站内搜索: 请输入搜索关键词
当前页面: 在线文档首页 > JDK 5 Documentation v1.1.8, Java 2 SDK 英文文档

JDK 5 Documentation v1.1.8, Java 2 SDK 英文文档

Contents | Prev | Next Java Native Interface Specification


4 - JNI Functions


This chapter serves as the reference section for the JNI functions. It provides a complete listing of all the JNI functions. It also presents the exact layout of the JNI function table.

Note the use of the term "must" to describe restrictions on JNI programmers. For example, when you see that a certain JNI function must receive a non-NULL object, it is your responsibility to ensure that NULL is not passed to that JNI function. As a result, a JNI implementation does not need to perform NULL pointer checks in that JNI function.

A portion of this chapter is adapted from Netscape's JRI documentation.

The reference material groups functions by their usage. The reference section is organized by the following functional areas:


Interface Function Table

Each function is accessible at a fixed offset through the JNIEnv argument. The JNIEnv type is a pointer to a structure storing all JNI function pointers. It is defined as follows:

    typedef const struct JNINativeInterface *JNIEnv;
The VM initializes the function table, as shown by Code Example 4-1. Note that the first three entries are reserved for future compatibility with COM. In addition, we reserve a number of additional NULL entries near the beginning of the function table, so that, for example, a future class-related JNI operation can be added after FindClass, rather than at the end of the table.

Note that the function table can be shared among all JNI interface pointers.

Code Example 4-1

    const struct JNINativeInterface ... = {
        NULL,
        NULL,
        NULL,
        NULL,
        GetVersion,
    
        DefineClass,
        FindClass,
        NULL,
        NULL,
        NULL,
        GetSuperclass,
        IsAssignableFrom,
        NULL,
    
        Throw,
        ThrowNew,
        ExceptionOccurred,
        ExceptionDescribe,
        ExceptionClear,
        FatalError,
        NULL,
        NULL,
    
        NewGlobalRef,
        DeleteGlobalRef,
        DeleteLocalRef,
        IsSameObject,
        NULL,
        NULL,
    
        AllocObject,
        NewObject,
        NewObjectV,
        NewObjectA,
    
        GetObjectClass,
        IsInstanceOf,
    
        GetMethodID,
    
        CallObjectMethod,
        CallObjectMethodV,
        CallObjectMethodA,
        CallBooleanMethod,
        CallBooleanMethodV,
        CallBooleanMethodA,
        CallByteMethod,
        CallByteMethodV,
        CallByteMethodA,
        CallCharMethod,
        CallCharMethodV,
        CallCharMethodA,
        CallShortMethod,
        CallShortMethodV,
        CallShortMethodA,
        CallIntMethod,
        CallIntMethodV,
        CallIntMethodA,
        CallLongMethod,
        CallLongMethodV,
        CallLongMethodA,
        CallFloatMethod,
        CallFloatMethodV,
        CallFloatMethodA,
        CallDoubleMethod,
        CallDoubleMethodV,
        CallDoubleMethodA,
        CallVoidMethod,
        CallVoidMethodV,
        CallVoidMethodA,
    
        CallNonvirtualObjectMethod,
        CallNonvirtualObjectMethodV,
        CallNonvirtualObjectMethodA,
        CallNonvirtualBooleanMethod,
        CallNonvirtualBooleanMethodV,
        CallNonvirtualBooleanMethodA,
        CallNonvirtualByteMethod,
        CallNonvirtualByteMethodV,
        CallNonvirtualByteMethodA,
        CallNonvirtualCharMethod,
        CallNonvirtualCharMethodV,
        CallNonvirtualCharMethodA,
        CallNonvirtualShortMethod,
        CallNonvirtualShortMethodV,
        CallNonvirtualShortMethodA,
        CallNonvirtualIntMethod,
        CallNonvirtualIntMethodV,
        CallNonvirtualIntMethodA,
        CallNonvirtualLongMethod,
        CallNonvirtualLongMethodV,
        CallNonvirtualLongMethodA,
        CallNonvirtualFloatMethod,
        CallNonvirtualFloatMethodV,
        CallNonvirtualFloatMethodA,
        CallNonvirtualDoubleMethod,
        CallNonvirtualDoubleMethodV,
        CallNonvirtualDoubleMethodA,
        CallNonvirtualVoidMethod,
        CallNonvirtualVoidMethodV,
        CallNonvirtualVoidMethodA,
    
        GetFieldID,
    
        GetObjectField,
        GetBooleanField,
        GetByteField,
        GetCharField,
        GetShortField,
        GetIntField,
        GetLongField,
        GetFloatField,
        GetDoubleField,
        SetObjectField,
        SetBooleanField,
        SetByteField,
        SetCharField,
        SetShortField,
        SetIntField,
        SetLongField,
        SetFloatField,
        SetDoubleField,
    
        GetStaticMethodID,
    
        CallStaticObjectMethod,
        CallStaticObjectMethodV,
        CallStaticObjectMethodA,
        CallStaticBooleanMethod,
        CallStaticBooleanMethodV,
        CallStaticBooleanMethodA,
        CallStaticByteMethod,
        CallStaticByteMethodV,
        CallStaticByteMethodA,
        CallStaticCharMethod,
        CallStaticCharMethodV,
        CallStaticCharMethodA,
        CallStaticShortMethod,
        CallStaticShortMethodV,
        CallStaticShortMethodA,
        CallStaticIntMethod,
        CallStaticIntMethodV,
        CallStaticIntMethodA,
        CallStaticLongMethod,
        CallStaticLongMethodV,
        CallStaticLongMethodA,
        CallStaticFloatMethod,
        CallStaticFloatMethodV,
        CallStaticFloatMethodA,
        CallStaticDoubleMethod,
        CallStaticDoubleMethodV,
        CallStaticDoubleMethodA,
        CallStaticVoidMethod,
        CallStaticVoidMethodV,
        CallStaticVoidMethodA,
    
