站内搜索: 请输入搜索关键词
当前页面: 在线文档首页 > JDK 5 Documentation v6.0, Java 2 SDK 英文文档

Inflater (Java Platform SE 6) - JDK 5 Documentation v6.0, Java 2 SDK 英文文档


Java™ Platform
Standard Ed. 6

java.util.zip
Class Inflater

java.lang.Object
  extended by java.util.zip.Inflater

public class Inflater
extends Object

This class provides support for general purpose decompression using the popular ZLIB compression library. The ZLIB compression library was initially developed as part of the PNG graphics standard and is not protected by patents. It is fully described in the specifications at the java.util.zip package description.

The following code fragment demonstrates a trivial compression and decompression of a string using Deflater and Inflater.

 try {
     // Encode a String into bytes
     String inputString = "blahblahblah??";
     byte[] input = inputString.getBytes("UTF-8");

     // Compress the bytes
     byte[] output = new byte[100];
     Deflater compresser = new Deflater();
     compresser.setInput(input);
     compresser.finish();
     int compressedDataLength = compresser.deflate(output);

     // Decompress the bytes
     Inflater decompresser = new Inflater();
     decompresser.setInput(output, 0, compressedDataLength);
     byte[] result = new byte[100];
     int resultLength = decompresser.inflate(result);
     decompresser.end();

     // Decode the bytes into a String
     String outputString = new String(result, 0, resultLength, "UTF-8");
 } catch(java.io.UnsupportedEncodingException ex) {
     // handle
 } catch (java.util.zip.DataFormatException ex) {
     // handle
 }
 

See Also:
Deflater

Constructor Summary
Inflater()
          Creates a new decompressor.
Inflater(boolean nowrap)
          Creates a new decompressor.
 
Method Summary
 void end()
          Closes the decompressor and discards any unprocessed input.
protected  void finalize()
          Closes the decompressor when garbage is collected.
 boolean finished()
          Returns true if the end of the compressed data stream has been reached.
 int getAdler()
          Returns the ADLER-32 value of the uncompressed data.
 long getBytesRead()
          Returns the total number of compressed bytes input so far.
 long getBytesWritten()
          Returns the total number of uncompressed bytes output so far.
 int getRemaining()
          Returns the total number of bytes remaining in the input buffer.
 int getTotalIn()
          Returns the total number of compressed bytes input so far.
 int getTotalOut()
          Returns the total number of uncompressed bytes output so far.
 int inflate(byte[] b)
          Uncompresses bytes into specified buffer.
 int inflate(byte[] b, int off, int len)
          Uncompresses bytes into specified buffer.
 boolean needsDictionary()
          Returns true if a preset dictionary is needed for decompression.
 boolean needsInput()
          Returns true if no data remains in the input buffer.
 void reset()
          Resets inflater so that a new set of input data can be processed.
 void setDictionary(byte[] b)
          Sets the preset dictionary to the given array of bytes.
 void setDictionary(byte[] b, int off, int len)
          Sets the preset dictionary to the given array of bytes.
 void setInput(byte[] b)
          Sets input data for decompression.
 void setInput(byte[] b, int off, int len)
          Sets input data for decompression.
 
Methods inherited from class java.lang.Object
clone, equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Constructor Detail

Inflater

public Inflater(boolean nowrap)
Creates a new decompressor. If the parameter 'nowrap' is true then the ZLIB header and checksum fields will not be used. This provides compatibility with the compression format used by both GZIP and PKZIP.

Note: When using the 'nowrap' option it is also necessary to provide an extra "dummy" byte as input. This is required by the ZLIB native library in order to support certain optimizations.

Parameters:
nowrap - if true then support GZIP compatible compression

Inflater

public Inflater()
Creates a new decompressor.

Method Detail

setInput

public void setInput(byte[] b,
                     int off,
                     int len)
Sets input data for decompression. Should be called whenever needsInput() returns true indicating that more input data is required.

Parameters:
b - the input data bytes
off - the start offset of the input data
len - the length of the input data
See Also:
needsInput()

setInput

public void setInput(byte[] b)
Sets input data for decompression. Should be called whenever needsInput() returns true indicating that more input data is required.

