Java 2D API: 2 - - JDK 5 Documentation v1.2.2, Java 2 SDK 英文文档

Java 2D^TM API

2.3 Setting Up the Graphics2D Context

To configure the Graphics2D context for rendering, you use the Graphics2D set methods to specify attributes such as the RenderingHints, Stroke, Paint, clipping path, Composite, and Tra nsform.

2.3.1 Setting Rendering Hints

A RenderingHints object encapsulates all of your preferences concerning how an object is rendered. To set the rendering hints in the Graphics2D context, you create a RenderingHints object and pass it into Graphics2D.s etRenderingHints.
Setting a rendering hint does not guarantee that a particular rendering algorithm will be used: not all platforms support modification of the rendering mode.
In the following example, antialiasing is enabled and the rendering preference is set to quality:

	qualityHints = new
               RenderingHints(RenderingHints.KEY_ANTIALIASING,
               RenderingHints.VALUE_ANTIALIAS_ON);
	qualityHints.put(RenderingHints.KEY_RENDERING,
               RenderingHints.VALUE_RENDER_QUALITY);
	g2.setRenderingHints(qualityHints);

2.3.2 Specifying Stroke Attributes

A BasicStroke defines the characteristics applied to a Shape's outline, including its width and dashing pattern, how line segments are joined together, and the decoration (if any) applied to the end of a line. To set the stroke a ttributes in the Graphics2D context, you create a BasicStroke object and pass it into setStroke.

2.3.2.1 Setting the Stroke Width

To set the stroke width, you create a BasicStroke object with the desired width and call setStroke.
In the following example, the stroke width is set to twelve points and the defaults are used for the join and endcap decorations:

	wideStroke = new BasicStroke(12.0f);
	g2.setStroke(wideStroke);

2.3.2.2 Specifying Join and Endcap Styles

To set the join and endcap styles, you create a BasicStroke object with the desired attributes.
In the following example, the stroke width is set to twelve points and the round join and endcap styles are used instead of the defaults:

	roundStroke = new BasicStroke(4.0f, BasicStroke.CAP_ROUND,
              BasicStroke.JOIN_ROUND);
	g2.setStroke(roundStroke);

2.3.2.3 Setting the Dashing Pattern

Complex dashing patterns can easily be defined with a BasicStroke object. When you create a BasicStroke object, you can specify two parameters that control the dashing pattern:

dash--an array that represents the dashing pattern. Alternating elements in the array represent the dash size and the size of the space between dashes. Element 0 represents the first dash, element 1 represents the first space.

dash_phase--an offset that defines where the dashing pattern starts.

In the following example, two different dashing patterns are applied to a line. In the first, the size of the dashes and the space between them is constant. The second dashing pattern is more complex, using a six-element array to define the dashing patter n.

	float dash1[] = {10.0f};
	BasicStroke bs = new BasicStroke(5.0f, BasicStroke.CAP_BUTT, 
                 BasicStroke.JOIN_MITER, 10.0f, dash1, 0.0f);
	g2.setStroke(bs);
	Line2D line = new Line2D.Float(20.0f, 10.0f, 100.0f, 10.0f);
	g2.draw(line);

	float[] dash2 = {6.0f, 4.0f, 2.0f, 4.0f, 2.0f, 4.0f};
	bs = new BasicStroke(5.0f, BasicStroke.CAP_BUTT, 
     	BasicStroke.JOIN_MITER, 10.0f, dash2, 0.0f);
	g2.setStroke(bs);
	g2.draw(line);

Both dashing patterns use a dash phase of zero, causing the dashes to be drawn starting at the beginning of the dashing pattern. The two dashing patterns are shown in Figure Figure 2-7.

Figure 2-7 Dashing Patterns

2.3.3 Specifying Fill Attributes

The Paint attribute in the Graphics2D context determines the fill color or pattern that is used when text and Shapes are rendered.

2.3.3.1 Filling a Shape with a Gradient

The GradientPaint class provides an easy way to fill a shape with a gradient of one color to another. When you create a GradientPaint, you specify a beginning position and color, and an ending position and color. The fill color chang es proportionally from one color to the other along the line connecting the two positions, as shown in Figure 2-8.