        GetStaticFieldID,
    
        GetStaticObjectField,
        GetStaticBooleanField,
        GetStaticByteField,
        GetStaticCharField,
        GetStaticShortField,
        GetStaticIntField,
        GetStaticLongField,
        GetStaticFloatField,
        GetStaticDoubleField,
    
        SetStaticObjectField,
        SetStaticBooleanField,
        SetStaticByteField,
        SetStaticCharField,
        SetStaticShortField,
        SetStaticIntField,
        SetStaticLongField,
        SetStaticFloatField,
        SetStaticDoubleField,
    
        NewString,
        GetStringLength,
        GetStringChars,
        ReleaseStringChars,
    
        NewStringUTF,
        GetStringUTFLength,
        GetStringUTFChars,
        ReleaseStringUTFChars,
    
        GetArrayLength,
     
        NewObjectArray,
        GetObjectArrayElement,
        SetObjectArrayElement,
    
        NewBooleanArray,
        NewByteArray,
        NewCharArray,
        NewShortArray,
        NewIntArray,
        NewLongArray,
        NewFloatArray,
        NewDoubleArray,
    
        GetBooleanArrayElements,
        GetByteArrayElements,
        GetCharArrayElements,
        GetShortArrayElements,
        GetIntArrayElements,
        GetLongArrayElements,
        GetFloatArrayElements,
        GetDoubleArrayElements,
    
        ReleaseBooleanArrayElements,
        ReleaseByteArrayElements,
        ReleaseCharArrayElements,
        ReleaseShortArrayElements,
        ReleaseIntArrayElements,
        ReleaseLongArrayElements,
        ReleaseFloatArrayElements,
        ReleaseDoubleArrayElements,
    
        GetBooleanArrayRegion,
        GetByteArrayRegion,
        GetCharArrayRegion,
        GetShortArrayRegion,
        GetIntArrayRegion,
        GetLongArrayRegion,
        GetFloatArrayRegion,
        GetDoubleArrayRegion,
        SetBooleanArrayRegion,
        SetByteArrayRegion,
        SetCharArrayRegion,
        SetShortArrayRegion,
        SetIntArrayRegion,
        SetLongArrayRegion,
        SetFloatArrayRegion,
        SetDoubleArrayRegion,
    
        RegisterNatives,
        UnregisterNatives,
    
        MonitorEnter,
        MonitorExit,
    
        GetJavaVM,
    };


Version Information


GetVersion

jint GetVersion(JNIEnv *env);

Returns the version of the native method interface.

PARAMETERS:

env: the JNI interface pointer.

RETURNS:

Returns the major version number in the higher 16 bits and the minor version number in the lower 16 bits.

In JDK1.1, GetVersion() returns 0x00010001.


Class Operations


DefineClass

jclass DefineClass(JNIEnv *env, jobject loader,
const jbyte *buf, jsize bufLen);

Loads a class from a buffer of raw class data.

PARAMETERS:

env: the JNI interface pointer.

loader: a class loader assigned to the defined class.

buf: buffer containing the .class file data.

bufLen: buffer length.

RETURNS:

Returns a Java class object or NULL if an error occurs.

THROWS:

ClassFormatError: if the class data does not specify a valid class.

ClassCircularityError: if a class or interface would be its own superclass or superinterface.

OutOfMemoryError: if the system runs out of memory.


FindClass

jclass FindClass(JNIEnv *env, const char *name);

This function loads a locally-defined class. It searches the directories and zip files specified by the CLASSPATH environment variable for the class with the specified name.

PARAMETERS:

env: the JNI interface pointer.

name: a fully-qualified class name (that is, a package name, delimited by "/", followed by the class name). If the name begins with "[" (the array signature character), it returns an array class.

RETURNS:

Returns a class object from a fully-qualified name, or NULL if the class cannot be found.

THROWS:

ClassFormatError: if the class data does not specify a valid class.

ClassCircularityError: if a class or interface would be its own superclass or superinterface.

NoClassDefFoundError: if no definition for a requested class or interface can be found.

OutOfMemoryError: if the system runs out of memory.


GetSuperclass

jclass GetSuperclass(JNIEnv *env, jclass clazz);

If clazz represents any class other than the class Object, then this function returns the object that represents the superclass of the class specified by clazz.

If clazz specifies the class Object, or clazz represents an interface, this function returns NULL.

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

RETURNS:

Returns the superclass of the class represented by clazz, or NULL.


IsAssignableFrom

jboolean IsAssignableFrom(JNIEnv *env, jclass clazz1,
jclass clazz2);

Determines whether an object of clazz1 can be safely cast to clazz2.

PARAMETERS:

env: the JNI interface pointer.

clazz1: the first class argument.

clazz2: the second class argument.

RETURNS:

Returns JNI_TRUE if either of the following is true:


Exceptions


Throw

jint Throw(JNIEnv *env, jthrowable obj);

Causes a java.lang.Throwable object to be thrown.

PARAMETERS:

env: the JNI interface pointer.

obj: a java.lang.Throwable object.

RETURNS:

Returns 0 on success; a negative value on failure.

THROWS:

the java.lang.Throwable object obj.


ThrowNew

jint ThrowNew(JNIEnv *env, jclass clazz,
const char *message);

Constructs an exception object from the specified class with the message specified by message and causes that exception to be thrown.

PARAMETERS:

env: the JNI interface pointer.

clazz: a subclass of java.lang.Throwable.

message: the message used to construct the java.lang.Throwable object.

RETURNS:

Returns 0 on success; a negative value on failure.

THROWS:

the newly constructed java.lang.Throwable object.


ExceptionOccurred

jthrowable ExceptionOccurred(JNIEnv *env);

Determines if an exception is being thrown. The exception stays being thrown until either the native code calls ExceptionClear(), or the Java code handles the exception.

PARAMETERS:

env: the JNI interface pointer.

RETURNS:

Returns the exception object that is currently in the process of being thrown, or NULL if no exception is currently being thrown.


