Chapter 4. Events, interceptors and exception handling - JBoss Seam 1.1.0 cr1 英文参考手册

The Seam component model was developed for use with event-driven applications, specifically to enable the development of fine-grained, loosely-coupled components in a fine-grained eventing model. Events in Seam come in several types, most of which we have already seen:

All of these various kinds of events are mapped to Seam components via JSF EL method binding expressions. For a JSF event, this is defined in the JSF template:

<h:commandButton value="Click me!" action="#{helloWorld.sayHello}"/>

For a jBPM transition event, it is specified in the jBPM process definition or pageflow definition:

<start-page name="hello" view-id="/hello.jsp">
    <transition to="hello">
        <action expression="#{helloWorld.sayHello}"/>
    </transition>
</start-page>

You can find out more information about JSF events and jBPM events elsewhere. Lets concentrate for now upon the two additional kinds of events defined by Seam.

<pages>
    <page view-id="/hello.jsp" action="#{helloWorld.sayHello}"/>
<pages>

<pages>
    <page view-id="/hello/*" action="#{helloWorld.sayHello}"/>
<pages>

TODO: translate struts action into page action

<pages>
    <page view-id="/hello.jsp" action="#{helloWorld.sayHello}">
        <param name="firstName" value="#{person.firstName}"/>
        <param name="lastName" value="#{person.lastName}"/>
    </page>
<pages>

<pages>
    <page view-id="/hello.jsp">
        <param name="firstName" value="#{person.firstName}"/>
        <param name="lastName" value="#{person.lastName}"/>
    </page>
<pages>

<pages>
    <page view-id="/calculator.jsp" action="#{calculator.calculate}">
        <param name="x" value="#{calculator.lhs}"/>
        <param name="y" value="#{calculator.rhs}"/>
        <param name="op" converterId="com.my.calculator.OperatorConverter"/>
    </page>
<pages>

<pages>
    <page view-id="/calculator.jsp" action="#{calculator.calculate}">
        <param name="x" value="#{calculator.lhs}"/>
        <param name="y" value="#{calculator.rhs}"/>
        <param name="op" converter="#{operatorConverter}"/>
    </page>
<pages>

<page action="#{calculator.calculate}">
    <param name="x" value="#{calculator.lhs}"/>
    <param name="y" value="#{calculator.rhs}"/>
    <param name="op" converter="#{operatorConverter}"/>
</page>

<events>
    <event type="hello">
        <action expression="#{helloListener.sayHelloBack}"/>
        <action expression="#{logger.logHello}"/>
    </event>
<events>

@Name("helloWorld")
public class HelloWorld {
    public void sayHello() {
        FacesMessages.instance().add("Hello World!");
        Events.instance().raiseEvent("hello");
    }
}

@Name("helloListener")
public class HelloListener {
    public void sayHelloBack() {
        FacesMessages.instance().add("Hello to you too!");
    }
}

@Name("helloListener")
public class HelloListener {
    @Observer("hello")
    public void sayHelloBack() {
        FacesMessages.instance().add("Hello to you too!");
    }
}

@Name("helloWorld")
public class HelloWorld {
    private String name;
    public void sayHello() {
        FacesMessages.instance().add("Hello World, my name is #0.", name);
        Events.instance().raiseEvent("hello", name);
    }
}

@Name("helloListener")
public class HelloListener {
    @Observer("hello")
    public void sayHelloBack(String name) {
        FacesMessages.instance().add("Hello #0!", name);
    }
}

EJB 3.0 introduced a standard interceptor model for session bean components. To add an interceptor to a bean, you need to write a class with a method annotated @AroundInvoke and annotate the bean with an @Interceptors annotation that specifies the name of the interceptor class. For example, the following interceptor checks that the user is logged in before allowing invoking an action listener method:

public class LoggedInInterceptor {

   @AroundInvoke
   public Object checkLoggedIn(InvocationContext invocation) throws Exception {
   
      boolean isLoggedIn = Contexts.getSessionContext().get("loggedIn")!=null;
      if (isLoggedIn) {
         //the user is already logged in
         return invocation.proceed();
      }
      else {
         //the user is not logged in, fwd to login page
         return "login";
      }
   }

}

To apply this interceptor to a session bean which acts as an action listener, we must annotate the session bean @Interceptors(LoggedInInterceptor.class). This is a somewhat ugly annotation. Seam builds upon the interceptor framework in EJB3 by allowing you to use @Interceptors as a meta-annotation. In our example, we would create an @LoggedIn annotation, as follows:

@Target(TYPE)
@Retention(RUNTIME)
@Interceptors(LoggedInInterceptor.class)
public @interface LoggedIn {}

We can now simply annotate our action listener bean with @LoggedIn to apply the interceptor.