Figure 2-8 Creating Gradient Fills

In the third star in Figure 2-8, both points lie within the shape. All of the points along the gradient line extending beyond P1 take the beginning color, and the points along the gradient line extending beyond P2 take the ending color.
To fill a shape with a gradient of one color to another:

Create a GradientPaint object.

Call Graphics2D.setPaint.

Create the Shape.

Call Graphics2D.fill(shape).

In the following example, a rectangle is filled with a blue-green gradient.

	GradientPaint gp = new GradientPaint(50.0f, 50.0f, Color.blue,
                   50.0f, 250.0f, Color.green);
	g2.setPaint(gp);
	g2.fillRect(50, 50, 200, 200);

2.3.3.2 Filling a Shape with a Texture

The TexturePaint class provides an easy way to fill a shape with a repeating pattern. When you create a TexturePaint, you specify a BufferedImage to use as the pattern. You also pass the constructor a rectangle to define t he repetition frequency of the pattern, as shown in Figure 2-9.

Figure 2-9 Creating Texture Paints

To fill a shape with a texture:

Create a TexturePaint object.

Call Graphics2D.setPaint.

Create the Shape.

Call Graphics2D.fill(shape).

In the following example, a rectangle is filled with a simple texture created from a buffered image.

	// Create a buffered image texture patch of size 5x5
	BufferedImage bi = new BufferedImage(5, 5,   
                       BufferedImage.TYPE_INT_RGB);
	Graphics2D big = bi.createGraphics();

	// Render into the BufferedImage graphics to create the texture
	big.setColor(Color.green);
	big.fillRect(0,0,5,5);
	big.setColor(Color.lightGray);
	big.fillOval(0,0,5,5);

	// Create a texture paint from the buffered image
	Rectangle r = new Rectangle(0,0,5,5);
	TexturePaint tp = new 
		TexturePaint(bi,r,TexturePaint.NEAREST_NEIGHBOR);

	// Add the texture paint to the graphics context.
	g2.setPaint(tp);

	// Create and render a rectangle filled with the texture.
	g2.fillRect(0,0,200,200);

2.3.4 Setting the Clipping Path

To define a clipping path:

Create a Shape that represents the area you want to render.

Call Graphics2D.setClip to use the shape as the clipping path for the Graphics2D context.

To shrink the clipping path:

Create a Shape that intersects the current clipping path.

Call clip to change the clipping path to the intersection of the current clipping path and the new Shape.

In the following example, a clipping path is created from an ellipse and then modified by calling clip.

	public void paint(Graphics g) {
  		Graphics2D g2 = (Graphics2D) g;

		// The width and height of the canvas
  		int w = getSize().width;
  		int h = getSize().height;
  		// Create an ellipse and use it as the clipping path
  		Ellipse2D e = new Ellipse2D.Float(w/4.0f,h/4.0f,
                                    w/2.0f,h/2.0f);
  		g2.setClip(e);

 	 	// Fill the canvas. Only the area within the clip is rendered
  		g2.setColor(Color.cyan);
  		g2.fillRect(0,0,w,h);

  		// Change the clipping path, setting it to the intersection of 
  		// the current clip and a new rectangle.
  		Rectangle r = new Rectangle(w/4+10,h/4+10,w/2-20,h/2-20);
  		g2.clip(r);

  		// Fill the canvas. Only the area within the new clip 
  		// is rendered
  		g2.setColor(Color.magenta);
  		g2.fillRect(0,0,w,h);
	}

2.3.5 Setting the Graphics2D Transform

To transform a Shape, text string, or Image you add a new AffineTransform to the transformation pipeline in the Graphics2D context before rendering. The transformation is applied when the graphic object is rende red.
For example, to draw a rectangle that is rotated 45 degrees:

Get a rotation transform by calling AffineTransform. getRotateInstance.

Call Graphics2D.setTransform to add the new transform to the transformation pipeline.

Create a Rectangle2D.Float object.