ExceptionDescribe

void ExceptionDescribe(JNIEnv *env);

Prints an exception and a backtrace of the stack to a system error-reporting channel, such as stderr. This is a convenience routine provided for debugging.

PARAMETERS:

env: the JNI interface pointer.


ExceptionClear

void ExceptionClear(JNIEnv *env);

Clears any exception that is currently being thrown. If no exception is currently being thrown, this routine has no effect.

PARAMETERS:

env: the JNI interface pointer.


FatalError

void FatalError(JNIEnv *env, const char *msg);

Raises a fatal error and does not expect the VM to recover. This function does not return.

PARAMETERS:

env: the JNI interface pointer.

msg: an error message.


Global and Local References


NewGlobalRef

jobject NewGlobalRef(JNIEnv *env, jobject obj);

Creates a new global reference to the object referred to by the obj argument. The obj argument may be a global or local reference. Global references must be explicitly disposed of by calling DeleteGlobalRef().

PARAMETERS:

env: the JNI interface pointer.

obj: a global or local reference.

RETURNS:

Returns a global reference, or NULL if the system runs out of memory.


DeleteGlobalRef

void DeleteGlobalRef(JNIEnv *env, jobject globalRef);

Deletes the global reference pointed to by globalRef.

PARAMETERS:

env: the JNI interface pointer.

globalRef: a global reference.


DeleteLocalRef

void DeleteLocalRef(JNIEnv *env, jobject localRef);

Deletes the local reference pointed to by localRef.

PARAMETERS:

env: the JNI interface pointer.

localRef: a local reference.


Object Operations


AllocObject

jobject AllocObject(JNIEnv *env, jclass clazz);

Allocates a new Java object without invoking any of the constructors for the object. Returns a reference to the object.

The clazz argument must not refer to an array class.

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

RETURNS:

Returns a Java object, or NULL if the object cannot be constructed.

THROWS:

InstantiationException: if the class is an interface or an abstract class.

OutOfMemoryError: if the system runs out of memory.


NewObject
NewObjectA
NewObjectV

jobject NewObject(JNIEnv *env, jclass clazz,
jmethodID methodID, ...);

jobject NewObjectA(JNIEnv *env, jclass clazz,
jmethodID methodID, jvalue *args);

jobject NewObjectV(JNIEnv *env, jclass clazz,
jmethodID methodID, va_list args);

Constructs a new Java object. The method ID indicates which constructor method to invoke. This ID must be obtained by calling GetMethodID() with <init> as the method name and void (V) as the return type.

The clazz argument must not refer to an array class.

NewObject

Programmers place all arguments that are to be passed to the constructor immediately following the methodID argument. NewObject() accepts these arguments and passes them to the Java method that the programmer wishes to invoke.

NewObjectA

Programmers place all arguments that are to be passed to the constructor in an args array of jvalues that immediately follows the methodID argument. NewObjectA() accepts the arguments in this array, and, in turn, passes them to the Java method that the programmer wishes to invoke.

NewObjectV

Programmers place all arguments that are to be passed to the constructor in an args argument of type va_list that immediately follows the methodID argument. NewObjectV() accepts these arguments, and, in turn, passes them to the Java method that the programmer wishes to invoke.

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

methodID: the method ID of the constructor.

Additional Parameter for NewObject:

arguments to the constructor.

Additional Parameter for NewObjectA:

args: an array of arguments to the constructor.

Additional Parameter for NewObjectV:

args: a va_list of arguments to the constructor.

RETURNS:

Returns a Java object, or NULL if the object cannot be constructed.

THROWS:

InstantiationException: if the class is an interface or an abstract class.

OutOfMemoryError: if the system runs out of memory.

Any exceptions thrown by the constructor.


GetObjectClass

jclass GetObjectClass(JNIEnv *env, jobject obj);

Returns the class of an object.

PARAMETERS:

env: the JNI interface pointer.

obj: a Java object (must not be NULL).

RETURNS:

Returns a Java class object.


IsInstanceOf

jboolean IsInstanceOf(JNIEnv *env, jobject obj,
jclass clazz);

Tests whether an object is an instance of a class.

PARAMETERS:

env: the JNI interface pointer.

obj: a Java object.

clazz: a Java class object.

RETURNS:

Returns JNI_TRUE if obj can be cast to clazz; otherwise, returns JNI_FALSE. A NULL object can be cast to any class.


IsSameObject

jboolean IsSameObject(JNIEnv *env, jobject ref1,
jobject ref2);

Tests whether two references refer to the same Java object.

PARAMETERS:

env: the JNI interface pointer.

ref1: a Java object.

ref2: a Java object.

RETURNS:

Returns JNI_TRUE if ref1 and ref2 refer to the same Java object, or are both NULL; otherwise, returns JNI_FALSE.


Accessing Fields of Objects


GetFieldID

jfieldID GetFieldID(JNIEnv *env, jclass clazz,
const char *name, const char *sig);

Returns the field ID for an instance (nonstatic) field of a class. The field is specified by its name and signature. The Get<type>Field and Set<type>Field families of accessor functions use field IDs to retrieve object fields.

GetFieldID() causes an uninitialized class to be initialized.

GetFieldID() cannot be used to obtain the length field of an array. Use GetArrayLength() instead.

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

name: the field name in a 0-terminated UTF-8 string.

sig: the field signature in a 0-terminated UTF-8 string.

RETURNS:

Returns a field ID, or NULL if the operation fails.

THROWS:

NoSuchFieldError: if the specified field cannot be found.

ExceptionInInitializerError: if the class initializer fails due to an exception.

OutOfMemoryError: if the system runs out of memory.


Get<type>Field Routines

NativeType Get<type>Field(JNIEnv *env, jobject obj,
jfieldID fieldID);

This family of accessor routines returns the value of an instance (nonstatic) field of an object. The field to access is specified by a field ID obtained by calling GetFieldID().

The following table describes the Get<type>Field routine name and result type. You should replace type in Get<type>Field with the Java type of the field, or use one of the actual routine names from the table, and replace NativeType with the corresponding native type for that routine.

