSource)
,
JdbcTemplate
,
DataSourceTransactionManager
,
JtaTransactionManager
,
Serialized FormField Summary |
---|
Fields inherited from class org.springframework.transaction.support.AbstractPlatformTransactionManager |
---|
logger, SYNCHRONIZATION_ALWAYS, SYNCHRONIZATION_NEVER, SYNCHRONIZATION_ON_ACTUAL_TRANSACTION |
Constructor Summary | |
---|---|
HibernateTransactionManager()
Create a new HibernateTransactionManager instance. |
|
HibernateTransactionManager(net.sf.hibernate.SessionFactory sessionFactory)
Create a new HibernateTransactionManager instance. |
Method Summary | |
---|---|
void |
afterPropertiesSet()
Invoked by a BeanFactory after it has set all bean properties supplied (and satisfied BeanFactoryAware and ApplicationContextAware). |
protected DataAccessException |
convertHibernateAccessException(net.sf.hibernate.HibernateException ex)
Convert the given HibernateException to an appropriate exception from the org.springframework.dao hierarchy. |
protected DataAccessException |
convertJdbcAccessException(net.sf.hibernate.JDBCException ex)
Convert the given JDBCException to an appropriate exception from the org.springframework.dao hierarchy. |
protected void |
doBegin(Object transaction,
TransactionDefinition definition)
Begin a new transaction with semantics according to the given transaction definition. |
protected void |
doCleanupAfterCompletion(Object transaction)
Cleanup resources after transaction completion. |
protected void |
doCommit(DefaultTransactionStatus status)
Perform an actual commit of the given transaction. |
protected Object |
doGetTransaction()
Return a transaction object for the current transaction state. |
protected void |
doResume(Object transaction,
Object suspendedResources)
Resume the resources of the current transaction. |
protected void |
doRollback(DefaultTransactionStatus status)
Perform an actual rollback of the given transaction. |
protected void |
doSetRollbackOnly(DefaultTransactionStatus status)
Set the given transaction rollback-only. |
protected Object |
doSuspend(Object transaction)
Suspend the resources of the current transaction. |
DataSource |
getDataSource()
Return the JDBC DataSource that this instance manages transactions for. |
net.sf.hibernate.Interceptor |
getEntityInterceptor()
Return the current Hibernate entity interceptor, or null if none. |
SQLExceptionTranslator |
getJdbcExceptionTranslator()
Return the JDBC exception translator for this transaction manager. |
net.sf.hibernate.SessionFactory |
getSessionFactory()
Return the SessionFactory that this instance should manage transactions for. |
protected boolean |
isExistingTransaction(Object transaction)
Check if the given transaction object indicates an existing transaction (that is, a transaction which has already started). |
void |
setAutodetectDataSource(boolean autodetectDataSource)
Set whether to autodetect a JDBC DataSource used by the Hibernate SessionFactory, if set via LocalSessionFactoryBean's setDataSource . |
void |
setBeanFactory(BeanFactory beanFactory)
The bean factory just needs to be known for resolving entity interceptor bean names. |
void |
setDataSource(DataSource dataSource)
Set the JDBC DataSource that this instance should manage transactions for. |
void |
setEntityInterceptor(net.sf.hibernate.Interceptor entityInterceptor)
Set a Hibernate entity interceptor that allows to inspect and change property values before writing to and reading from the database. |
void |
setEntityInterceptorBeanName(String entityInterceptorBeanName)
Set the bean name of a Hibernate entity interceptor that allows to inspect and change property values before writing to and reading from the database. |
void |
setJdbcExceptionTranslator(SQLExceptionTranslator jdbcExceptionTranslator)
Set the JDBC exception translator for this transaction manager. |
void |
setSessionFactory(net.sf.hibernate.SessionFactory sessionFactory)
Set the SessionFactory that this instance should manage transactions for. |
Methods inherited from class java.lang.Object |
---|
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait |
Constructor Detail |
---|
public HibernateTransactionManager()
public HibernateTransactionManager(net.sf.hibernate.SessionFactory sessionFactory)
sessionFactory
- SessionFactory to manage transactions forMethod Detail |
---|
public void setSessionFactory(net.sf.hibernate.SessionFactory sessionFactory)
public net.sf.hibernate.SessionFactory getSessionFactory()
public void setDataSource(DataSource dataSource)
If the SessionFactory was configured with LocalDataSourceConnectionProvider, i.e. by Spring's LocalSessionFactoryBean with a specified "dataSource", the DataSource will be autodetected: You can still explictly specify the DataSource, but you don't need to in this case.