Call Graphics2D.draw to render the rectangle.

In the following example, an instance of AffineTransform is used to rotate a rectangle 45 degrees when it is rendered.

	Rectangle2D rect = new Rectangle2D.Float(1.0,1.0,2.0,3.0);
	AffineTransform rotate45 =   
  		AffineTransform.getRotateInstance(Math.PI/4.0,0.0,0.0);
	g2.setTransform(rotate45);
	g2.draw(rect);

In this example, an AffineTransform is used to rotate a text string around a center point:

	// Define the rendering transform
	AffineTransform at = new AffineTransform();

	// Apply a translation transform to make room for the
	// rotated text.
	at.setToTranslation(400.0, 400.0);
	g2.transform(at);

	// Create a rotation transform to rotate the text
	at.setToRotation(Math.PI / 2.0);

	// Render four copies of the string "Java" at 90 degree angles
	for (int i = 0; i < 4; i++) {
    		g2.drawString("Java", 0.0f, 0.0f);
    		g2.transform(at);
	}

You can transform an image in the same way--the transform in the Graphics2D context is applied during rendering regardless of the type of graphic object being rendered.
To apply a transform to an image without changing the transform in the Graphics2D context, you can pass an AffineTransform to drawImage:

	AffineTransform rotate45 =   
  	AffineTransform.getRotateInstance(Math.PI/4.0,0.0,0.0)
	g2.drawImage(myImage, rotate45);

Transforms can also be applied to a Font to create a modified version of the Font, for more information see "Creating Font Derivations" on page 65.

2.3.6 Specifying a Composition Style

An AlphaComposite encapsulates composition rules that determine how colors should be rendered when one object overlaps another. To specify the composition style for the Graphics2D context, you create an AlphaComposite and pass it into setComposite. The most commonly used is composition style is SRC_OVER.

2.3.6.1 Using the Source Over Compositing Rule

The SRC_OVER compositing rule composites the source pixel over the destination pixel such that the shared pixel takes the color of the source pixel. For example, if you render a blue rectangle and then render a red rectangle that partially over laps it, the overlapping area will be red. In other words, the object that is rendered last will appear to be on top.
To use the SRC_OVER composition rule:

Create an AlphaComposite object by calling getInstance and specifying the SRC_OVER rule.
	AlphaComposite ac = 
		AlphaComposite.getInstance(AlphaComposite.SRC_OVER);
Call setComposite to add the AlphaComposite object to the Graphics2D context.
	g2.setComposite(ac);
Once the composite object is set, overlapping objects will be rendered using the specified composition rule.

2.3.6.2 Increasing the Transparency of Composited Objects

AlphaComposite allows you to specify an additional constant alpha value that is multiplied with the alpha of the source pixels to increase transparency.
For example, to create an AlphaComposite object that renders the source object 50% transparent, specify an alpha of .5:

	AlphaComposite ac = 
		AlphaComposite.getInstance(AlphaComposite.SRC_OVER, .5f);

In the following example, a source over alpha composite object is created with an alpha of .5 and added to the graphics context, causing subsequent shapes to be rendered 50% transparent.

	public void paint(Graphics g) {
  		Graphics2D g2 = (Graphics2D) g;
  		g2.setColor(Color.red);
  		g2.translate(100,50);
  		// radians=degree * pie / 180
  		g2.rotate((45*java.lang.Math.PI)/180); 
  		g2.fillRect(0,0,100,100);
  		g2.setTransform(new AffineTransform());  // set to identity
  		// Create a new alpha composite
  		AlphaComposite ac =
      			AlphaComposite.getInstance(AlphaComposite.SRC_OVER,0.5f);
  		g2.setComposite(ac);
  		g2.setColor(Color.green);
  		g2.fillRect(50,0,100,100);
  		g2.setColor(Color.blue);
  		g2.fillRect(125,75,100,100);
  		g2.setColor(Color.yellow);
  		g2.fillRect(50,125,100,100);
  		g2.setColor(Color.pink);
  		g2.fillRect(-25,75,100,100);
	}

CONTENTS | PREV | NEXT