Table 4-1 Get<type>Field Family of Accessor Routines

Get<type>Field Routine Name Native Type
GetObjectField() jobject
GetBooleanField() jboolean
GetByteField() jbyte
GetCharField() jchar
GetShortField() jshort
GetIntField() jint
GetLongField() jlong
GetFloatField() jfloat
GetDoubleField() jdouble

PARAMETERS:

env: the JNI interface pointer.

obj: a Java object (must not be NULL).

fieldID: a valid field ID.

RETURNS:

Returns the content of the field.


Set<type>Field Routines

void Set<type>Field(JNIEnv *env, jobject obj, jfieldID fieldID,
NativeType value);

This family of accessor routines sets the value of an instance (nonstatic) field of an object. The field to access is specified by a field ID obtained by calling GetFieldID().

The following table describes the Set<type>Field routine name and value type. You should replace type in Set<type>Field with the Java type of the field, or use one of the actual routine names from the table, and replace NativeType with the corresponding native type for that routine.

Table 4-2 Set<type>Field Family of Accessor Routines

Set<type>Field Routine Native Type
SetObjectField() jobject
SetBooleanField() jboolean
SetByteField() jbyte
SetCharField() jchar
SetShortField() jshort
SetIntField() jint
SetLongField() jlong
SetFloatField() jfloat
SetDoubleField() jdouble

PARAMETERS:

env: the JNI interface pointer.

obj: a Java object (must not be NULL).

fieldID: a valid field ID.

value: the new value of the field.


Calling Instance Methods


GetMethodID

jmethodID GetMethodID(JNIEnv *env, jclass clazz,
const char *name, const char *sig);

Returns the method ID for an instance (nonstatic) method of a class or interface. The method may be defined in one of the clazz's superclasses and inherited by clazz. The method is determined by its name and signature.

GetMethodID() causes an uninitialized class to be initialized.

To obtain the method ID of a constructor, supply <init> as the method name and void (V) as the return type.

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

name: the method name in a 0-terminated UTF-8 string.

sig: the method signature in 0-terminated UTF-8 string.

RETURNS:

Returns a method ID, or NULL if the specified method cannot be found.

THROWS:

NoSuchMethodError: if the specified method cannot be found.

ExceptionInInitializerError: if the class initializer fails due to an exception.

OutOfMemoryError: if the system runs out of memory.


Call<type>Method Routines
Call<type>MethodA Routines
Call<type>MethodV Routines

NativeType Call<type>Method(JNIEnv *env, jobject obj,
jmethodID methodID, ...);

NativeType Call<type>MethodA(JNIEnv *env, jobject obj,
jmethodID methodID, jvalue *args);

NativeType Call<type>MethodV(JNIEnv *env, jobject obj,
jmethodID methodID, va_list args);

Methods from these three families of operations are used to call a Java instance method from a native method.They only differ in their mechanism for passing parameters to the methods that they call.

These families of operations invoke an instance (nonstatic) method on a Java object, according to the specified method ID. The methodID argument must be obtained by calling GetMethodID().

When these functions are used to call private methods and constructors, the method ID must be derived from the real class of obj, not from one of its superclasses.

Call<type>Method Routines

Programmers place all arguments that are to be passed to the method immediately following the methodID argument. The Call<type>Method routine accepts these arguments and passes them to the Java method that the programmer wishes to invoke.

Call<type>MethodA Routines

Programmers place all arguments to the method in an args array of jvalues that immediately follows the methodID argument. The Call<type>MethodA routine accepts the arguments in this array, and, in turn, passes them to the Java method that the programmer wishes to invoke.

Call<type>MethodV Routines

Programmers place all arguments to the method in an args argument of type va_list that immediately follows the methodID argument. The Call<type>MethodV routine accepts the arguments, and, in turn, passes them to the Java method that the programmer wishes to invoke.

The following table describes each of the method calling routines according to their result type. You should replace type in Call<type>Method with the Java type of the method you are calling (or use one of the actual method calling routine names from the table) and replace NativeType with the corresponding native type for that routine.

Table 4-3 Instance Method Calling Routines

Call<type>Method Routine Name Native Type
CallVoidMethod() CallVoidMethodA() CallVoidMethodV() void
CallObjectMethod() CallObjectMethodA() CallObjectMethodV() jobject
CallBooleanMethod() CallBooleanMethodA() CallBooleanMethodV() jboolean
CallByteMethod() CallByteMethodA() CallByteMethodV() jbyte
CallCharMethod() CallCharMethodA() CallCharMethodV() jchar
CallShortMethod() CallShortMethodA() CallShortMethodV() jshort
CallIntMethod() CallIntMethodA() CallIntMethodV() jint
CallLongMethod() CallLongMethodA() CallLongMethodV() jlong
CallFloatMethod() CallFloatMethodA() CallFloatMethodV() jfloat
CallDoubleMethod() CallDoubleMethodA() CallDoubleMethodV() jdouble

PARAMETERS:

env: the JNI interface pointer.

obj: a Java object.

methodID: a method ID.

Additional Parameter for Call<type>Method Routines:

arguments to the Java method.

Additional Parameter for Call<type>MethodA Routines:

args: an array of arguments.

Additional Parameter for Call<type>MethodV Routines:

args: a va_list of arguments.

RETURNS:

Returns the result of calling the Java method.

THROWS:

Exceptions raised during the execution of the Java method.


CallNonvirtual<type>Method Routines
CallNonvirtual<type>MethodA Routines
CallNonvirtual<type>MethodV Routines

NativeType CallNonvirtual<type>Method(JNIEnv *env, jobject obj,
jclass clazz, jmethodID methodID, ...);

NativeType CallNonvirtual<type>MethodA(JNIEnv *env, jobject obj,
jclass clazz, jmethodID methodID, jvalue *args);

NativeType CallNonvirtual<type>MethodV(JNIEnv *env, jobject obj,
jclass clazz, jmethodID methodID, va_list args);

These families of operations invoke an instance (nonstatic) method on a Java object, according to the specified class and method ID. The methodID argument must be obtained by calling GetMethodID() on the class clazz.