A transactional JDBC Connection for this DataSource will be provided to application code accessing this DataSource directly via DataSourceUtils or JdbcTemplate. The Connection will be taken from the Hibernate Session.
The DataSource specified here should be the target DataSource to manage transactions for, not a TransactionAwareDataSourceProxy. Only data access code may work with TransactionAwareDataSourceProxy, while the transaction manager needs to work on the underlying target DataSource. If there's nevertheless a TransactionAwareDataSourceProxy passed in, it will be unwrapped to extract its target DataSource.
public DataSource getDataSource()
public void setAutodetectDataSource(boolean autodetectDataSource)
setDataSource
. Default is "true".
Can be turned off to deliberately ignore an available DataSource, to not expose Hibernate transactions as JDBC transactions for that DataSource.
public void setEntityInterceptorBeanName(String entityInterceptorBeanName)
Requires the bean factory to be known, to be able to resolve the bean name to an interceptor instance on session creation. Typically used for prototype interceptors, i.e. a new interceptor instance per session.
Can also be used for shared interceptor instances, but it is recommended to set the interceptor reference directly in such a scenario.
entityInterceptorBeanName
- the name of the entity interceptor in
the bean factorysetBeanFactory(org.springframework.beans.factory.BeanFactory)
,
setEntityInterceptor(net.sf.hibernate.Interceptor)
public void setEntityInterceptor(net.sf.hibernate.Interceptor entityInterceptor)
Such an interceptor can either be set at the SessionFactory level, i.e. on LocalSessionFactoryBean, or at the Session level, i.e. on HibernateTemplate, HibernateInterceptor, and HibernateTransactionManager. It's preferable to set it on LocalSessionFactoryBean or HibernateTransactionManager to avoid repeated configuration and guarantee consistent behavior in transactions.
public net.sf.hibernate.Interceptor getEntityInterceptor() throws IllegalStateException, BeansException
null
if none.
Resolves an entity interceptor bean name via the bean factory,
if necessary.
IllegalStateException
- if bean name specified but no bean factory set
BeansException
- if bean name resolution via the bean factory failedsetEntityInterceptor(net.sf.hibernate.Interceptor)
,
setEntityInterceptorBeanName(java.lang.String)
,
setBeanFactory(org.springframework.beans.factory.BeanFactory)
public void setJdbcExceptionTranslator(SQLExceptionTranslator jdbcExceptionTranslator)
The default exception translator is either a SQLErrorCodeSQLExceptionTranslator if a DataSource is available, or a SQLStateSQLExceptionTranslator else.
jdbcExceptionTranslator
- the exception translatorSQLException
,
JDBCException
,
SessionFactoryUtils.newJdbcExceptionTranslator(net.sf.hibernate.SessionFactory)
,
SQLErrorCodeSQLExceptionTranslator
,
SQLStateSQLExceptionTranslator
public SQLExceptionTranslator getJdbcExceptionTranslator()
Creates a default SQLErrorCodeSQLExceptionTranslator or SQLStateSQLExceptionTranslator for the specified SessionFactory, if no exception translator explicitly specified.
public void setBeanFactory(BeanFactory beanFactory)
setBeanFactory
in interface BeanFactoryAware
beanFactory
- owning BeanFactory (never null
).
The bean can immediately call methods on the factory.setEntityInterceptorBeanName(java.lang.String)
public void afterPropertiesSet()
InitializingBean
This method allows the bean instance to perform initialization only possible when all bean properties have been set and to throw an exception in the event of misconfiguration.
afterPropertiesSet
in interface InitializingBean
protected Object doGetTransaction()
AbstractPlatformTransactionManager
The returned object will usually be specific to the concrete transaction manager implementation, carrying corresponding transaction state in a modifiable fashion. This object will be passed into the other template methods (e.g. doBegin and doCommit), either directly or as part of a DefaultTransactionStatus instance.
The returned object should contain information about any existing
transaction, that is, a transaction that has already started before the
current getTransaction
call on the transaction manager.