@Stateless
@Name("changePasswordAction")
@LoggedIn
@Interceptors(SeamInterceptor.class)
public class ChangePasswordAction implements ChangePassword { 
    
    ...
    
    public String changePassword() { ... }
    
}

If interceptor ordering is important (it usually is), you can add @Interceptor annotations to your interceptor classes to specify a partial order of interceptors.

@Interceptor(around={BijectionInterceptor.class,
                     ValidationInterceptor.class,
                     ConversationInterceptor.class},
             within=RemoveInterceptor.class)
public class LoggedInInterceptor
{
    ...
}

You can even have a "client-side" interceptor, that runs around any of the built-in functionality of EJB3:

@Interceptor(type=CLIENT)
public class LoggedInInterceptor
{
    ...
}

EJB interceptors are stateful, with a lifecycle that is the same as the component they intercept. For interceptors which do not need to maintain state, Seam lets you get a performance optimization by specifying @Interceptor(stateless=true).

Much of the functionality of Seam is implemented as a set of built-in Seam interceptors, including the interceptors named in the previous example. You don't have to explicitly specify these interceptors by annotating your components; they exist for all interceptable Seam components.

You can even use Seam interceptors with JavaBean components, not just EJB3 beans!

EJB defines interception not only for business methods (using @AroundInvoke), but also for the lifecycle methods @PostConstruct, @PreDestroy, @PrePassivate and @PostActive. Seam supports all these lifecycle methods on both component and interceptor not only for EJB3 beans, but also for JavaBean components (except @PreDestroy which is not meaningful for JavaBean components).

JSF is surprisingly limited when it comes to exception handling. As a partial workaround for this problem, Seam lets you define how a particular class of exception is to be treated by annotating the exception class, or declaring the exception class in an XML file. This facility is meant to be combined with the EJB 3.0-standard @ApplicationException annotation which specifies whether the exception should cause a transaction rollback.

Note that Seam applies the EJB 3.0 exception rollback rules also to Seam JavaBean components: system exceptions always cause a transaction rollback, application exceptions do not cause a rollback by default, but do if @ApplicationException(rollback=true) is specified. (An application exception is any checked exception, or any unchecked exception annotated @ApplicationException. A system exception is any unchecked exception without an @ApplicationException annotation.)

This exception results in a HTTP 404 error whenever it propagates out of the Seam component layer. It does not roll back the current transaction.

@HttpError(errorCode=404)
public class ApplicationException extends Exception { ... }

This exception results in a browser redirect whenever it propagates out of the Seam component layer. It also ends the current conversation. It also rolls back the current transaction.

@Redirect(viewId="/failure.xhtml", end=true)
@ApplicationException(rollback=true)
public class UnrecoverableApplicationException extends RuntimeException { ... }

Note that @Redirect does not work for exceptions which occur during the render phase of the JSF lifecycle.

This exception results in immediate rendering of the view, along with a message to the user, when it propagates out of the Seam component layer. It also rolls back the current transaction.

@Render(viewId="/error.xhtml", message="Unexpected error")
public class SystemException extends RuntimeException { ... }

Note that @Render only works when the exception occurs during the INVOKE_APPLICATION phase.

Since we can't add annotations to all the exception classes we are interested in, Seam also lets us specify this functionality in WEB-INF/exceptions.xml.

<exceptions>
   
   <exception class="javax.persistence.EntityNotFoundException">
      <http-error error-code="404"/>
   </exception>
   
   <exception class="javax.persistence.PersistenceException">
      <render>Database access failed</render>
      <end-conversation/>
   </exception>
   
   <exception>
      <redirect view-id="/search.xhtml">Unexpected failure</redirect>
      <end-conversation/>
   </exception>
   
</exceptions>

The last <exception> declaration does not specify a class, and is a catch-all for any exception for which handling is not otherwise specified via annotations or in exceptions.xml.