The CallNonvirtual<type>Method families of routines and the Call<type>Method families of routines are different. Call<type>Method routines invoke the method based on the class of the object, while CallNonvirtual<type>Method routines invoke the method based on the class, designated by the clazz parameter, from which the method ID is obtained. The method ID must be obtained from the real class of the object or from one of its superclasses.

CallNonvirtual<type>Method Routines

Programmers place all arguments that are to be passed to the method immediately following the methodID argument. The CallNonvirtual<type>Method routine accepts these arguments and passes them to the Java method that the programmer wishes to invoke.

CallNonvirtual<type>MethodA Routines

Programmers place all arguments to the method in an args array of jvalues that immediately follows the methodID argument. The CallNonvirtual<type>MethodA routine accepts the arguments in this array, and, in turn, passes them to the Java method that the programmer wishes to invoke.

CallNonvirtual<type>MethodV Routines

Programmers place all arguments to the method in an args argument of type va_list that immediately follows the methodID argument. The CallNonvirtualMethodV routine accepts the arguments, and, in turn, passes them to the Java method that the programmer wishes to invoke.

The following table describes each of the method calling routines according to their result type. You should replace type in CallNonvirtual<type>Method with the Java type of the method, or use one of the actual method calling routine names from the table, and replace NativeType with the corresponding native type for that routine.

Table 4-4 CallNonvirtual<type>Method Routines

CallNonvirtual<type>Method Routine Name Native Type
CallNonvirtualVoidMethod() CallNonvirtualVoidMethodA() CallNonvirtualVoidMethodV() void
CallNonvirtualObjectMethod() CallNonvirtualObjectMethodA() CallNonvirtualObjectMethodV() jobject
CallNonvirtualBooleanMethod() CallNonvirtualBooleanMethodA() CallNonvirtualBooleanMethodV() jboolean
CallNonvirtualByteMethod() CallNonvirtualByteMethodA() CallNonvirtualByteMethodV() jbyte
CallNonvirtualCharMethod() CallNonvirtualCharMethodA() CallNonvirtualCharMethodV() jchar
CallNonvirtualShortMethod() CallNonvirtualShortMethodA() CallNonvirtualShortMethodV() jshort
CallNonvirtualIntMethod() CallNonvirtualIntMethodA() CallNonvirtualIntMethodV() jint
CallNonvirtualLongMethod() CallNonvirtualLongMethodA() CallNonvirtualLongMethodV() jlong
CallNonvirtualFloatMethod() CallNonvirtualFloatMethodA() CallNonvirtualFloatMethodV() jfloat
CallNonvirtualDoubleMethod() CallNonvirtualDoubleMethodA() CallNonvirtualDoubleMethodV() jdouble

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class.

obj: a Java object.

methodID: a method ID.

Additional Parameter for CallNonvirtual<type>Method Routines:

arguments to the Java method.

Additional Parameter for CallNonvirtual<type>MethodA Routines:

args: an array of arguments.

Additional Parameter for CallNonvirtual<type>MethodV Routines:

args: a va_list of arguments.

RETURNS:

Returns the result of calling the Java method.

THROWS:

Exceptions raised during the execution of the Java method.


Accessing Static Fields


GetStaticFieldID

jfieldID GetStaticFieldID(JNIEnv *env, jclass clazz,
const char *name, const char *sig);

Returns the field ID for a static field of a class. The field is specified by its name and signature. The GetStatic<type>Field and SetStatic<type>Field families of accessor functions use field IDs to retrieve static fields.

GetStaticFieldID() causes an uninitialized class to be initialized.

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

name: the static field name in a 0-terminated UTF-8 string.

sig: the field signature in a 0-terminated UTF-8 string.

RETURNS:

Returns a field ID, or NULL if the specified static field cannot be found.

THROWS:

NoSuchFieldError: if the specified static field cannot be found.

ExceptionInInitializerError: if the class initializer fails due to an exception.

OutOfMemoryError: if the system runs out of memory.


GetStatic<type>Field Routines

NativeType GetStatic<type>Field(JNIEnv *env, jclass clazz,
jfieldID fieldID);

This family of accessor routines returns the value of a static field of an object. The field to access is specified by a field ID, which is obtained by calling GetStaticFieldID().

The following table describes the family of get routine names and result types. You should replace type in GetStatic<type>Field with the Java type of the field, or one of the actual static field accessor routine names from the table, and replace NativeType with the corresponding native type for that routine.

Table 4-5 GetStatic<type>Field Family of Accessor Routines

GetStatic<type>Field Routine Name Native Type
GetStaticObjectField() jobject
GetStaticBooleanField() jboolean
GetStaticByteField() jbyte
GetStaticCharField() jchar
GetStaticShortField() jshort
GetStaticIntField() jint
GetStaticLongField() jlong
GetStaticFloatField() jfloat
GetStaticDoubleField() jdouble

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

fieldID: a static field ID.

RETURNS:

Returns the content of the static field.


SetStatic<type>Field Routines

void SetStatic<type>Field(JNIEnv *env, jclass clazz,
jfieldID fieldID,
NativeType value);

This family of accessor routines sets the value of a static field of an object. The field to access is specified by a field ID, which is obtained by calling GetStaticFieldID().

The following table describes the set routine name and value types. You should replace type in SetStatic<type>Field with the Java type of the field, or one of the actual set static field routine names from the table, and replace NativeType with the corresponding native type for that routine.

Table 4-6 SetStatic<type>Field Family of Accessor Routines

SetStatic<type>Field Routine Name NativeType
SetStaticObjectField() jobject
SetStaticBooleanField() jboolean
SetStaticByteField() jbyte
SetStaticCharField() jchar
SetStaticShortField() jshort
SetStaticIntField() jint
SetStaticLongField() jlong
SetStaticFloatField() jfloat
SetStaticDoubleField() jdouble

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

fieldID: a static field ID.

value: the new value of the field.


Calling Static Methods


GetStaticMethodID

jmethodID GetStaticMethodID(JNIEnv *env, jclass clazz,
const char *name, const char *sig);

Returns the method ID for a static method of a class. The method is specified by its name and signature.

GetStaticMethodID() causes an uninitialized class to be initialized.

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

name: the static method name in a 0-terminated UTF-8 string.

sig: the method signature in a 0-terminated UTF-8 string.

RETURNS:

Returns a method ID, or NULL if the operation fails.

THROWS:

NoSuchMethodError: if the specified static method cannot be found.

ExceptionInInitializerError: if the class initializer fails due to an exception.

OutOfMemoryError: if the system runs out of memory.


CallStatic<type>Method Routines
CallStatic<type>MethodA Routines
CallStatic<type>MethodV Routines

NativeType CallStatic<type>Method(JNIEnv *env, jclass clazz,
jmethodID methodID, ...);

NativeType CallStatic<type>MethodA(JNIEnv *env, jclass clazz,
jmethodID methodID, jvalue *args);

NativeType CallStatic<type>MethodV(JNIEnv *env, jclass clazz,
jmethodID methodID, va_list args);

This family of operations invokes a static method on a Java object, according to the specified method ID. The methodID argument must be obtained by calling GetStaticMethodID().

The method ID must be derived from clazz, not from one of its superclasses.

CallStatic<type>Method Routines

Programmers should place all arguments that are to be passed to the method immediately following the methodID argument. The CallStatic<type>Method routine accepts these arguments and passes them to the Java method that the programmer wishes to invoke.

CallStatic<type>MethodA Routines

Programmers should place all arguments to the method in an args array of jvalues that immediately follows the methodID argument. The CallStaticMethodA routine accepts the arguments in this array, and, in turn, passes them to the Java method that the programmer wishes to invoke.

CallStatic<type>MethodV Routines

Programmers should place all arguments to the method in an args argument of type va_list that immediately follows the methodID argument. The CallStaticMethodV routine accepts the arguments, and, in turn, passes them to the Java method that the programmer wishes to invoke.

The following table describes each of the method calling routines according to their result types. You should replace type in CallStatic<type>Method with the Java type of the method, or one of the actual method calling routine names from the table, and replace NativeType with the corresponding native type for that routine.

Table 4-7 CallStatic<type>Method Calling Routines

CallStatic<type>Method Routine Name Native Type
CallStaticVoidMethod() CallStaticVoidMethodA() CallStaticVoidMethodV() void
CallStaticObjectMethod() CallStaticObjectMethodA() CallStaticObjectMethodV() jobject
CallStaticBooleanMethod() CallStaticBooleanMethodA() CallStaticBooleanMethodV() jboolean
CallStaticByteMethod() CallStaticByteMethodA() CallStaticByteMethodV() jbyte
CallStaticCharMethod() CallStaticCharMethodA() CallStaticCharMethodV() jchar
CallStaticShortMethod() CallStaticShortMethodA() CallStaticShortMethodV() jshort
CallStaticIntMethod() CallStaticIntMethodA() CallStaticIntMethodV() jint
CallStaticLongMethod() CallStaticLongMethodA() CallStaticLongMethodV() jlong
CallStaticFloatMethod() CallStaticFloatMethodA() CallStaticFloatMethodV() jfloat
CallStaticDoubleMethod() CallStaticDoubleMethodA() CallStaticDoubleMethodV() jdouble

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

methodID: a static method ID.

Additional Parameter for CallStatic<type>Method Routines:

arguments to the static method.

Additional Parameter for CallStatic<type>MethodA Routines:

args: an array of arguments.

Additional Parameter for CallStatic<type>MethodV Routines:

args: a va_list of arguments.

RETURNS:

Returns the result of calling the static Java method.

THROWS:

Exceptions raised during the execution of the Java method.


String Operations


NewString

jstring NewString(JNIEnv *env, const jchar *unicodeChars,
jsize len);

Constructs a new java.lang.String object from an array of Unicode characters.

PARAMETERS:

env: the JNI interface pointer.

unicodeChars: pointer to a Unicode string.

len: length of the Unicode string.

RETURNS:

Returns a Java string object, or NULL if the string cannot be constructed.

THROWS:

OutOfMemoryError: if the system runs out of memory.


GetStringLength

jsize GetStringLength(JNIEnv *env, jstring string);

Returns the length (the count of Unicode characters) of a Java string.

PARAMETERS:

env: the JNI interface pointer.

string: a Java string object.

RETURNS:

Returns the length of the Java string.


GetStringChars

const jchar * GetStringChars(JNIEnv *env, jstring string,
jboolean *isCopy);

Returns a pointer to the array of Unicode characters of the string. This pointer is valid until ReleaseStringchars() is called.

If isCopy is not NULL, then *isCopy is set to JNI_TRUE if a copy is made; or it is set to JNI_FALSE if no copy is made.

PARAMETERS:

env: the JNI interface pointer.

string: a Java string object.

isCopy: a pointer to a boolean.

RETURNS:

Returns a pointer to a Unicode string, or NULL if the operation fails.


ReleaseStringChars

void ReleaseStringChars(JNIEnv *env, jstring string,
const jchar *chars);

Informs the VM that the native code no longer needs access to chars. The chars argument is a pointer obtained from string using GetStringChars().

PARAMETERS:

env: the JNI interface pointer.

string: a Java string object.

chars: a pointer to a Unicode string.


NewStringUTF

jstring NewStringUTF(JNIEnv *env, const char *bytes);

Constructs a new java.lang.String object from an array of UTF-8 characters.

PARAMETERS:

env: the JNI interface pointer, or NULL if the string cannot be constructed.

bytes: the pointer to a UTF-8 string.

RETURNS:

Returns a Java string object, or NULL if the string cannot be constructed.

THROWS:

OutOfMemoryError: if the system runs out of memory.


GetStringUTFLength

jsize GetStringUTFLength(JNIEnv *env, jstring string);

Returns the UTF-8 length in bytes of a string.

PARAMETERS:

env: the JNI interface pointer.

string: a Java string object.

RETURNS:

Returns the UTF-8 length of the string.


GetStringUTFChars

const char* GetStringUTFChars(JNIEnv *env, jstring string,
jboolean *isCopy);

Returns a pointer to an array of UTF-8 characters of the string. This array is valid until it is released by ReleaseStringUTFChars().

If isCopy is not NULL, then *isCopy is set to JNI_TRUE if a copy is made; or it is set to JNI_FALSE if no copy is made.

PARAMETERS:

env: the JNI interface pointer.

string: a Java string object.

isCopy: a pointer to a boolean.

RETURNS:

Returns a pointer to a UTF-8 string, or NULL if the operation fails.


ReleaseStringUTFChars

void ReleaseStringUTFChars(JNIEnv *env, jstring string,
const char *utf);

Informs the VM that the native code no longer needs access to utf. The utf argument is a pointer derived from string using GetStringUTFChars().

PARAMETERS:

env: the JNI interface pointer.

string: a Java string object.

utf: a pointer to a UTF-8 string.


Array Operations


GetArrayLength

jsize GetArrayLength(JNIEnv *env, jarray array);

Returns the number of elements in the array.

PARAMETERS:

env: the JNI interface pointer.

array: a Java array object.

RETURNS:

Returns the length of the array.


NewObjectArray

jarray NewObjectArray(JNIEnv *env, jsize length,
jclass elementClass, jobject initialElement);

Constructs a new array holding objects in class elementClass. All elements are initially set to initialElement.

PARAMETERS:

env: the JNI interface pointer.

length: array size.

elementClass: array element class.

initialElement: initialization value.

RETURNS:

Returns a Java array object, or NULL if the array cannot be constructed.

THROWS:

OutOfMemoryError: if the system runs out of memory.


GetObjectArrayElement

jobject GetObjectArrayElement(JNIEnv *env,
jobjectArray array, jsize index);

Returns an element of an Object array.

PARAMETERS:

env: the JNI interface pointer.

array: a Java array.

index: array index.

RETURNS:

Returns a Java object.

THROWS:

ArrayIndexOutOfBoundsException: if index does not specify a valid index in the array.


SetObjectArrayElement

void SetObjectArrayElement(JNIEnv *env, jobjectArray array,
jsize index, jobject value);

Sets an element of an Object array.

PARAMETERS:

env: the JNI interface pointer.

array: a Java array.

index: array index.

value: the new value.

THROWS:

ArrayIndexOutOfBoundsException: if index does not specify a valid index in the array.

ArrayStoreException: if the class of value is not a subclass of the element class of the array.


New<PrimitiveType>Array Routines

ArrayType New<PrimitiveType>Array(JNIEnv *env, jsize length);

A family of operations used to construct a new primitive array object. Table 4-8 describes the specific primitive array constructors. You should replace New<PrimitiveType>Array with one of the actual primitive array constructor routine names from the following table, and replace ArrayType with the corresponding array type for that routine.

Table 4-8 New<PrimitiveType>Array Family of Array Constructors

New<PrimitiveType>Array Routines Array Type
NewBooleanArray() jbooleanArray
NewByteArray() jbyteArray
NewCharArray() jcharArray
NewShortArray() jshortArray
NewIntArray() jintArray
NewLongArray() jlongArray
NewFloatArray() jfloatArray
NewDoubleArray() jdoubleArray

PARAMETERS:

env: the JNI interface pointer.

length: the array length.

RETURNS:

Returns a Java array, or NULL if the array cannot be constructed.


Get<PrimitiveType>ArrayElements Routines

NativeType *Get<PrimitiveType>ArrayElements(JNIEnv *env,
ArrayType array, jboolean *isCopy);

A family of functions that returns the body of the primitive array. The result is valid until the corresponding Release<PrimitiveType>ArrayElements() function is called. Since the returned array may be a copy of the Java array, changes made to the returned array will not necessarily be reflected in the original array until Release<PrimitiveType>ArrayElements() is called.

If isCopy is not NULL, then *isCopy is set to JNI_TRUE if a copy is made; or it is set to JNI_FALSE if no copy is made.

The following table describes the specific primitive array element accessors. You should make the following substitutions:

Regardless of how boolean arrays are represented in the Java VM, GetBooleanArrayElements() always returns a pointer to jbooleans, with each byte denoting an element (the unpacked representation). All arrays of other types are guaranteed to be contiguous in memory.

Table 4-9 Get<PrimitiveType>ArrayElements Family of Accessor Routines

Get<PrimitiveType>ArrayElements Routines Array Type Native Type
GetBooleanArrayElements() jbooleanArray jboolean
GetByteArrayElements() jbyteArray jbyte
GetCharArrayElements() jcharArray jchar
GetShortArrayElements() jshortArray jshort
GetIntArrayElements() jintArray jint
GetLongArrayElements() jlongArray jlong
GetFloatArrayElements() jfloatArray jfloat
GetDoubleArrayElements() jdoubleArray jdouble

PARAMETERS:

env: the JNI interface pointer.

array: a Java string object.

isCopy: a pointer to a boolean.

RETURNS:

Returns a pointer to the array elements, or NULL if the operation fails.


Release<PrimitiveType>ArrayElements Routines

void Release<PrimitiveType>ArrayElements(JNIEnv *env,
ArrayType array, NativeType *elems, jint mode);

A family of functions that informs the VM that the native code no longer needs access to elems. The elems argument is a pointer derived from array using the corresponding Get<PrimitiveType>ArrayElements() function. If necessary, this function copies back all changes made to elems to the original array.

The mode argument provides information on how the array buffer should be released. mode has no effect if elems is not a copy of the elements in array. Otherwise, mode has the following impact, as shown in the following table:

Table 4-10 Primitive Array Release Modes

mode actions
0 copy back the content and free the elems buffer
JNI_COMMIT copy back the content but do not free the elems buffer
JNI_ABORT free the buffer without copying back the possible changes

In most cases, programmers pass "0" to the mode argument to ensure consistent behavior for both pinned and copied arrays. The other options give the programmer more control over memory management and should be used with extreme care.

The next table describes the specific routines that comprise the family of primitive array disposers. You should make the following substitutions:

Table 4-11 Release<PrimitiveType>ArrayElements Family of Array Routines

Release<PrimitiveType>ArrayElements Routines Array Type Native Type
ReleaseBooleanArrayElements() jbooleanArray jboolean
ReleaseByteArrayElements() jbyteArray jbyte
ReleaseCharArrayElements() jcharArray jchar
ReleaseShortArrayElements() jshortArray jshort
ReleaseIntArrayElements() jintArray jint
ReleaseLongArrayElements() jlongArray jlong
ReleaseFloatArrayElements() jfloatArray jfloat
ReleaseDoubleArrayElements() jdoubleArray jdouble

PARAMETERS:

env: the JNI interface pointer.

array: a Java array object.

elems: a pointer to array elements.

mode: the release mode.


Get<PrimitiveType>ArrayRegion Routines

void Get<PrimitiveType>ArrayRegion(JNIEnv *env, ArrayType array,
jsize start, jsize len,
NativeType *buf);

A family of functions that copies a region of a primitive array into a buffer.

The following table describes the specific primitive array element accessors. You should do the following substitutions:

Table 4-12 Get<PrimitiveType>ArrayRegion Family of Array Accessor Routines

Get<PrimitiveType>ArrayRegion Routine Array Type Native Type
GetBooleanArrayRegion() jbooleanArray jboolean
GetByteArrayRegion() jbyteArray jbyte
GetCharArrayRegion() jcharArray jchar
GetShortArrayRegion() jshortArray jhort
GetIntArrayRegion() jintArray jint
GetLongArrayRegion() jlongArray jlong
GetFloatArrayRegion() jfloatArray jloat
GetDoubleArrayRegion() jdoubleArray jdouble

PARAMETERS:

env: the JNI interface pointer.

array: a Java array.

start: the starting index.

len: the number of elements to be copied.

buf: the destination buffer.

THROWS:

ArrayIndexOutOfBoundsException: if one of the indexes in the region is not valid.


Set<PrimitiveType>ArrayRegion Routines

void Set<PrimitiveType>ArrayRegion(JNIEnv *env, ArrayType array,
jsize start, jsize len,
NativeType *buf);

A family of functions that copies back a region of a primitive array from a buffer.

The following table describes the specific primitive array element accessors. You should make the following replacements:

PARAMETERS:

env: the JNI interface pointer.

array: a Java array.

start: the starting index.

len: the number of elements to be copied.

buf: the source buffer.

THROWS:

ArrayIndexOutOfBoundsException: if one of the indexes in the region is not valid.


Registering Native Methods


RegisterNatives

jint RegisterNatives(JNIEnv *env, jclass clazz,
const JNINativeMethod *methods, jint nMethods);

Registers native methods with the class specified by the clazz argument. The methods parameter specifies an array of JNINativeMethod structures that contain the names, signatures, and function pointers of the native methods. The nMethods parameter specifies the number of native methods in the array. The JNINativeMethod structure is defined as follows:

    typedef struct {
        char *name;
        char *signature;
        void *fnPtr;
    } JNINativeMethod;
The function pointers nominally must have the following signature:

    ReturnType (*fnPtr)(JNIEnv *env, jobject objectOrClass, ...);

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

methods: the native methods in the class.

nMethods: the number of native methods in the class.

RETURNS:

Returns "0" on success; returns a negative value on failure.

THROWS:

NoSuchMethodError: if a specified method cannot be found or if the method is not native.


UnregisterNatives

jint UnregisterNatives(JNIEnv *env, jclass clazz);

Unregisters native methods of a class. The class goes back to the state before it was linked or registered with its native method functions.

This function should not be used in normal native code. Instead, it provides special programs a way to reload and relink native libraries.

PARAMETERS:

env: the JNI interface pointer.

clazz: a Java class object.

RETURNS:

Returns "0" on success; returns a negative value on failure.


Monitor Operations


MonitorEnter

jint MonitorEnter(JNIEnv *env, jobject obj);

Enters the monitor associated with the underlying Java object referred to by obj.

Each Java object has a monitor associated with it. If the current thread already owns the monitor associated with obj, it increments a counter in the monitor indicating the number of times this thread has entered the monitor. If the monitor associated with obj is not owned by any thread, the current thread becomes the owner of the monitor, setting the entry count of this monitor to 1. If another thread already owns the monitor associated with obj, the current thread waits until the monitor is released, then tries again to gain ownership.

PARAMETERS:

env: the JNI interface pointer.

obj: a normal Java object or class object.

RETURNS:

Returns "0" on success; returns a negative value on failure.


MonitorExit

jint MonitorExit(JNIEnv *env, jobject obj);

The current thread must be the owner of the monitor associated with the underlying Java object referred to by obj. The thread decrements the counter indicating the number of times it has entered this monitor. If the value of the counter becomes zero, the current thread releases the monitor.

PARAMETERS:

env: the JNI interface pointer.

obj: a normal Java object or class object.

RETURNS:

Returns "0" on success; returns a negative value on failure.


Java VM Interface


GetJavaVM

jint GetJavaVM(JNIEnv *env, JavaVM **vm);

Returns the Java VM interface (used in the Invocation API) associated with the current thread. The result is placed at the location pointed to by the second argument, vm.

PARAMETERS:

env: the JNI interface pointer.

vm: a pointer to where the result should be placed.

RETURNS:

Returns "0" on success; returns a negative value on failure.


Contents | Prev | Next

Java Native Interface Specification (HTML generated by dkramer on March 15, 1997)
Copyright © 1996, 1997 Sun Microsystems, Inc. All rights reserved
Please send any comments or corrections to jni@java.sun.com