Parameters:
b - the input data bytes
See Also:
needsInput()

setDictionary

public void setDictionary(byte[] b,
                          int off,
                          int len)
Sets the preset dictionary to the given array of bytes. Should be called when inflate() returns 0 and needsDictionary() returns true indicating that a preset dictionary is required. The method getAdler() can be used to get the Adler-32 value of the dictionary needed.

Parameters:
b - the dictionary data bytes
off - the start offset of the data
len - the length of the data
See Also:
needsDictionary(), getAdler()

setDictionary

public void setDictionary(byte[] b)
Sets the preset dictionary to the given array of bytes. Should be called when inflate() returns 0 and needsDictionary() returns true indicating that a preset dictionary is required. The method getAdler() can be used to get the Adler-32 value of the dictionary needed.

Parameters:
b - the dictionary data bytes
See Also:
needsDictionary(), getAdler()

getRemaining

public int getRemaining()
Returns the total number of bytes remaining in the input buffer. This can be used to find out what bytes still remain in the input buffer after decompression has finished.

Returns:
the total number of bytes remaining in the input buffer

needsInput

public boolean needsInput()
Returns true if no data remains in the input buffer. This can be used to determine if #setInput should be called in order to provide more input.

Returns:
true if no data remains in the input buffer

needsDictionary

public boolean needsDictionary()
Returns true if a preset dictionary is needed for decompression.

Returns:
true if a preset dictionary is needed for decompression
See Also:
setDictionary(byte[], int, int)

finished

public boolean finished()
Returns true if the end of the compressed data stream has been reached.

Returns:
true if the end of the compressed data stream has been reached

inflate

public int inflate(byte[] b,
                   int off,
                   int len)
            throws DataFormatException
Uncompresses bytes into specified buffer. Returns actual number of bytes uncompressed. A return value of 0 indicates that needsInput() or needsDictionary() should be called in order to determine if more input data or a preset dictionary is required. In the latter case, getAdler() can be used to get the Adler-32 value of the dictionary required.

Parameters:
b - the buffer for the uncompressed data
off - the start offset of the data
len - the maximum number of uncompressed bytes
Returns:
the actual number of uncompressed bytes
Throws:
DataFormatException - if the compressed data format is invalid
See Also:
needsInput(), needsDictionary()

inflate

public int inflate(byte[] b)
            throws DataFormatException
Uncompresses bytes into specified buffer. Returns actual number of bytes uncompressed. A return value of 0 indicates that needsInput() or needsDictionary() should be called in order to determine if more input data or a preset dictionary is required. In the latter case, getAdler() can be used to get the Adler-32 value of the dictionary required.

Parameters:
b - the buffer for the uncompressed data
Returns:
the actual number of uncompressed bytes
Throws:
DataFormatException - if the compressed data format is invalid
See Also:
needsInput(), needsDictionary()

getAdler

public int getAdler()
Returns the ADLER-32 value of the uncompressed data.

Returns:
the ADLER-32 value of the uncompressed data

getTotalIn

public int getTotalIn()
Returns the total number of compressed bytes input so far.

Since the number of bytes may be greater than Integer.MAX_VALUE, the getBytesRead() method is now the preferred means of obtaining this information.

Returns:
the total number of compressed bytes input so far

getBytesRead

public long getBytesRead()
Returns the total number of compressed bytes input so far.

Returns:
the total (non-negative) number of compressed bytes input so far
Since:
1.5

getTotalOut

public int getTotalOut()
Returns the total number of uncompressed bytes output so far.

Since the number of bytes may be greater than Integer.MAX_VALUE, the getBytesWritten() method is now the preferred means of obtaining this information.

Returns:
the total number of uncompressed bytes output so far

getBytesWritten

public long getBytesWritten()
Returns the total number of uncompressed bytes output so far.

Returns:
the total (non-negative) number of uncompressed bytes output so far
Since:
1.5

reset

public void reset()
Resets inflater so that a new set of input data can be processed.


end

public void end()
Closes the decompressor and discards any unprocessed input. This method should be called when the decompressor is no longer being used, but will also be called automatically by the finalize() method. Once this method is called, the behavior of the Inflater object is undefined.


finalize

protected void finalize()
Closes the decompressor when garbage is collected.

Overrides:
finalize in class Object

Java™ Platform
Standard Ed. 6

Submit a bug or feature
For further API reference and developer documentation, see Java SE Developer Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.

Copyright 2006 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.