Consequently, a doGetTransaction
implementation will usually
look for an existing transaction and store corresponding state in the
returned transaction object.
doGetTransaction
in class AbstractPlatformTransactionManager
AbstractPlatformTransactionManager.doBegin(java.lang.Object, org.springframework.transaction.TransactionDefinition)
,
AbstractPlatformTransactionManager.doCommit(org.springframework.transaction.support.DefaultTransactionStatus)
,
AbstractPlatformTransactionManager.doRollback(org.springframework.transaction.support.DefaultTransactionStatus)
,
DefaultTransactionStatus.getTransaction()
protected boolean isExistingTransaction(Object transaction)
AbstractPlatformTransactionManager
The result will be evaluated according to the specified propagation behavior for the new transaction. An existing transaction might get suspended (in case of PROPAGATION_REQUIRES_NEW), or the new transaction might participate in the existing one (in case of PROPAGATION_REQUIRED).
The default implementation returns false
, assuming that
participating in existing transactions is generally not supported.
Subclasses are of course encouraged to provide such support.
isExistingTransaction
in class AbstractPlatformTransactionManager
transaction
- transaction object returned by doGetTransaction
AbstractPlatformTransactionManager.doGetTransaction()
protected void doBegin(Object transaction, TransactionDefinition definition)
AbstractPlatformTransactionManager
This method gets called when the transaction manager has decided to actually start a new transaction. Either there wasn't any transaction before, or the previous transaction has been suspended.
A special scenario is a nested transaction without savepoint: If
useSavepointForNestedTransaction()
returns "false", this method
will be called to start a nested transaction when necessary. In such a context,
there will be an active transaction: The implementation of this method has
to detect this and start an appropriate nested transaction.
doBegin
in class AbstractPlatformTransactionManager
transaction
- transaction object returned by doGetTransaction
definition
- TransactionDefinition instance, describing propagation
behavior, isolation level, read-only flag, timeout, and transaction nameprotected Object doSuspend(Object transaction)
AbstractPlatformTransactionManager
The default implementation throws a TransactionSuspensionNotSupportedException, assuming that transaction suspension is generally not supported.
doSuspend
in class AbstractPlatformTransactionManager
transaction
- transaction object returned by doGetTransaction
AbstractPlatformTransactionManager.doResume(java.lang.Object, java.lang.Object)
protected void doResume(Object transaction, Object suspendedResources)
AbstractPlatformTransactionManager
The default implementation throws a TransactionSuspensionNotSupportedException, assuming that transaction suspension is generally not supported.
doResume
in class AbstractPlatformTransactionManager
transaction
- transaction object returned by doGetTransaction
suspendedResources
- the object that holds suspended resources,
as returned by doSuspendAbstractPlatformTransactionManager.doSuspend(java.lang.Object)
protected void doCommit(DefaultTransactionStatus status)
AbstractPlatformTransactionManager
An implementation does not need to check the "new transaction" flag or the rollback-only flag; this will already have been handled before. Usually, a straight commit will be performed on the transaction object contained in the passed-in status.
doCommit
in class AbstractPlatformTransactionManager
status
- the status representation of the transactionDefaultTransactionStatus.getTransaction()
protected void doRollback(DefaultTransactionStatus status)
AbstractPlatformTransactionManager
An implementation does not need to check the "new transaction" flag; this will already have been handled before. Usually, a straight rollback will be performed on the transaction object contained in the passed-in status.
doRollback
in class AbstractPlatformTransactionManager
status
- the status representation of the transactionDefaultTransactionStatus.getTransaction()
protected void doSetRollbackOnly(DefaultTransactionStatus status)
AbstractPlatformTransactionManager
The default implementation throws an IllegalTransactionStateException, assuming that participating in existing transactions is generally not supported. Subclasses are of course encouraged to provide such support.
doSetRollbackOnly
in class AbstractPlatformTransactionManager
status
- the status representation of the transactionprotected void doCleanupAfterCompletion(Object transaction)
AbstractPlatformTransactionManager
Called after doCommit
and doRollback
execution,
on any outcome. The default implementation does nothing.
Should not throw any exceptions but just issue warnings on errors.
doCleanupAfterCompletion
in class AbstractPlatformTransactionManager
transaction
- transaction object returned by doGetTransactionprotected DataAccessException convertHibernateAccessException(net.sf.hibernate.HibernateException ex)
ex
- HibernateException that occured
convertJdbcAccessException(net.sf.hibernate.JDBCException)
protected DataAccessException convertJdbcAccessException(net.sf.hibernate.JDBCException ex)
org.springframework.dao
hierarchy.
Uses a JDBC exception translator. Can be overridden in subclasses.
ex
- JDBCException that occured, wrapping a SQLException
setJdbcExceptionTranslator(org.springframework.jdbc.support.SQLExceptionTranslator)
|
||||||||||
PREV CLASS NEXT CLASS | FRAMES NO FRAMES | |||||||||
SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD |